Product ITEM is unavailable. See products from the same category below.
Wire Strippers & Cable Slitters
Wire strippers and cable slitters make precise cuts to remove insulation, jackets, and coatings without damaging wire and cable strands. They expose bare wire and cable to prepare for splicing and connecting to terminals. Electricians and cable installers use these stripping tools to properly strip wire and cable, ensuring reliable connectivity and signal transmission.
This wire stripper has a length of 7 inch, plus it weighs 9.6 ounce and is insulated. The handle has a standard style/type. It features spring loaded action for self opening and meets the standards for 2011 ed., CSA Z462, ASTM F1505-10, CAN/ULC-60900-09, IEC 60900: 2018, NFPA 70E. In addition, it is made of steel, steel and is not tether ready with a standard cushion grip. This wire stripper is designed for: cutting, looping, stripping.
This wire stripper has a length of 7 inch, plus it weighs 9.6 ounce and is insulated. The handle has a standard style/type. It features spring loaded action for self opening and meets the standards for 2011 ed., CSA Z462, ASTM F1505-10, CAN/ULC-60900-09, IEC 60900: 2018, NFPA 70E. In addition, it is made of steel, steel and is not tether ready with a standard cushion grip. This wire stripper is designed for: cutting, looping, stripping.
This dual-wire stripper/cutter has a length of 6¼ inch, plus it weighs 4.3 ounce. It features strips two wires in a single motion, paired stripping holes for 14 and 12 awg solid wire and more. In addition, it has a textured grip. This dual-wire stripper/cutter is designed for: wire cutting, wire stripping.
This dual-wire stripper/cutter has a length of 6¼ inch, plus it weighs 4.3 ounce. It features strips two wires in a single motion, paired stripping holes for 14 and 12 awg solid wire and more. In addition, it has a textured grip. This dual-wire stripper/cutter is designed for: wire cutting, wire stripping.
Lineman's plastic handle skinning knife. Blade length 3 inches. Built extra strong for line work. Tough, tempered steel blade with the blade back ground flat for scrapping copper wire. Rugged, molded-on plastic handle. Large finger guard. With handle ring.
Lineman's plastic handle skinning knife. Blade length 3 inches. Built extra strong for line work. Tough, tempered steel blade with the blade back ground flat for scrapping copper wire. Rugged, molded-on plastic handle. Large finger guard. With handle ring.
Strips and cuts Canada's unique Romex(R) cable with precision and ease. Quickly removes outer jacket of Canadian NMD-90 14/2 or 12/2 Romex(R) cable. Cleanly shears 6-32 and 8-32 screws. Serrated nose bends, shapes and pulls wire. Double-dipped comfort grips.
Strips and cuts Canada's unique Romex(R) cable with precision and ease. Quickly removes outer jacket of Canadian NMD-90 14/2 or 12/2 Romex(R) cable. Cleanly shears 6-32 and 8-32 screws. Serrated nose bends, shapes and pulls wire. Double-dipped comfort grips.
This wire stripper has a length of 7¼ inch, plus it weighs 0.44 pounds and is not insulated. The handle has a angled style/type. It features spring loaded. In addition, it is made of steel, steel, with a comfort grip. This wire stripper is designed for: cutting, stripping.
This wire stripper has a length of 7¼ inch, plus it weighs 0.44 pounds and is not insulated. The handle has a angled style/type. It features spring loaded. In addition, it is made of steel, steel, with a comfort grip. This wire stripper is designed for: cutting, stripping.
This radial cable stripper cartridge has a length of ⅜ inch, plus it weighs 1 ounce and is not insulated. It features designed for use with dual cartridge radial stripper and radial cartridge strippers, inchv'' not and more. In addition, it is made of steel, polycarbonate, and is not tether ready. This radial cable stripper cartridge is designed for: cable preparation.
This radial cable stripper cartridge has a length of ⅜ inch, plus it weighs 1 ounce and is not insulated. It features designed for use with dual cartridge radial stripper and radial cartridge strippers, inchv'' not and more. In addition, it is made of steel, polycarbonate, and is not tether ready. This radial cable stripper cartridge is designed for: cable preparation.
Cable-splicer's knife, special-purpose short blade with comfortable, full-sized, heavy-duty handle. Coping-type blade made of the finest cutlery steel, tough and carefully tempered to hold its edge.
Cable-splicer's knife, special-purpose short blade with comfortable, full-sized, heavy-duty handle. Coping-type blade made of the finest cutlery steel, tough and carefully tempered to hold its edge.
This radial cable stripper has a length of 4⅝ inch, plus it weighs 1.2 ounce and is not insulated. It features accurate and repeatable strips, exclusive sliding cable stop pre-measures cable for fast, pre and more. In addition, it is made of steel, plastic, and is not tether ready. This radial cable stripper is designed for: cable preparation.
This radial cable stripper has a length of 4⅝ inch, plus it weighs 1.2 ounce and is not insulated. It features accurate and repeatable strips, exclusive sliding cable stop pre-measures cable for fast, pre and more. In addition, it is made of steel, plastic, and is not tether ready. This radial cable stripper is designed for: cable preparation.
These pliers has a length of 9 11/32 inches and is not insulated. The handle has a handform style/type. It features pliers with split ring for tethering for fall protection while working at height, high levera and more. In addition, it is made of steel. These pliers is designed for: #8 awg copper, aluminum, soft metal.
These pliers has a length of 9 11/32 inches and is not insulated. The handle has a handform style/type. It features pliers with split ring for tethering for fall protection while working at height, high levera and more. In addition, it is made of steel. These pliers is designed for: #8 awg copper, aluminum, soft metal.
This radial cable stripper has a length of 5¼ inch, plus it weighs 1.5 ounce and is not insulated. It features controlled rotation, finger loop. In addition, it is made of steel, plastic, and is not tether ready. This radial cable stripper is designed for: cable preparation.
This radial cable stripper has a length of 5¼ inch, plus it weighs 1.5 ounce and is not insulated. It features controlled rotation, finger loop. In addition, it is made of steel, plastic, and is not tether ready. This radial cable stripper is designed for: cable preparation.
This all purpose pliers has a length of 8⅝ inch, plus it weighs 9.6 ounce and is not insulated. The handle has a standard style/type. It features dual material, grabbing and looping wire, induction hardened cutting knives, long nose. In addition, it is made of steel, steel and is not tether ready with a standard cushion grip. This all purpose pliers is designed for: cutting, stripping.
This all purpose pliers has a length of 8⅝ inch, plus it weighs 9.6 ounce and is not insulated. The handle has a standard style/type. It features dual material, grabbing and looping wire, induction hardened cutting knives, long nose. In addition, it is made of steel, steel and is not tether ready with a standard cushion grip. This all purpose pliers is designed for: cutting, stripping.
7-1/8 inch Klein-Kurve wire stripper/cutter. Serrated nose for strong gripping. Cuts, strips and loops 20-30 AWG Solid and 22-32 AWG Stranded wire. Coil spring provides fast self-opening action. Narrow nose for access to tight places.
7-1/8 inch Klein-Kurve wire stripper/cutter. Serrated nose for strong gripping. Cuts, strips and loops 20-30 AWG Solid and 22-32 AWG Stranded wire. Coil spring provides fast self-opening action. Narrow nose for access to tight places.
This skinning knife has a length of 2⅜ inch, plus it weighs 5.6 ounce and is insulated. The plastic handle is orange and has a cushion grip style/type. It features flame retardant, moulded dual layer insulation and meets the standards for 2012 Ed. CSA Z462-08, ASTM F1505-10, CAN/ULc-60900-09, IEC 60900:2012, NFPA-70E. In addition, it is made of steel and is tether ready. This skinning knife is designed for: cable scoring and cutting.
This skinning knife has a length of 2⅜ inch, plus it weighs 5.6 ounce and is insulated. The plastic handle is orange and has a cushion grip style/type. It features flame retardant, moulded dual layer insulation and meets the standards for 2012 Ed. CSA Z462-08, ASTM F1505-10, CAN/ULc-60900-09, IEC 60900:2012, NFPA-70E. In addition, it is made of steel and is tether ready. This skinning knife is designed for: cable scoring and cutting.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
