Specialty Use Pliers

This mig welding pliers has a length of 8 inch. It features induction hardened cutting edge, multiple jaws. This mig welding pliers is designed for: welding.

This mig welding pliers has a length of 8 inch. It features induction hardened cutting edge, multiple jaws. This mig welding pliers is designed for: welding.

This tire chain repair pliers has a length of 32½ inches and is not insulated. The handle is red and has a standard style/type. In addition, it is not non-sparking, and is not tether ready with a thermoplastic rubber standard cushion grip.

This tire chain repair pliers has a length of 32½ inches and is not insulated. The handle is red and has a standard style/type. In addition, it is not non-sparking, and is not tether ready with a thermoplastic rubber standard cushion grip.

This safety wire-twisting pliers has a length of 10½ inch. It meets the standards for ASME B107.500. In addition, it has a black oxide finish, and is not tether ready with a plain grip. This safety wire-twisting pliers is designed for: agriculture, camping, construction, fencing, metal working.

This safety wire-twisting pliers has a length of 10½ inch. It meets the standards for ASME B107.500. In addition, it has a black oxide finish, and is not tether ready with a plain grip. This safety wire-twisting pliers is designed for: agriculture, camping, construction, fencing, metal working.

This Code Blue series welding pliers has a length of 9 inch, plus it weighs 0.7 pounds and is not insulated. The handle is multicoloured with an ergonomic style/type. It meets the standards for ASME B107. In addition, it is not tether ready with a plastic standard cushion grip. This welding pliers is designed for: welding, wire cutter.

This Code Blue series welding pliers has a length of 9 inch, plus it weighs 0.7 pounds and is not insulated. The handle is multicoloured with an ergonomic style/type. It meets the standards for ASME B107. In addition, it is not tether ready with a plastic standard cushion grip. This welding pliers is designed for: welding, wire cutter.

This hose clamp pliers has a length of 8¾ inch, plus it weighs 363 g and is not insulated. The handle is red and has a standard style/type. It features clamping jaw, forged, oil-hardened. In addition, it is non-sparking, and is not tether ready with a standard cushion grip.

This hose clamp pliers has a length of 8¾ inch, plus it weighs 363 g and is not insulated. The handle is red and has a standard style/type. It features clamping jaw, forged, oil-hardened. In addition, it is non-sparking, and is not tether ready with a standard cushion grip.

Hose pinch-off pliers eliminate the need to drain cooling system when servicing. Pliers squeeze hoses shut and jaws swivel for parallel clamping. Pliers include automatic locking ratchet. Tool can be used to pinch off some emission system hoses. Do not use on wire-reinforced hose.

Hose pinch-off pliers eliminate the need to drain cooling system when servicing. Pliers squeeze hoses shut and jaws swivel for parallel clamping. Pliers include automatic locking ratchet. Tool can be used to pinch off some emission system hoses. Do not use on wire-reinforced hose.

This hose pinch pliers has a length of 9 inches and is not insulated. The handle is green. It features automatically locks. In addition, it is not non-sparking, and is not tether ready with a standard cushion grip.

This hose pinch pliers has a length of 9 inches and is not insulated. The handle is green. It features automatically locks. In addition, it is not non-sparking, and is not tether ready with a standard cushion grip.

This fuse puller pliers has a length of 5 inch, plus it weighs 0.248 pounds and is not insulated. The handle is yellow and has a dipped style/type. It features install and extract heat coils. In addition, it is not non-sparking, and is not tether ready with a plastic standard cushion grip. This fuse puller pliers is designed for: installing and extracting fuses from line amplifiers and other cylindrical shaped components and more.

This fuse puller pliers has a length of 5 inch, plus it weighs 0.248 pounds and is not insulated. The handle is yellow and has a dipped style/type. It features install and extract heat coils. In addition, it is not non-sparking, and is not tether ready with a plastic standard cushion grip. This fuse puller pliers is designed for: installing and extracting fuses from line amplifiers and other cylindrical shaped components and more.

This fencing pliers has a length of 10⅝ inch, plus it weighs 1.48 pounds and is not insulated. The handle is red and has a standard style/type. It features multipurpose tool, rust-resistant and meets the standards for ASME. In addition, it is not non-sparking, and is not tether ready with a standard cushion grip.

This fencing pliers has a length of 10⅝ inch, plus it weighs 1.48 pounds and is not insulated. The handle is red and has a standard style/type. It features multipurpose tool, rust-resistant and meets the standards for ASME. In addition, it is not non-sparking, and is not tether ready with a standard cushion grip.

This wire-twisting pliers has a length of 12 inch, plus it weighs.80lb. It features twists ties in a single pull. In addition, it has a chrome-plated finish, with a rubber grip. This wire-twisting pliers is designed for: twists wire bar ties.

This wire-twisting pliers has a length of 12 inch, plus it weighs.80lb. It features twists ties in a single pull. In addition, it has a chrome-plated finish, with a rubber grip. This wire-twisting pliers is designed for: twists wire bar ties.

This safety wire-twisting pliers has a length of 11¼ inch. It meets the standards for ASME B107.500. In addition, it has a black oxide finish, and is not tether ready with a plain grip. This safety wire-twisting pliers is designed for: agriculture, camping, construction, fencing, metal working.

This safety wire-twisting pliers has a length of 11¼ inch. It meets the standards for ASME B107.500. In addition, it has a black oxide finish, and is not tether ready with a plain grip. This safety wire-twisting pliers is designed for: agriculture, camping, construction, fencing, metal working.

This fencing pliers has a length of 10¼ inches and is not insulated. The handle is blue and has a standard style/type. It meets the standards for ASME B107.500. In addition, it is not non-sparking, and is not tether ready with a standard cushion grip.

This fencing pliers has a length of 10¼ inches and is not insulated. The handle is blue and has a standard style/type. It meets the standards for ASME B107.500. In addition, it is not non-sparking, and is not tether ready with a standard cushion grip.

This push pin pliers has a length of 7½ inch, plus it weighs 0.45 pounds and is not insulated. The handle is black and has a standard style/type. It features pulls anchor in one step and meets the standards for ASME. In addition, it has a black oxide finish, plus it is not non-sparking, and is not tether ready with a deluxe cushion grip. This push pin pliers is designed for: remove plastic anchors, remove push pins.

This push pin pliers has a length of 7½ inch, plus it weighs 0.45 pounds and is not insulated. The handle is black and has a standard style/type. It features pulls anchor in one step and meets the standards for ASME. In addition, it has a black oxide finish, plus it is not non-sparking, and is not tether ready with a deluxe cushion grip. This push pin pliers is designed for: remove plastic anchors, remove push pins.

This fencing pliers has a length of 10¼ inches and is not insulated. The handle is multicoloured and has a standard style/type. It meets the standards for ANSI. In addition, it is not non-sparking, and is not tether ready with a standard cushion grip.

This fencing pliers has a length of 10¼ inches and is not insulated. The handle is multicoloured and has a standard style/type. It meets the standards for ANSI. In addition, it is not non-sparking, and is not tether ready with a standard cushion grip.

Spring tension, self-opening tool for punching round holes in leather, plastic, rubber, canvas, & similar materials. Made of plated steel with 6 tapered and hollow, hardened steel punches. Punch sizes: 5/64 inch, 3/32 inch, 7/64 inch, 1/8 inch, 5/32 inch, 3/1 inch (2.0, 2.5, 3.0, 3.5, 4.0, 4.5 mm).

Spring tension, self-opening tool for punching round holes in leather, plastic, rubber, canvas, & similar materials. Made of plated steel with 6 tapered and hollow, hardened steel punches. Punch sizes: 5/64 inch, 3/32 inch, 7/64 inch, 1/8 inch, 5/32 inch, 3/1 inch (2.0, 2.5, 3.0, 3.5, 4.0, 4.5 mm).

This hose clamp pliers has a length of 8¾ inch, plus it weighs 345 g and is not insulated. The handle is red and has a standard style/type. It features clamping jaw. In addition, it is non-sparking, and is not tether ready with a standard cushion grip.

This hose clamp pliers has a length of 8¾ inch, plus it weighs 345 g and is not insulated. The handle is red and has a standard style/type. It features clamping jaw. In addition, it is non-sparking, and is not tether ready with a standard cushion grip.