Product ITEM is unavailable. See products from the same category below.
Wire Strippers & Cable Slitters
Wire strippers and cable slitters make precise cuts to remove insulation, jackets, and coatings without damaging wire and cable strands. They expose bare wire and cable to prepare for splicing and connecting to terminals. Electricians and cable installers use these stripping tools to properly strip wire and cable, ensuring reliable connectivity and signal transmission.
This skinning knife has a length of 7½ inch, plus it weighs 0.15 pounds and is insulated. The plastic handle is red/yellow with an ergonomic style/type. It features back of blade plastic coated to avoid short circuit, thumb recess and finger hook at the end and more and meets the standards for IEC 60900 DIN EN 60900, VDE. In addition, it is made of steel and is tether ready. This skinning knife is designed for: cables and includes protective cap.
This skinning knife has a length of 7½ inch, plus it weighs 0.15 pounds and is insulated. The plastic handle is red/yellow with an ergonomic style/type. It features back of blade plastic coated to avoid short circuit, thumb recess and finger hook at the end and more and meets the standards for IEC 60900 DIN EN 60900, VDE. In addition, it is made of steel and is tether ready. This skinning knife is designed for: cables and includes protective cap.
For stripping outer sheath, shield and insulation in a single process. Three built in blades. The cutting depth of each blade can be adjusted individually by means of a hexagonal key (allen key). The blade remains constant. Housing: plastic, imapct-proof
For stripping outer sheath, shield and insulation in a single process. Three built in blades. The cutting depth of each blade can be adjusted individually by means of a hexagonal key (allen key). The blade remains constant. Housing: plastic, imapct-proof
This skinning knife has a length of 7½ inch, plus it weighs 0.141 pounds and is insulated. The plastic handle is red/yellow with an ergonomic style/type. It features back of blade is plastic coated and meets the standards for DIN EN 60900, IEC 60900. In addition, it is made of steel and is not tether ready. This skinning knife is designed for: cables and includes hinged blade guard, slip guard.
This skinning knife has a length of 7½ inch, plus it weighs 0.141 pounds and is insulated. The plastic handle is red/yellow with an ergonomic style/type. It features back of blade is plastic coated and meets the standards for DIN EN 60900, IEC 60900. In addition, it is made of steel and is not tether ready. This skinning knife is designed for: cables and includes hinged blade guard, slip guard.
The ideal pliers for cable work. For gripping and bending wire. For cutting soft, medium and hard wire. Precision cutting edges additionally induction hardened, cutting edge hardness approx. 60 HRC
The ideal pliers for cable work. For gripping and bending wire. For cutting soft, medium and hard wire. Precision cutting edges additionally induction hardened, cutting edge hardness approx. 60 HRC
The ideal pliers for cable work. For gripping and bending wire. For cutting soft, medium and hard wire. Precision cutting edges additionally induction hardened, cutting edge hardness approx. 60 HRC
The ideal pliers for cable work. For gripping and bending wire. For cutting soft, medium and hard wire. Precision cutting edges additionally induction hardened, cutting edge hardness approx. 60 HRC
For cutting cables, stripping wire and crimping insulted and non-insulated terminals, connectors and plug type connectors. Threaded holes for cutting copper and brass screws threaded M 7/64, 1/8, 5/32, 13/64. Special Steel: high strength
For cutting cables, stripping wire and crimping insulted and non-insulated terminals, connectors and plug type connectors. Threaded holes for cutting copper and brass screws threaded M 7/64, 1/8, 5/32, 13/64. Special Steel: high strength
This cable stripper has a length of 5¼ inch, plus it weighs 95 g and is not insulated. It features self-tightening holding lever, spare blade inside the handle, turnable blade for circular and more and meets the standards for ASTM. In addition, it is made of stainless steel, plastic, and is not tether ready with a standard cushion grip. This cable stripper is designed for: stripping.
This cable stripper has a length of 5¼ inch, plus it weighs 95 g and is not insulated. It features self-tightening holding lever, spare blade inside the handle, turnable blade for circular and more and meets the standards for ASTM. In addition, it is made of stainless steel, plastic, and is not tether ready with a standard cushion grip. This cable stripper is designed for: stripping.
This wire stripper has a length of 9½ inch, plus it weighs 270 g and is not insulated. The handle has a standard style/type. It features bolted joint and meets the standards for ASTM. In addition, it is made of steel, steel and is not tether ready with a standard cushion grip. This wire stripper is designed for: crimping.
This wire stripper has a length of 9½ inch, plus it weighs 270 g and is not insulated. The handle has a standard style/type. It features bolted joint and meets the standards for ASTM. In addition, it is made of steel, steel and is not tether ready with a standard cushion grip. This wire stripper is designed for: crimping.
This wire stripper has a length of 7 inch, plus it weighs 368 g and is not insulated. The handle has a standard style/type. It features leaves wire undamaged, length stop, replaceable blades, strips multi-stranded conductors, spr and more. In addition, it is made of steel, plastic, and is not tether ready with a standard cushion grip. This wire stripper is designed for: wiring.
This wire stripper has a length of 7 inch, plus it weighs 368 g and is not insulated. The handle has a standard style/type. It features leaves wire undamaged, length stop, replaceable blades, strips multi-stranded conductors, spr and more. In addition, it is made of steel, plastic, and is not tether ready with a standard cushion grip. This wire stripper is designed for: wiring.
Form-fit stripping of both stranded and difficult to remove insulating materials such as PTFE, Silicone, Radox, Kapton and rubber including multi-layer insulations.
Form-fit stripping of both stranded and difficult to remove insulating materials such as PTFE, Silicone, Radox, Kapton and rubber including multi-layer insulations.
This crimper has a length of 8 inch, plus it weighs 0.6 pounds and is insulated. It features 1,000v multi component grips, 6 functions, astm f1505 tested, cable shears with induction har and more and meets the standards for ASTM F1505. In addition, it is made of steel, with a deluxe cushion grip.
This crimper has a length of 8 inch, plus it weighs 0.6 pounds and is insulated. It features 1,000v multi component grips, 6 functions, astm f1505 tested, cable shears with induction har and more and meets the standards for ASTM F1505. In addition, it is made of steel, with a deluxe cushion grip.
This wire stripper has a length of 5½ inch, plus it weighs 99 g and is not insulated. The handle has a standard style/type. It features easy adjustment to the required diameter of solid or stranded wire, knurled screw and lock nut. In addition, it is made of steel, steel and is not tether ready with a standard cushion grip. This wire stripper is designed for: electrical.
This wire stripper has a length of 5½ inch, plus it weighs 99 g and is not insulated. The handle has a standard style/type. It features easy adjustment to the required diameter of solid or stranded wire, knurled screw and lock nut. In addition, it is made of steel, steel and is not tether ready with a standard cushion grip. This wire stripper is designed for: electrical.
This wire stripper has a length of 6¼ inch, plus it weighs 0.58 pounds and is not insulated. The handle has a standard style/type. It features easy adjustment to the required diameter of solid or stranded wire, knurled screw and lock nut and meets the standards for DIN EN 60900, IEC 60900. In addition, it is made of steel, steel and is not tether ready with a standard cushion grip. This wire stripper is designed for: stripping.
This wire stripper has a length of 6¼ inch, plus it weighs 0.58 pounds and is not insulated. The handle has a standard style/type. It features easy adjustment to the required diameter of solid or stranded wire, knurled screw and lock nut and meets the standards for DIN EN 60900, IEC 60900. In addition, it is made of steel, steel and is not tether ready with a standard cushion grip. This wire stripper is designed for: stripping.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
