Product ITEM is unavailable. See products from the same category below.
RTV Gasket Makers
RTV (room temperature vulcanizing) gasket makers have better gap-filling properties than anaerobic gasket makers which makes them more suited for assemblies that have wider gaps with surfaces that are not precision machined. They cure when exposed to air at room temperature, where anaerobic gasket makers cure in the absence of air. The liquid form of these gasket makers replaces the need for a precut material gasket by filling the space between two mating surfaces. Also called formed-in-place (FIP) gaskets, they seep into pits and scratches to provide a clean surface and create any shape needed. RTV gasket makers are lighter weight and thicker than cork, paper, or rubber gaskets.
This gasket maker is a single component, room temperature vulcanizing sealant for high-temperature applications and heavy-duty use. The red, non-sag, silicone paste has a continuous operating temperature range of -54 to 316 Degrees C and a flashpoint of greater than 93 Degrees C. This non-flammable, non-toxic sealant begins to harden in one hour and cures fully in 24 hours. This product comes in an 80-millilitre tube.
This gasket maker is a single component, room temperature vulcanizing sealant for high-temperature applications and heavy-duty use. The red, non-sag, silicone paste has a continuous operating temperature range of -54 to 316 Degrees C and a flashpoint of greater than 93 Degrees C. This non-flammable, non-toxic sealant begins to harden in one hour and cures fully in 24 hours. This product comes in an 80-millilitre tube.
This gasket maker is a single component, room temperature vulcanizing sealant designed for heavy-duty oil applications. The black, thixotropic, silicone paste dries tack-free in two hours and fully cures in 24 hours. This non-corrosive, low odour sealant has a temperature range of -54 to 260 Degrees C. It is sensor safe and has a flashpoint of greater than 93 Degrees C. This non-flammable, non-toxic product comes in a 300-millilitre cartridge.
This gasket maker is a single component, room temperature vulcanizing sealant designed for heavy-duty oil applications. The black, thixotropic, silicone paste dries tack-free in two hours and fully cures in 24 hours. This non-corrosive, low odour sealant has a temperature range of -54 to 260 Degrees C. It is sensor safe and has a flashpoint of greater than 93 Degrees C. This non-flammable, non-toxic product comes in a 300-millilitre cartridge.
This single-component, room temperature vulcanizing, elastomeric sealant makes leak-proof gaskets immediately. The black, thixotropic, non-slumping paste can withstand a continuous temperature range of -59 to 232 Degrees C and has a flashpoint of greater than 93 Degrees C. This sensor-safe, non-corrosive sealant begins to harden in five minutes and fully cures in 24 hours. This product comes in a 300-millilitre cartridge.
This single-component, room temperature vulcanizing, elastomeric sealant makes leak-proof gaskets immediately. The black, thixotropic, non-slumping paste can withstand a continuous temperature range of -59 to 232 Degrees C and has a flashpoint of greater than 93 Degrees C. This sensor-safe, non-corrosive sealant begins to harden in five minutes and fully cures in 24 hours. This product comes in a 300-millilitre cartridge.
This gasket maker is a single component, room temperature vulcanizing sealant designed for high-torque and high vibration applications. The blue, non-sag, silicone paste dries tack-free in two hours and fully cures in 24 hours. This non-corrosive, low odour sealant has a temperature range of -54 to 260 Degrees C. It is sensor safe and has a flashpoint of greater than 95 Degrees C. This non-flammable, non-toxic product comes in a 300-millilitre cartridge.
This gasket maker is a single component, room temperature vulcanizing sealant designed for high-torque and high vibration applications. The blue, non-sag, silicone paste dries tack-free in two hours and fully cures in 24 hours. This non-corrosive, low odour sealant has a temperature range of -54 to 260 Degrees C. It is sensor safe and has a flashpoint of greater than 95 Degrees C. This non-flammable, non-toxic product comes in a 300-millilitre cartridge.
Ultra Black(R) OEM high temperature silicone gasket maker. Sensor-safe, low odour, non-corrosive. Temperature range -54 deg C to 250 deg C intermittent: resists auto and shop fluids and vibration. Retains high flexibility and oil resistance properties through use of a patented adhesion system.
Ultra Black(R) OEM high temperature silicone gasket maker. Sensor-safe, low odour, non-corrosive. Temperature range -54 deg C to 250 deg C intermittent: resists auto and shop fluids and vibration. Retains high flexibility and oil resistance properties through use of a patented adhesion system.
This slow-drying, non-hardening gasket sealant seals flanges, fittings, connections, and flexible assemblies against leaks. The black, viscous paste can withstand a continuous temperature range of -54 to 204 Degrees C. Made up of modified resin, fillers, and alcohol, this sealant fully cures in 24 hours. This product comes in an 80-millilitre tube.
This slow-drying, non-hardening gasket sealant seals flanges, fittings, connections, and flexible assemblies against leaks. The black, viscous paste can withstand a continuous temperature range of -54 to 204 Degrees C. Made up of modified resin, fillers, and alcohol, this sealant fully cures in 24 hours. This product comes in an 80-millilitre tube.
The Right Stuff(R) gasket maker. Heavy-bodied, black, elastometric rubber gasket. Superior flexibility and adhesion. Noncorrosive. Low odor. Low volatility. Used in OE assembly lines. Temperature range of -59 degrees C to 232 degrees C. Excellent oil and transmission fluid resistance.
The Right Stuff(R) gasket maker. Heavy-bodied, black, elastometric rubber gasket. Superior flexibility and adhesion. Noncorrosive. Low odor. Low volatility. Used in OE assembly lines. Temperature range of -59 degrees C to 232 degrees C. Excellent oil and transmission fluid resistance.
This single component, room temperature vulcanizing, elastomeric sealant makes leak-proof gaskets immediately. The black, thixotropic, non-slumping paste can withstand a continuous temperature range of -59 to 232 Degrees C and has a flashpoint of greater than 95 Degrees C. This sensor-safe, non-corrosive sealant begins to harden in five minutes and fully cures in 24 hours. This product comes in a 7.5-ounce pressurized can.
This single component, room temperature vulcanizing, elastomeric sealant makes leak-proof gaskets immediately. The black, thixotropic, non-slumping paste can withstand a continuous temperature range of -59 to 232 Degrees C and has a flashpoint of greater than 95 Degrees C. This sensor-safe, non-corrosive sealant begins to harden in five minutes and fully cures in 24 hours. This product comes in a 7.5-ounce pressurized can.
This SI 587 gasket maker is blue and comes in a 10.14 fluid ounce cartridge. It meets the standards for California Proposition 65, CEPA DSL/NDSL, CERCLA/SARA Section 302 EHS, CERCLA/SARA Section 311/312, CERCLA/SARA Section 313, OSHA 29 CFR 1910.1200, TSCA. This gasket maker has a working time of 10 minutes.
This SI 587 gasket maker is blue and comes in a 10.14 fluid ounce cartridge. It meets the standards for California Proposition 65, CEPA DSL/NDSL, CERCLA/SARA Section 302 EHS, CERCLA/SARA Section 311/312, CERCLA/SARA Section 313, OSHA 29 CFR 1910.1200, TSCA. This gasket maker has a working time of 10 minutes.
This SI 587 gasket maker is blue and comes in a 2.37 fluid ounce tube. It meets the standards for California Proposition 65, CEPA DSL/NDSL, CERCLA/SARA Section 302 EHS, CERCLA/SARA Section 311/312, CERCLA/SARA Section 313, OSHA 29 CFR 1910.1200, TSCA. This gasket maker has a working time of 10 minutes.
This SI 587 gasket maker is blue and comes in a 2.37 fluid ounce tube. It meets the standards for California Proposition 65, CEPA DSL/NDSL, CERCLA/SARA Section 302 EHS, CERCLA/SARA Section 311/312, CERCLA/SARA Section 313, OSHA 29 CFR 1910.1200, TSCA. This gasket maker has a working time of 10 minutes.
This SI 598 gasket maker is black and comes in a 2.37 fluid ounce tube. It meets the standards for California Proposition 65, CEPA DSL/NDSL, CERCLA/SARA Section 302 EHS, CERCLA/SARA Section 311/312, CERCLA/SARA Section 313, OSHA 29 CFR 1910.1200, TSCA. This gasket maker has a working time of 30 minutes.
This SI 598 gasket maker is black and comes in a 2.37 fluid ounce tube. It meets the standards for California Proposition 65, CEPA DSL/NDSL, CERCLA/SARA Section 302 EHS, CERCLA/SARA Section 311/312, CERCLA/SARA Section 313, OSHA 29 CFR 1910.1200, TSCA. This gasket maker has a working time of 30 minutes.
This gasket maker is a single component, room temperature vulcanizing sealant. The blue, thixotropic, silicone paste has an intermittent temperature range of -54 to 260 Degrees C and a flashpoint of greater than 93 Degrees C. This sensor-safe sealant begins to harden in one hour and fully cures in 24 hours. This non-flammable, non-toxic product comes in an 80-millilitre tube.
This gasket maker is a single component, room temperature vulcanizing sealant. The blue, thixotropic, silicone paste has an intermittent temperature range of -54 to 260 Degrees C and a flashpoint of greater than 93 Degrees C. This sensor-safe sealant begins to harden in one hour and fully cures in 24 hours. This non-flammable, non-toxic product comes in an 80-millilitre tube.
This sensor-safe, room temperature vulcanizing gasket maker is designed for high torque applications. The non-corrosive, grey paste can withstand a temperature range of -59 to 329 Degrees C and has a flashpoint of greater than 93 Degrees C. The low odour sealant begins to harden in 30 minutes and fully cures in 24 hours. This product comes in an 80-millilitre tube.
This sensor-safe, room temperature vulcanizing gasket maker is designed for high torque applications. The non-corrosive, grey paste can withstand a temperature range of -59 to 329 Degrees C and has a flashpoint of greater than 93 Degrees C. The low odour sealant begins to harden in 30 minutes and fully cures in 24 hours. This product comes in an 80-millilitre tube.
These RTV gasket makers replace the need for a precut gasket by filling the space between two mating surfaces. They cure in place and are useful for general purpose applications.
These RTV gasket makers replace the need for a precut gasket by filling the space between two mating surfaces. They cure in place and are useful for general purpose applications.
This gasket maker is a single component, room temperature vulcanizing sealant designed for high-torque and high vibration applications. The grey, non-sag, silicone paste dries tack-free in one hour and fully cures in 24 hours. This non-corrosive, low odour sealant has a temperature range of -54 to 260 Degrees C. It is sensor safe and has a flashpoint of greater than 93 Degrees C. This product comes in an 80-millilitre tube.
This gasket maker is a single component, room temperature vulcanizing sealant designed for high-torque and high vibration applications. The grey, non-sag, silicone paste dries tack-free in one hour and fully cures in 24 hours. This non-corrosive, low odour sealant has a temperature range of -54 to 260 Degrees C. It is sensor safe and has a flashpoint of greater than 93 Degrees C. This product comes in an 80-millilitre tube.
This SI 5699 gasket maker is grey and comes in a 2.37 fluid ounce tube. It meets the standards for California Proposition 65CEPA DSL/NDSL, CERCLA/SARA Section 302 EHS, CERCLA/SARA Section 311/312, CERCLA/SARA Section 313, OSHA 29 CFR 1910.1200, TSCA. This gasket maker has a working time of 30 minutes.
This SI 5699 gasket maker is grey and comes in a 2.37 fluid ounce tube. It meets the standards for California Proposition 65CEPA DSL/NDSL, CERCLA/SARA Section 302 EHS, CERCLA/SARA Section 311/312, CERCLA/SARA Section 313, OSHA 29 CFR 1910.1200, TSCA. This gasket maker has a working time of 30 minutes.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
