Product ITEM is unavailable. See products from the same category below.
Ring Terminals
Ring terminals fasten around bolts or threaded connection posts to create semipermanent connections between wires and circuit points. Also known as ring connectors, they connect power or ground wires to post-type connections in high-vibration applications, such as automobiles, airplanes, and industrial equipment. They have a barrel-shaped body where the stripped conductors fit into. Conductors are either crimped or soldered in the barrel and have a round, tongue-style terminal that's flat and has mounting holes for fastening to connection points.
These ring terminals are designed for a 12- to 10-gauge wire and fit a 1/2-inch stud. They have a yellow flared vinyl insulation and a tin-plated copper crimp connection with a butted seam. These 600-volt ring terminals are 4 13/32 inches long and can withstand temperatures up to 75 Degrees C. They meet CSA standards and come in a pack of 50.
These ring terminals are designed for a 12- to 10-gauge wire and fit a 1/2-inch stud. They have a yellow flared vinyl insulation and a tin-plated copper crimp connection with a butted seam. These 600-volt ring terminals are 4 13/32 inches long and can withstand temperatures up to 75 Degrees C. They meet CSA standards and come in a pack of 50.
These ring connectors are designed for a 12- to 10-gauge wire and fit a 1/4-inch stud. These 600-volt connectors are 4 13/32 inches long and can withstand temperatures up to 105 Degrees C. They have heat-shrink tubing insulation and a copper alloy 110 connection with a brazed seam. These connectors come in a pack of 25.
These ring connectors are designed for a 12- to 10-gauge wire and fit a 1/4-inch stud. These 600-volt connectors are 4 13/32 inches long and can withstand temperatures up to 105 Degrees C. They have heat-shrink tubing insulation and a copper alloy 110 connection with a brazed seam. These connectors come in a pack of 25.
These non-insulated ring connectors are designed for a 16- to 14-gauge wire and fit a 1/4-inch stud. These 600-volt connectors are 4 13/32 inches long and can withstand temperatures up to 75 Degrees C. They have a copper alloy 110 connection with a butted seam. These connectors meet CSA standards and come in a pack of 100.
These non-insulated ring connectors are designed for a 16- to 14-gauge wire and fit a 1/4-inch stud. These 600-volt connectors are 4 13/32 inches long and can withstand temperatures up to 75 Degrees C. They have a copper alloy 110 connection with a butted seam. These connectors meet CSA standards and come in a pack of 100.
These ring terminals are designed for a 22- to 18-gauge wire and fit a number eight stud. They have a red flared vinyl insulation and a copper alloy 110 connection with a butted seam. These 600-volt ring terminals are 4 13/32 inches long and can withstand temperatures up to 75 Degrees C. They meet CSA standards and come in a pack of 100.
These ring terminals are designed for a 22- to 18-gauge wire and fit a number eight stud. They have a red flared vinyl insulation and a copper alloy 110 connection with a butted seam. These 600-volt ring terminals are 4 13/32 inches long and can withstand temperatures up to 75 Degrees C. They meet CSA standards and come in a pack of 100.
These non-insulated ring connectors are designed for a 16- to 14-gauge wire and fit a number 10 stud. These 600-volt connectors are 4 1/64 inches long and can withstand temperatures up to 75 Degrees C. They have a copper alloy 110 connection with a butted seam. These connectors meet CSA standards and come in a pack of 100.
These non-insulated ring connectors are designed for a 16- to 14-gauge wire and fit a number 10 stud. These 600-volt connectors are 4 1/64 inches long and can withstand temperatures up to 75 Degrees C. They have a copper alloy 110 connection with a butted seam. These connectors meet CSA standards and come in a pack of 100.
These non-insulated ring connectors are designed for a 12- to 10-gauge wire and fit a number eight stud. These 600-volt connectors are 4 1/64 inches long and can withstand temperatures up to 75 Degrees C. They have a copper alloy 110 connection with a butted seam. These connectors meet CSA standards and come in a pack of 100.
These non-insulated ring connectors are designed for a 12- to 10-gauge wire and fit a number eight stud. These 600-volt connectors are 4 1/64 inches long and can withstand temperatures up to 75 Degrees C. They have a copper alloy 110 connection with a butted seam. These connectors meet CSA standards and come in a pack of 100.
This non-insulated ring connector is designed for a 22- to 18-gauge wire and fits a number eight stud. This 600-volt connector can withstand temperatures up to 75 Degrees C. It has a crimp tin-plated copper connection with a butted seam. This connector meets CSA standards.
This non-insulated ring connector is designed for a 22- to 18-gauge wire and fits a number eight stud. This 600-volt connector can withstand temperatures up to 75 Degrees C. It has a crimp tin-plated copper connection with a butted seam. This connector meets CSA standards.
These ring terminals are designed for a 12- to 10-gauge wire and fit a number eight stud. These terminals have a nylon insulation and come in a pack of 50.
These ring terminals are designed for a 12- to 10-gauge wire and fit a number eight stud. These terminals have a nylon insulation and come in a pack of 50.
These ring connectors are designed for a 16- to 14-gauge wire and fit a 5/16-inch stud. These 600-volt connectors are 4 1/64 inches long and can withstand temperatures up to 105 Degrees C. They have heat-shrink tubing insulation and a copper alloy 110 connection with a brazed seam. These connectors come in a pack of 25.
These ring connectors are designed for a 16- to 14-gauge wire and fit a 5/16-inch stud. These 600-volt connectors are 4 1/64 inches long and can withstand temperatures up to 105 Degrees C. They have heat-shrink tubing insulation and a copper alloy 110 connection with a brazed seam. These connectors come in a pack of 25.
These ring terminals are designed for a 12- to 10-gauge wire and fit a 3/8-inch stud. They have a yellow flared vinyl insulation and a tin-plated copper crimp connection with a butted seam. These 600-volt ring terminals are 4 13/32 inches long and can withstand temperatures up to 75 Degrees C. They meet CSA standards and come in a pack of 50.
These ring terminals are designed for a 12- to 10-gauge wire and fit a 3/8-inch stud. They have a yellow flared vinyl insulation and a tin-plated copper crimp connection with a butted seam. These 600-volt ring terminals are 4 13/32 inches long and can withstand temperatures up to 75 Degrees C. They meet CSA standards and come in a pack of 50.
This non-insulated, starter/ground lug ring is designed for eight-gauge wire, fits a 5/16-inch stud, and is four inches long. It can withstand a maximum temperature of 1083 Degrees C. Made of copper alloy 110 with electro-tin plating, and a brazed seam, this item comes 25 per pack.
This non-insulated, starter/ground lug ring is designed for eight-gauge wire, fits a 5/16-inch stud, and is four inches long. It can withstand a maximum temperature of 1083 Degrees C. Made of copper alloy 110 with electro-tin plating, and a brazed seam, this item comes 25 per pack.
These non-insulated ring terminals are designed for a 16- to 14-gauge wire and fit a number 10 stud. These 600-volt terminals are 4 1/64 inches long and can withstand temperatures up to 75 Degrees C. They have a copper alloy 110 connection with a brazed seam. These terminals meet CSA standards and come in a pack of 100.
These non-insulated ring terminals are designed for a 16- to 14-gauge wire and fit a number 10 stud. These 600-volt terminals are 4 1/64 inches long and can withstand temperatures up to 75 Degrees C. They have a copper alloy 110 connection with a brazed seam. These terminals meet CSA standards and come in a pack of 100.
These ring terminals are designed for a 16- to 14-gauge wire and fit a number eight stud. These 600-volt terminals are 4 13/32 inches long and can withstand temperatures up to 75 Degrees C. They have nylon insulation and a copper alloy 110 connection with a butted seamless brass end. These terminals come in a pack of 100.
These ring terminals are designed for a 16- to 14-gauge wire and fit a number eight stud. These 600-volt terminals are 4 13/32 inches long and can withstand temperatures up to 75 Degrees C. They have nylon insulation and a copper alloy 110 connection with a butted seamless brass end. These terminals come in a pack of 100.
These ring terminals are designed for a 22- to 18-gauge wire and fit a number 10 stud. These 600-volt terminals are 4 13/32 inches long and can withstand temperatures up to 75 Degrees C. They have nylon insulation and a copper alloy 110 connection with a butted seamless brass end. These terminals come in a pack of 100.
These ring terminals are designed for a 22- to 18-gauge wire and fit a number 10 stud. These 600-volt terminals are 4 13/32 inches long and can withstand temperatures up to 75 Degrees C. They have nylon insulation and a copper alloy 110 connection with a butted seamless brass end. These terminals come in a pack of 100.
These ring terminals are designed for a 16- to 14-gauge wire and fit a size six stud. They have a blue flared vinyl insulation and a copper alloy 110 connection with a butted seam. These 600-volt ring terminals are 4 13/32 inches long and can withstand temperatures up to 75 Degrees C. They meet CSA standards and come in a pack of 100.
These ring terminals are designed for a 16- to 14-gauge wire and fit a size six stud. They have a blue flared vinyl insulation and a copper alloy 110 connection with a butted seam. These 600-volt ring terminals are 4 13/32 inches long and can withstand temperatures up to 75 Degrees C. They meet CSA standards and come in a pack of 100.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
