Insulated tools have a nonconductive coating or cover to reduce the risk of electrical arcing and protect against electrical shock from accidental contact with live circuits.
Product ITEM is unavailable. See products from the same category below.
Slotted Screwdrivers
Slotted screwdrivers, also known as a flat head or flat blade screwdrivers, have a flat blade tip at the end of the shaft that is inserted into the single horizontal groove (the slot) in the fastener head and the handle is turned to rotate the screw. They can come in two blade profiles: keystone and cabinet. Keystone-style screwdrivers have a slightly flared blade profile that tapers off at the end and provides extra stiffness so the screwdriver can withstand more torque. Cabinet-style screwdrivers do not have a flared blade profile so they can access screws in tight spaces and for detail use such as installing cabinetry hardware. Slotted screwdrivers can be used as tools for prying, poking holes, and other non-fastener driving applications.
This screwdriver has a length of 12¾ inches and is not insulated. The acetate handle is 4 11/16 inch long, is black/red. In addition, it has a SAE measurement type, is corrosion-resistant, has a chrome finish, plus it is not non-sparking, is non-magnetic, and is tether ready with a cushion grip.
This screwdriver has a length of 12¾ inches and is not insulated. The acetate handle is 4 11/16 inch long, is black/red. In addition, it has a SAE measurement type, is corrosion-resistant, has a chrome finish, plus it is not non-sparking, is non-magnetic, and is tether ready with a cushion grip.
This screwdriver has a length of 11¾ inches and is not insulated. The acetate handle is 3 11/16 inch long, is black/red. In addition, it has a SAE measurement type, is corrosion-resistant, has a chrome finish, plus it is not non-sparking, is non-magnetic, and is tether ready with a cushion grip.
This screwdriver has a length of 11¾ inches and is not insulated. The acetate handle is 3 11/16 inch long, is black/red. In addition, it has a SAE measurement type, is corrosion-resistant, has a chrome finish, plus it is not non-sparking, is non-magnetic, and is tether ready with a cushion grip.
This screwdriver has a length of 10 inches and is not insulated. The acetate handle is 3 11/16 inch long, is black/red. In addition, it has a SAE measurement type, is corrosion-resistant, has a chrome finish, plus it is not non-sparking, is non-magnetic, and is tether ready with a cushion grip.
This screwdriver has a length of 10 inches and is not insulated. The acetate handle is 3 11/16 inch long, is black/red. In addition, it has a SAE measurement type, is corrosion-resistant, has a chrome finish, plus it is not non-sparking, is non-magnetic, and is tether ready with a cushion grip.
This screwdriver has a length of 6½ inches and is not insulated. The acetate handle is 3 11/16 inch long, is black/red. In addition, it has a SAE measurement type, is corrosion-resistant, has a chrome finish, plus it is not non-sparking, is non-magnetic, and is tether ready with a cushion grip.
This screwdriver has a length of 6½ inches and is not insulated. The acetate handle is 3 11/16 inch long, is black/red. In addition, it has a SAE measurement type, is corrosion-resistant, has a chrome finish, plus it is not non-sparking, is non-magnetic, and is tether ready with a cushion grip.
This screwdriver has a length of 13 inches and is not insulated. The acetate handle is five inches long, is black/red. In addition, it has a SAE measurement type, is corrosion-resistant, has a chrome finish, plus it is not non-sparking, is non-magnetic, and is tether ready with a cushion grip.
This screwdriver has a length of 13 inches and is not insulated. The acetate handle is five inches long, is black/red. In addition, it has a SAE measurement type, is corrosion-resistant, has a chrome finish, plus it is not non-sparking, is non-magnetic, and is tether ready with a cushion grip.
This insulated slotted screwdriver has a 1/4-inch tip and a six-inch slim drive shank. This screwdriver has a rubber handle, is 10 inches long overall, and meets UL Classified, ASTM F 1505-10, IEC 60900:2004, NFPA 70 E, 2012 Ed standards.
This insulated slotted screwdriver has a 1/4-inch tip and a six-inch slim drive shank. This screwdriver has a rubber handle, is 10 inches long overall, and meets UL Classified, ASTM F 1505-10, IEC 60900:2004, NFPA 70 E, 2012 Ed standards.
This screwdriver has a length of 8¼ inches and is not insulated. The acetate handle is 4¼ inch long, is black/red. In addition, it has a SAE measurement type, is corrosion-resistant, has a chrome finish, plus it is not non-sparking, is non-magnetic, and is tether ready with a cushion grip.
This screwdriver has a length of 8¼ inches and is not insulated. The acetate handle is 4¼ inch long, is black/red. In addition, it has a SAE measurement type, is corrosion-resistant, has a chrome finish, plus it is not non-sparking, is non-magnetic, and is tether ready with a cushion grip.
This insulated slotted screwdriver has a 3/8-inch tip and a 10-inch slim drive shank. This screwdriver has a rubber handle, is 14 inches long overall, and meets UL Classified, ASTM F 1505-10, IEC 60900:2004, NFPA 70 E, 2012 Ed standards.
This insulated slotted screwdriver has a 3/8-inch tip and a 10-inch slim drive shank. This screwdriver has a rubber handle, is 14 inches long overall, and meets UL Classified, ASTM F 1505-10, IEC 60900:2004, NFPA 70 E, 2012 Ed standards.
This insulated screwdriver has a 3/16-inch cabinet tip and a three-inch slim drive shank. This screwdriver has a rubber handle, is seven inches long overall, and meets UL Classified, ASTM F 1505-10, IEC 60900:2004, NFPA 70 E, 2012 Ed standards.
This insulated screwdriver has a 3/16-inch cabinet tip and a three-inch slim drive shank. This screwdriver has a rubber handle, is seven inches long overall, and meets UL Classified, ASTM F 1505-10, IEC 60900:2004, NFPA 70 E, 2012 Ed standards.
This insulated slotted screwdriver has a 5/16-inch tip and a seven-inch slim drive shank. This screwdriver has a rubber handle, is 11 inches long overall, and meets UL Classified, ASTM F 1505-10, IEC 60900:2004, NFPA 70 E, 2012 Ed standards.
This insulated slotted screwdriver has a 5/16-inch tip and a seven-inch slim drive shank. This screwdriver has a rubber handle, is 11 inches long overall, and meets UL Classified, ASTM F 1505-10, IEC 60900:2004, NFPA 70 E, 2012 Ed standards.
This insulated screwdriver has a 3/16-inch cabinet tip and an eight-inch slim drive shank. This screwdriver has a rubber handle, is 12 inches long overall, and meets UL Classified, ASTM F 1505-10, IEC 60900:2004, NFPA 70 E, 2012 Ed standards.
This insulated screwdriver has a 3/16-inch cabinet tip and an eight-inch slim drive shank. This screwdriver has a rubber handle, is 12 inches long overall, and meets UL Classified, ASTM F 1505-10, IEC 60900:2004, NFPA 70 E, 2012 Ed standards.
This screwdriver has a length of 11 inches and is not insulated. The acetate handle is five inches long, is black/red. In addition, it has a SAE measurement type, is corrosion-resistant, has a chrome finish, plus it is not non-sparking, is non-magnetic, and is tether ready with a cushion grip.
This screwdriver has a length of 11 inches and is not insulated. The acetate handle is five inches long, is black/red. In addition, it has a SAE measurement type, is corrosion-resistant, has a chrome finish, plus it is not non-sparking, is non-magnetic, and is tether ready with a cushion grip.
This screwdriver has a length of 14¼ inches and is not insulated. The acetate handle is 4¼ inch long, is black/red. In addition, it has a SAE measurement type, is corrosion-resistant, has a chrome finish, plus it is not non-sparking, is non-magnetic, and is tether ready with a cushion grip.
This screwdriver has a length of 14¼ inches and is not insulated. The acetate handle is 4¼ inch long, is black/red. In addition, it has a SAE measurement type, is corrosion-resistant, has a chrome finish, plus it is not non-sparking, is non-magnetic, and is tether ready with a cushion grip.
This screwdriver has a length of 10¾ inches and is not insulated. The acetate handle is 4 11/16 inch long, is black/red. In addition, it has a SAE measurement type, is corrosion-resistant, has a chrome finish, plus it is not non-sparking, is non-magnetic, and is tether ready with a cushion grip.
This screwdriver has a length of 10¾ inches and is not insulated. The acetate handle is 4 11/16 inch long, is black/red. In addition, it has a SAE measurement type, is corrosion-resistant, has a chrome finish, plus it is not non-sparking, is non-magnetic, and is tether ready with a cushion grip.
This insulated screwdriver has a 3/16-inch cabinet tip and a six-inch slim drive shank. This screwdriver has a rubber handle, is 10 inches long overall, and meets UL Classified, ASTM F 1505-10, IEC 60900:2004, NFPA 70 E, 2012 Ed standards.
This insulated screwdriver has a 3/16-inch cabinet tip and a six-inch slim drive shank. This screwdriver has a rubber handle, is 10 inches long overall, and meets UL Classified, ASTM F 1505-10, IEC 60900:2004, NFPA 70 E, 2012 Ed standards.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
