Retaining and Lock Ring Pliers

Designed to install or remove circlips and retaining rings such as the Anderton N1300, 1302 and 1308: Industrial 3000 and 4000: and Truarc N5000, 5002 and 5008. These snap ring pliers are convertible, comes with fixed a 0.090-inch tip angled at 90 degrees, and have an overall length of 9 1/4 inches. The bore diameter has a size range of 1.1812 to two inches and 2.062 to three inches.

Designed to install or remove circlips and retaining rings such as the Anderton N1300, 1302 and 1308: Industrial 3000 and 4000: and Truarc N5000, 5002 and 5008. These snap ring pliers are convertible, comes with fixed a 0.090-inch tip angled at 90 degrees, and have an overall length of 9 1/4 inches. The bore diameter has a size range of 1.1812 to two inches and 2.062 to three inches.

Designed to install or remove circlips and retaining rings, these internal snap ring pliers have replaceable tips, an overall length of 7 1/2 inches with a bore diameter of 3/8 inch.

Designed to install or remove circlips and retaining rings, these internal snap ring pliers have replaceable tips, an overall length of 7 1/2 inches with a bore diameter of 3/8 inch.

Built to install or remove circlips and retaining rings, these six-inch industrial snap ring pliers are convertible and come with a 0.047-inch tip angled at 18 degrees. The bore diameter has a size range of 5/16 to 3/8 inches.

Built to install or remove circlips and retaining rings, these six-inch industrial snap ring pliers are convertible and come with a 0.047-inch tip angled at 18 degrees. The bore diameter has a size range of 5/16 to 3/8 inches.

Made for installing or removing circlips and retaining rings, these industrial external snap ring pliers have fixed tips and vinyl grips. These pliers have straight-angled, 038-inch tips, a shaft diameter of 0.125 to one inch, and an overall length of 6 1/4 inches.

Made for installing or removing circlips and retaining rings, these industrial external snap ring pliers have fixed tips and vinyl grips. These pliers have straight-angled, 038-inch tips, a shaft diameter of 0.125 to one inch, and an overall length of 6 1/4 inches.

Built to install or remove circlips and retaining rings, these six-inch industrial, internal snap ring pliers come with vinyl grips and a fixed 0.038-inch tip angled at 45 degrees. The bore diameter has a size range of 1 0.750 to 1.375 inches.

Built to install or remove circlips and retaining rings, these six-inch industrial, internal snap ring pliers come with vinyl grips and a fixed 0.038-inch tip angled at 45 degrees. The bore diameter has a size range of 1 0.750 to 1.375 inches.

Designed to install or remove circlips and retaining rings, these heavy-duty internal snap ring pliers have a spring ratchet lock assembly, an overall length of 9 1/2 inches with a shaft diameter of 2 7/16, and a bore diameter of four inches.

Designed to install or remove circlips and retaining rings, these heavy-duty internal snap ring pliers have a spring ratchet lock assembly, an overall length of 9 1/2 inches with a shaft diameter of 2 7/16, and a bore diameter of four inches.

Built to install or remove circlips and retaining rings, these industrial external snap ring pliers have fixed tips and vinyl grips. These pliers have straight-angled, 0.070-inch tips, a bore diameter of 0.312 to two inches, and an overall length of seven inches.

Built to install or remove circlips and retaining rings, these industrial external snap ring pliers have fixed tips and vinyl grips. These pliers have straight-angled, 0.070-inch tips, a bore diameter of 0.312 to two inches, and an overall length of seven inches.

Built to install or remove circlips and retaining rings, these industrial internal snap ring pliers have fixed tips and vinyl grips. These pliers have straight-angled, 0.038-inch tips, a shaft diameter of 0.375 to 1.023 inches, and an overall length of 5 1/2 inches.

Built to install or remove circlips and retaining rings, these industrial internal snap ring pliers have fixed tips and vinyl grips. These pliers have straight-angled, 0.038-inch tips, a shaft diameter of 0.375 to 1.023 inches, and an overall length of 5 1/2 inches.

Designed to install or remove circlips and retaining rings, these snap ring pliers are convertible, comes with fixed a 0.047-inch tip angled at 90 degrees and have an overall length of six inches. The bore diameter ranges from 5/16 to 3/8 inch.

Designed to install or remove circlips and retaining rings, these snap ring pliers are convertible, comes with fixed a 0.047-inch tip angled at 90 degrees and have an overall length of six inches. The bore diameter ranges from 5/16 to 3/8 inch.

Designed to install or remove circlips and retaining rings, these convertible snap ring pliers change from internal to external with just a simple switch. These pliers have straight-angled, 0.047-inch tips, and an overall length of 5 1/2 inches. The shaft diameter ranges 0.687 to 0.875 inches, 0.812 to one inch, and 0.312 to 0.375 inch.

Designed to install or remove circlips and retaining rings, these convertible snap ring pliers change from internal to external with just a simple switch. These pliers have straight-angled, 0.047-inch tips, and an overall length of 5 1/2 inches. The shaft diameter ranges 0.687 to 0.875 inches, 0.812 to one inch, and 0.312 to 0.375 inch.

Made for installing or removing circlips and retaining rings, these convertible snap ring pliers change from internal to external with just a simple switch. These pliers have straight-angled, 0.038-inch tips, shaft diameter of 0.250 to 0.672 inches, and an overall length of six inches.

Made for installing or removing circlips and retaining rings, these convertible snap ring pliers change from internal to external with just a simple switch. These pliers have straight-angled, 0.038-inch tips, shaft diameter of 0.250 to 0.672 inches, and an overall length of six inches.

Built to install or remove circlips and retaining rings, these convertible snap ring pliers change from internal to external with just a simple switch. Spring-loaded for ease of use and comes with durable grips which are made of low temperature, high impact material for added comfort. These pliers have interchangeable tips and an overall length of eight inches.

Built to install or remove circlips and retaining rings, these convertible snap ring pliers change from internal to external with just a simple switch. Spring-loaded for ease of use and comes with durable grips which are made of low temperature, high impact material for added comfort. These pliers have interchangeable tips and an overall length of eight inches.

This replacement tip kit is built to fit heavy-duty retaining ring pliers B112 and B113. These tips are 0.120 inches in size with a variety of angles including straight, 15 degrees, 45 degrees, and 90 degrees.

This replacement tip kit is built to fit heavy-duty retaining ring pliers B112 and B113. These tips are 0.120 inches in size with a variety of angles including straight, 15 degrees, 45 degrees, and 90 degrees.

Recommended for automotive applications including ignition, distributor and spark plug terminals. Strip and crimp insulated wires with an 18, 16, 14, 12, and 10 gauge, or non-insulated connections seven- or eight-millimetre gauge. This heavy-duty multi-purpose plier has a total length of 9 3/4 inches.

Recommended for automotive applications including ignition, distributor and spark plug terminals. Strip and crimp insulated wires with an 18, 16, 14, 12, and 10 gauge, or non-insulated connections seven- or eight-millimetre gauge. This heavy-duty multi-purpose plier has a total length of 9 3/4 inches.

Designed to install or remove circlips and retaining rings such as the Anderton 1408, Industrial 4100, and Truarc 5108. These snap ring pliers are convertible, come with fixed a 0.090-inch tip angled at 45 degrees and have an overall length of 9 1/4 inches. The shaft diameter ranges from 2.156 to 3.25 inches.

Designed to install or remove circlips and retaining rings such as the Anderton 1408, Industrial 4100, and Truarc 5108. These snap ring pliers are convertible, come with fixed a 0.090-inch tip angled at 45 degrees and have an overall length of 9 1/4 inches. The shaft diameter ranges from 2.156 to 3.25 inches.

Built to install or remove circlips and retaining rings, these snap ring pliers are convertible, comes with fixed a 0.070-inch tip angled at 90 degrees and have an overall length of seven inches. The bore diameter ranges from 1 1/16 to two inches.

Built to install or remove circlips and retaining rings, these snap ring pliers are convertible, comes with fixed a 0.070-inch tip angled at 90 degrees and have an overall length of seven inches. The bore diameter ranges from 1 1/16 to two inches.