Respirator Fit Testing

This bitter taste fit test solution has Bitrex as a fit testing protocol. It has a volume of 55-mililitre and is suitable for use with FT-30 qualitative fit test apparatus. The solution can be used to check the face-to-respirator seal on any particulate respirator or gas/vapour respirator with a particulate pre-filter.

This bitter taste fit test solution has Bitrex as a fit testing protocol. It has a volume of 55-mililitre and is suitable for use with FT-30 qualitative fit test apparatus. The solution can be used to check the face-to-respirator seal on any particulate respirator or gas/vapour respirator with a particulate pre-filter.

This bitter taste sensitivity solution is used to test the sensitivity of the respirator wearer to a bitter solution and has Bitrex as a fit testing protocol. It has a volume of 55-mililitre and is suitable for use with FT-30 qualitative fit test apparatus. The solution can be used to check the face-to-respirator seal on any particulate respirator or gas/vapour respirator with a particulate pre-filter.

This bitter taste sensitivity solution is used to test the sensitivity of the respirator wearer to a bitter solution and has Bitrex as a fit testing protocol. It has a volume of 55-mililitre and is suitable for use with FT-30 qualitative fit test apparatus. The solution can be used to check the face-to-respirator seal on any particulate respirator or gas/vapour respirator with a particulate pre-filter.

Smoke fit test kits. Lower cost option. Meest OSHA protocol for fit testing with smoke. Qualitative. Respirator smoke tubes, 6 per box.

Smoke fit test kits. Lower cost option. Meest OSHA protocol for fit testing with smoke. Qualitative. Respirator smoke tubes, 6 per box.

This sweet taste fit test solution has saccharin as a fit testing protocol. It has a volume of 55-mililitre and is suitable for use with FT-10 qualitative fit test apparatus and FT-20 training and fit testing case. The solution can be used to check the face-to-respirator seal on any particulate respirator or gas/vapour respirator with a particulate pre-filter.

This sweet taste fit test solution has saccharin as a fit testing protocol. It has a volume of 55-mililitre and is suitable for use with FT-10 qualitative fit test apparatus and FT-20 training and fit testing case. The solution can be used to check the face-to-respirator seal on any particulate respirator or gas/vapour respirator with a particulate pre-filter.

This banana oil qualitative fit test ampule comes in white and meets the NIOSH standard. There are 10 ampules in a pack.

This banana oil qualitative fit test ampule comes in white and meets the NIOSH standard. There are 10 ampules in a pack.

This sweet taste sensitivity solution is used to test the sensitivity of the respirator wearer to a saccharin solution. It has a volume of 55-mililitre and is suitable for use with FT-10 qualitative fit test apparatus and FT-20 training and fit testing case. The solution can be used to check the face-to-respirator seal on any particulate respirator or gas/vapour respirator with a particulate pre-filter.

This sweet taste sensitivity solution is used to test the sensitivity of the respirator wearer to a saccharin solution. It has a volume of 55-mililitre and is suitable for use with FT-10 qualitative fit test apparatus and FT-20 training and fit testing case. The solution can be used to check the face-to-respirator seal on any particulate respirator or gas/vapour respirator with a particulate pre-filter.

This qualitative fit test apparatus includes a hood, collar, two nebulizers, a bitter-tasting sensitivity solution, a bitter-tasting fit test solution, and laminated user instructions. It uses a test solution of Bitrex to produce a very bitter taste. The apparatus is suitable for use with any particulate respirator or any gas/vapour respirator with a particulate filter.

This qualitative fit test apparatus includes a hood, collar, two nebulizers, a bitter-tasting sensitivity solution, a bitter-tasting fit test solution, and laminated user instructions. It uses a test solution of Bitrex to produce a very bitter taste. The apparatus is suitable for use with any particulate respirator or any gas/vapour respirator with a particulate filter.

This smoke fit test kit has a vinyl protective pouch, hand operated air bulb with 2 2/5 ounces capacity, a beaker tool, six smoke tubes, and poly tubing. It has a stannic chloride solution that comes in a glass container with rubber caps for protection and storage. The kit is for use with air-purifying respirators.

This smoke fit test kit has a vinyl protective pouch, hand operated air bulb with 2 2/5 ounces capacity, a beaker tool, six smoke tubes, and poly tubing. It has a stannic chloride solution that comes in a glass container with rubber caps for protection and storage. The kit is for use with air-purifying respirators.

This Bitrex test solution comes in glass ampules with a pre-drilled plastic cap. The ampules contain 2.5 cc of solution that averages 3 to 5 fit tests per tube. It is for use with a bitter qualitative fit test kit. There are six bitter test solution ampules in a box.

This Bitrex test solution comes in glass ampules with a pre-drilled plastic cap. The ampules contain 2.5 cc of solution that averages 3 to 5 fit tests per tube. It is for use with a bitter qualitative fit test kit. There are six bitter test solution ampules in a box.

This Saccharin test solution comes in glass ampules with a pre-drilled plastic cap. The ampules contain 2.5 cc of solution that averages 3 to 5 fit tests per tube. It is for use with Saccharin qualitative fit test kit. There are six Saccharin test solution ampules in a box.

This Saccharin test solution comes in glass ampules with a pre-drilled plastic cap. The ampules contain 2.5 cc of solution that averages 3 to 5 fit tests per tube. It is for use with Saccharin qualitative fit test kit. There are six Saccharin test solution ampules in a box.

This fit test collar is suitable for use with FT-10/FT-30 qualitative fit test apparatus and FT-20 training and fit testing case. It is to be used in conjunction test hood. The collar can be used to check the face-to-respirator seal on any particulate respirator or gas/vapour respirator with a particulate PRE-FILTER.

This fit test collar is suitable for use with FT-10/FT-30 qualitative fit test apparatus and FT-20 training and fit testing case. It is to be used in conjunction test hood. The collar can be used to check the face-to-respirator seal on any particulate respirator or gas/vapour respirator with a particulate PRE-FILTER.

This test hood is suitable for use with FT-10/FT-30 qualitative fit test apparatus and FT-20 training and fit testing case. The hood can be used to check the face-to-respirator seal on any particulate respirator or gas/vapour respirator with a particulate PRE-FILTER. There are two hoods in a pack.

This test hood is suitable for use with FT-10/FT-30 qualitative fit test apparatus and FT-20 training and fit testing case. The hood can be used to check the face-to-respirator seal on any particulate respirator or gas/vapour respirator with a particulate PRE-FILTER. There are two hoods in a pack.

This Bitrex sensitivity solution comes in glass ampules with a pre-drilled plastic cap. The ampules contain 2.5 cc of solution that averages 3 to 5 fit tests per tube. It is for use with a bitter qualitative fit test kit. There are six bitter sensitivity solution ampules in a box.

This Bitrex sensitivity solution comes in glass ampules with a pre-drilled plastic cap. The ampules contain 2.5 cc of solution that averages 3 to 5 fit tests per tube. It is for use with a bitter qualitative fit test kit. There are six bitter sensitivity solution ampules in a box.

This aspirator bulb has an irritant smoke fit testing protocol and is designed for use with a standard smoke test kit.

This aspirator bulb has an irritant smoke fit testing protocol and is designed for use with a standard smoke test kit.

These fit check ampules have 0.33 millilitre fluid volume with iso amyl acetate fit testing protocol. They are designed for use with the banana oil qualitative fit test kit. There are 10 ampules in a box.

These fit check ampules have 0.33 millilitre fluid volume with iso amyl acetate fit testing protocol. They are designed for use with the banana oil qualitative fit test kit. There are 10 ampules in a box.