Threaded Stainless Steel Pipe Fittings

This 90-degree elbow has an FNPT fitting connection type and a Class 150 fitting schedule/class. Its maximum pressure is 300 and it is made of stainless steel. It has two holes and its pipe size is 3/4 inches.

This 90-degree elbow has an FNPT fitting connection type and a Class 150 fitting schedule/class. Its maximum pressure is 300 and it is made of stainless steel. It has two holes and its pipe size is 3/4 inches.

This ASTM/ANSI/ASME-certified, class 150, one-inch, 90-degree elbow has an FNPT connection type. It is used in air, natural gas, oil, potable water, and steam-based applications and is made of 304 stainless steel for good corrosion resistance. This product has a maximum operating pressure of 150 PSI with a temperature range of -30 Degrees F to 320 Degrees F.

This ASTM/ANSI/ASME-certified, class 150, one-inch, 90-degree elbow has an FNPT connection type. It is used in air, natural gas, oil, potable water, and steam-based applications and is made of 304 stainless steel for good corrosion resistance. This product has a maximum operating pressure of 150 PSI with a temperature range of -30 Degrees F to 320 Degrees F.

Maximum pressure 300 PSI, WOG at 150 Degrees F, 150 PSI Saturated Stem. Black fittings are interchangeable with black cast-iron or steel. NPI connections. For low pressure applications including air, water, natural gas and steam. Galvanized fittings resist rust and corrosion.

Maximum pressure 300 PSI, WOG at 150 Degrees F, 150 PSI Saturated Stem. Black fittings are interchangeable with black cast-iron or steel. NPI connections. For low pressure applications including air, water, natural gas and steam. Galvanized fittings resist rust and corrosion.

This ASME/ASTM/ANSI-certified, class 150, 1/2-inch, 90-degree elbow has an FNPT connection type. It is used in air, natural gas, oil, potable water, and steam-based applications and is made of 316 stainless steel for excellent corrosion resistance. This product has a maximum operating pressure of 150 PSI with a temperature range of -30 Degrees F to 320 Degrees F.

This ASME/ASTM/ANSI-certified, class 150, 1/2-inch, 90-degree elbow has an FNPT connection type. It is used in air, natural gas, oil, potable water, and steam-based applications and is made of 316 stainless steel for excellent corrosion resistance. This product has a maximum operating pressure of 150 PSI with a temperature range of -30 Degrees F to 320 Degrees F.

Use with standard wall (schedule 40) pipes and nipples: no welding is required. Bolt two flanges together with a gasket to form a tight seal that still allows easy access to the piping system. For use with air, water, oil, natural gas, or steam (except where noted). Max. pressure: 150 PSI @ 72 Degrees F: 150 PSI saturated steam.

Use with standard wall (schedule 40) pipes and nipples: no welding is required. Bolt two flanges together with a gasket to form a tight seal that still allows easy access to the piping system. For use with air, water, oil, natural gas, or steam (except where noted). Max. pressure: 150 PSI @ 72 Degrees F: 150 PSI saturated steam.

This straight pipe thread reducer changes the thread size of your pipe. Hose fitting A is male with a 1/4"-18 thread size and a NPTF connection type. Hose fitting B is female with a 1/8"-27 thread size and a NPTF connection type. This thread reducer has an overall length of 0.86 inches and conforms to SAE standards.

This straight pipe thread reducer changes the thread size of your pipe. Hose fitting A is male with a 1/4"-18 thread size and a NPTF connection type. Hose fitting B is female with a 1/8"-27 thread size and a NPTF connection type. This thread reducer has an overall length of 0.86 inches and conforms to SAE standards.

This ASTM/ANSI/ASME-certified, class 150, 3/4-inch, 90-degree elbow has an FNPT connection type. It is used in low-pressure applications and is made of 316 stainless steel for excellent corrosion resistance. This product has a maximum operating pressure of 150 PSI with a temperature range of -30 Degrees F to 320 Degrees F.

This ASTM/ANSI/ASME-certified, class 150, 3/4-inch, 90-degree elbow has an FNPT connection type. It is used in low-pressure applications and is made of 316 stainless steel for excellent corrosion resistance. This product has a maximum operating pressure of 150 PSI with a temperature range of -30 Degrees F to 320 Degrees F.

Maximum pressure 300 PSI, WOG at 150 Degrees F, 150 PSI Saturated Stem. Black fittings are interchangeable with black cast-iron or steel. NPI connections. For low pressure applications including air, water, natural gas and steam. Galvanized fittings resist rust and corrosion.

Maximum pressure 300 PSI, WOG at 150 Degrees F, 150 PSI Saturated Stem. Black fittings are interchangeable with black cast-iron or steel. NPI connections. For low pressure applications including air, water, natural gas and steam. Galvanized fittings resist rust and corrosion.

This ASTM/ANSI/ASME-certified, class 150, 1/2 x 3/8-inch reducing hex bushing has an MNPT x FNPT connection type. It is used in air, natural gas, and oil-based applications and is made of 316 stainless steel for excellent corrosion resistance. This product has a maximum operating pressure of 150 PSI with a temperature range of -30 Degrees F to 320 Degrees F.

This ASTM/ANSI/ASME-certified, class 150, 1/2 x 3/8-inch reducing hex bushing has an MNPT x FNPT connection type. It is used in air, natural gas, and oil-based applications and is made of 316 stainless steel for excellent corrosion resistance. This product has a maximum operating pressure of 150 PSI with a temperature range of -30 Degrees F to 320 Degrees F.

Maximum pressure 300 PSI, WOG at 150 Degrees F, 150 PSI Saturated Stem. Black fittings are interchangeable with black cast-iron or steel. NPI connections. For low pressure applications including air, water, natural gas and steam. Galvanized fittings resist rust and corrosion.

Maximum pressure 300 PSI, WOG at 150 Degrees F, 150 PSI Saturated Stem. Black fittings are interchangeable with black cast-iron or steel. NPI connections. For low pressure applications including air, water, natural gas and steam. Galvanized fittings resist rust and corrosion.

Change the thread size of your pipe with this straight pipe thread reducer. Hose fitting A is male with a 3/4"-14 thread size and a NPTF connection type. Hose fitting B is female with a 1/4"-14 thread size, and a NPTF connection type. This thread reducer has an overall length of 1.17 inches and conforms to SAE standards.

Change the thread size of your pipe with this straight pipe thread reducer. Hose fitting A is male with a 3/4"-14 thread size and a NPTF connection type. Hose fitting B is female with a 1/4"-14 thread size, and a NPTF connection type. This thread reducer has an overall length of 1.17 inches and conforms to SAE standards.

This ASTM/ANSI/ASME-certified, class 150, 1/4-inch straight coupling has an FNPT connection type. It is made of 304 stainless steel for good corrosion resistance. This product has a maximum operating pressure of 150 PSI with a temperature range of -30 Degrees F to 320 Degrees F.

This ASTM/ANSI/ASME-certified, class 150, 1/4-inch straight coupling has an FNPT connection type. It is made of 304 stainless steel for good corrosion resistance. This product has a maximum operating pressure of 150 PSI with a temperature range of -30 Degrees F to 320 Degrees F.

This plug is made of steel and is a counter sunk hex plug.

This plug is made of steel and is a counter sunk hex plug.

Change the thread size of your pipe with this straight pipe thread reducer. Hose fitting A is male with a 1/2"-14 thread size and a NPTF connection type. Hose fitting B is female with a 1/4"-18 thread size and a NPTF connection type. This thread reducer has an overall length of 1.11 inches and conforms to SAE standards.

Change the thread size of your pipe with this straight pipe thread reducer. Hose fitting A is male with a 1/2"-14 thread size and a NPTF connection type. Hose fitting B is female with a 1/4"-18 thread size and a NPTF connection type. This thread reducer has an overall length of 1.11 inches and conforms to SAE standards.

This ASTM/ANSI/ASME-certified, class 150, 3/8-inch cross has an FNPT connection type. It is made of 316 stainless steel for excellent corrosion resistance. This product has a maximum operating pressure of 150 PSI with a temperature range of -30 Degrees F to 320 Degrees F.

This ASTM/ANSI/ASME-certified, class 150, 3/8-inch cross has an FNPT connection type. It is made of 316 stainless steel for excellent corrosion resistance. This product has a maximum operating pressure of 150 PSI with a temperature range of -30 Degrees F to 320 Degrees F.

Maximum pressure 300 PSI, WOG at 150 Degrees F, 150 PSI Saturated Stem. Black fittings are interchangeable with black cast-iron or steel. NPI connections. For low pressure applications including air, water, natural gas and steam. Galvanized fittings resist rust and corrosion.

Maximum pressure 300 PSI, WOG at 150 Degrees F, 150 PSI Saturated Stem. Black fittings are interchangeable with black cast-iron or steel. NPI connections. For low pressure applications including air, water, natural gas and steam. Galvanized fittings resist rust and corrosion.