Steel Hydraulic Hose Adapters

Made for hoses with a hole dash size of eight, this hydraulic hose cap can withstand a maximum pressure of 4000 psi at a temperature of 70 Degrees F. Hose fitting A is female and has a M16 x 1.5 millimetre thread size, with a DIN 24 heavy connection type. Hose fitting B is male and has a 1 1/6"-12 thread size, with a JIC connection type. Each cap is made from carbon steel with a zinc coating and includes a Buna N O-ring.

Made for hoses with a hole dash size of eight, this hydraulic hose cap can withstand a maximum pressure of 4000 psi at a temperature of 70 Degrees F. Hose fitting A is female and has a M16 x 1.5 millimetre thread size, with a DIN 24 heavy connection type. Hose fitting B is male and has a 1 1/6"-12 thread size, with a JIC connection type. Each cap is made from carbon steel with a zinc coating and includes a Buna N O-ring.

This hydraulic adaptor is Male DIN Light x Male DIN Light and has a straight shape with a rigid movement fit. The DIN hose fitting A is M18 x 1.5 inches in diameter and the DIN hose fitting B is M14 x 1.5 inches in diameter with a size-12 hole dash. Made with zinc and carbon steel, the maximum PSI level is 2320 at 70 Degrees F on this SAE-approved adaptor.

This hydraulic adaptor is Male DIN Light x Male DIN Light and has a straight shape with a rigid movement fit. The DIN hose fitting A is M18 x 1.5 inches in diameter and the DIN hose fitting B is M14 x 1.5 inches in diameter with a size-12 hole dash. Made with zinc and carbon steel, the maximum PSI level is 2320 at 70 Degrees F on this SAE-approved adaptor.

This hydraulic adaptor is Male ORS x Male JIC and has a straight shape with a rigid movement fit. The ORS is 1/2"-14 thread size and the JIC is 1 5/8"-12 thread size with a size-810 hole dash. Made with zinc, Buna-N, and carbon steel, the maximum PSI level is 4000 at 70 Degrees F. SAE-approved and O-Ring included.

This hydraulic adaptor is Male ORS x Male JIC and has a straight shape with a rigid movement fit. The ORS is 1/2"-14 thread size and the JIC is 1 5/8"-12 thread size with a size-810 hole dash. Made with zinc, Buna-N, and carbon steel, the maximum PSI level is 4000 at 70 Degrees F. SAE-approved and O-Ring included.

This swivel connector is compatible with a pipe size of 1/2-inch, for use with a hose dash size eight, and has male by female threading. The threading on this connector comes in sizes 1 1/16"-12 by 1/2"-14, with ORB by NPSM connection types. This connector comes with a straight fitting shape, and is made of carbon steel that is zinc-plated. This swivel connector has a maximum working pressure of 3000 at 70 Degrees F, and includes O-rings.

This swivel connector is compatible with a pipe size of 1/2-inch, for use with a hose dash size eight, and has male by female threading. The threading on this connector comes in sizes 1 1/16"-12 by 1/2"-14, with ORB by NPSM connection types. This connector comes with a straight fitting shape, and is made of carbon steel that is zinc-plated. This swivel connector has a maximum working pressure of 3000 at 70 Degrees F, and includes O-rings.

This straight, swivel adapter is intended for hose dash size eight use, is compatible with pipe size 1/2-inch. This adapter has male by female threading, with NPT by NPSM connection types, in size 1/2"-14. This adapter is made of carbon steel and is zinc-plated, and has a maximum working pressure of 4000 at 70 Degrees F.

This straight, swivel adapter is intended for hose dash size eight use, is compatible with pipe size 1/2-inch. This adapter has male by female threading, with NPT by NPSM connection types, in size 1/2"-14. This adapter is made of carbon steel and is zinc-plated, and has a maximum working pressure of 4000 at 70 Degrees F.

Intended for use with a hole dash size of eight, this flange pipe adapter is compatible with a 1/2-inch pipe size, and has a flange size of 1/2-inch. With female threading, this straight, rigid adapter has a threading size of 1 3/16 inches by 1/2"-14 with a flange and NPT connection type.

Intended for use with a hole dash size of eight, this flange pipe adapter is compatible with a 1/2-inch pipe size, and has a flange size of 1/2-inch. With female threading, this straight, rigid adapter has a threading size of 1 3/16 inches by 1/2"-14 with a flange and NPT connection type.

Made from carbon steel and zinc plated, this rigid flange pipe kit comes with female threading with sizes 1 3/4" by 1"-11 1/2, with flange by NPT connection types. With a compatible pipe and flange size of one-inch, this straight shaped pipe kit is meant for use with a hole dash size of 16. This kit also comes with O-rings, and a maximum working pressure of 2000 at 70 Degrees F.

Made from carbon steel and zinc plated, this rigid flange pipe kit comes with female threading with sizes 1 3/4" by 1"-11 1/2, with flange by NPT connection types. With a compatible pipe and flange size of one-inch, this straight shaped pipe kit is meant for use with a hole dash size of 16. This kit also comes with O-rings, and a maximum working pressure of 2000 at 70 Degrees F.

This rigid 45-degree elbow hydraulic O-ring boss adapter is for use with hole dash size 4, has a maximum working pressure of 5000 at 70℉, and is made of zinc-plated carbon steel. Fitting A is male, connection type JIC, and measures 7/16"-20. Fitting B is male, connection type JIC, and measures 7/16"-20. The O-ring is included and is made of Buna N.

This rigid 45-degree elbow hydraulic O-ring boss adapter is for use with hole dash size 4, has a maximum working pressure of 5000 at 70℉, and is made of zinc-plated carbon steel. Fitting A is male, connection type JIC, and measures 7/16"-20. Fitting B is male, connection type JIC, and measures 7/16"-20. The O-ring is included and is made of Buna N.

This rigid 45 Degrees bulkhead elbow hydraulic adapter has a maximum working pressure of 4000 at 70 Degrees F and is for use with hole dash size 8. Fitting A is male, connection type JIC, and measures 3/4"-16. Fitting B is male, connection type JIC, and measures 3/4"-16. This adapter is zinc-plated and made from carbon steel. It is not crimpable and the O-ring is not included.

This rigid 45 Degrees bulkhead elbow hydraulic adapter has a maximum working pressure of 4000 at 70 Degrees F and is for use with hole dash size 8. Fitting A is male, connection type JIC, and measures 3/4"-16. Fitting B is male, connection type JIC, and measures 3/4"-16. This adapter is zinc-plated and made from carbon steel. It is not crimpable and the O-ring is not included.

This straight, rigid, and non-crimpable hexagonal pipe nipple is rated for a maximum working pressure of 3000 PSI at 70 Degrees F. Made for use with hole dash size 20 pipe, it connects male 1"-11 1/2 NPT hydraulic pipe to male 1"-11 1/2 NPT male hydraulic pipe. This pipe nipple is made of zinc-coated grey carbon steel. O-ring not included.

This straight, rigid, and non-crimpable hexagonal pipe nipple is rated for a maximum working pressure of 3000 PSI at 70 Degrees F. Made for use with hole dash size 20 pipe, it connects male 1"-11 1/2 NPT hydraulic pipe to male 1"-11 1/2 NPT male hydraulic pipe. This pipe nipple is made of zinc-coated grey carbon steel. O-ring not included.

Connect male 3/8"-18 NPT hydraulic pipe to male 3/4"-14 male hydraulic pipe with this straight, rigid, and non-crimpable hexagonal pipe nipple made of zinc-coated grey carbon steel. This pipe nipple is rated for a maximum working pressure of 2500 PSI at 70 Degrees F. Intended for use with hole dash size -32 pipe. O-ring not included.

Connect male 3/8"-18 NPT hydraulic pipe to male 3/4"-14 male hydraulic pipe with this straight, rigid, and non-crimpable hexagonal pipe nipple made of zinc-coated grey carbon steel. This pipe nipple is rated for a maximum working pressure of 2500 PSI at 70 Degrees F. Intended for use with hole dash size -32 pipe. O-ring not included.

Connect hole dash size -424 pipe at a 45-degree angle with this zinc-coated carbon steel hydraulic pipe street elbow. Connect male 1 1/2"-11 1/2 NPT pipe to female 1 1/2"-11 1/2 NPT pipe with this rigid, non-crimpable elbow. It is rated for a maximum working pressure of 3000 PSI at 70 Degrees F. Buna N O-ring included.

Connect hole dash size -424 pipe at a 45-degree angle with this zinc-coated carbon steel hydraulic pipe street elbow. Connect male 1 1/2"-11 1/2 NPT pipe to female 1 1/2"-11 1/2 NPT pipe with this rigid, non-crimpable elbow. It is rated for a maximum working pressure of 3000 PSI at 70 Degrees F. Buna N O-ring included.

Unite hydraulic hoses with this carbon steel union. This rigid, straight-fitting union is for use with a hole dash size of 1010. This union has a zinc finish and can withstand a maximum pressure of 5000 PSI and a temperature of 70 Degrees F. Hose fitting A and hose fitting B are both male and have a 5/8"-14 thread size, with a BSPP connection type.

Unite hydraulic hoses with this carbon steel union. This rigid, straight-fitting union is for use with a hole dash size of 1010. This union has a zinc finish and can withstand a maximum pressure of 5000 PSI and a temperature of 70 Degrees F. Hose fitting A and hose fitting B are both male and have a 5/8"-14 thread size, with a BSPP connection type.

Direct the flow of hydraulic fluids with this hydraulic adaptor. This adaptor is for use with hoses with a hole dash size of 10 and can withstand a maximum pressure of 4000 psi at a temperature of 70 Degrees F. Hose fitting A is female and has a M16 x 1.5 millimetre thread size, with a metric connection type. Hose fitting B is male and has a 3/4"-16 thread size, with a JIC connector type. This swivel, straight-fitting adaptor is made from carbon steel with a zinc finish.

Direct the flow of hydraulic fluids with this hydraulic adaptor. This adaptor is for use with hoses with a hole dash size of 10 and can withstand a maximum pressure of 4000 psi at a temperature of 70 Degrees F. Hose fitting A is female and has a M16 x 1.5 millimetre thread size, with a metric connection type. Hose fitting B is male and has a 3/4"-16 thread size, with a JIC connector type. This swivel, straight-fitting adaptor is made from carbon steel with a zinc finish.

This hydraulic adaptor is Male DIN Light x Male DIN Light and has a straight shape with a rigid movement fit. This adaptor is SAE-approved and made with zinc and carbon steel. The DIN hose fitting A is M45 x 2 inches in diameter and the DIN hose fitting B is M30 x 1.5 inches in diameter with a size-35 hole dash.

This hydraulic adaptor is Male DIN Light x Male DIN Light and has a straight shape with a rigid movement fit. This adaptor is SAE-approved and made with zinc and carbon steel. The DIN hose fitting A is M45 x 2 inches in diameter and the DIN hose fitting B is M30 x 1.5 inches in diameter with a size-35 hole dash.

This hydraulic adaptor is Male DIN Heavy x Male DIN Heavy and has a straight shape with a rigid movement fit. The DIN hose fitting A is M20 x 1.5 inches in diameter and the DIN hose fitting B is M14 x 1.5 inches in diameter with a size-12 hole dash. Made with zinc and carbon steel, the maximum PSI level is 5800 at 70 Degrees F on this SAE-approved adaptor.

This hydraulic adaptor is Male DIN Heavy x Male DIN Heavy and has a straight shape with a rigid movement fit. The DIN hose fitting A is M20 x 1.5 inches in diameter and the DIN hose fitting B is M14 x 1.5 inches in diameter with a size-12 hole dash. Made with zinc and carbon steel, the maximum PSI level is 5800 at 70 Degrees F on this SAE-approved adaptor.