Product ITEM is unavailable. See products from the same category below.
Ratcheting Combination Wrenches
Ratcheting combination wrenches have a box end design on one end of the handle with a gear mechanism that allows the wrench to rotate freely in one direction without removing the wrench head from the fastener and repositioning the wrench. The box end fits around and grips the entire head of the fastener for more contact than an open end wrench and can apply more torque since the box end is less likely to slip off the fastener compared to an open end design. The opposite end of the wrench has an open end design that allows top and side access to the fastener while the box end can only access a fastener from the top.
This wrench has a length of 8⅛ inch, plus it weighs 0.413 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ANSI. In addition, it is made of alloy steel, has a metric measurement type, is corrosion-resistant, has a chrome finish, is not non-magnetic, and is tether capable.
This wrench has a length of 8⅛ inch, plus it weighs 0.413 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ANSI. In addition, it is made of alloy steel, has a metric measurement type, is corrosion-resistant, has a chrome finish, is not non-magnetic, and is tether capable.
This wrench has a length of 19⅝ inch, plus it weighs 1.909 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ASME B107.100. In addition, it is made of alloy steel, has a SAE measurement type, is corrosion-resistant, has a chrome finish, is not non-magnetic, and is not tether capable.
This wrench has a length of 19⅝ inch, plus it weighs 1.909 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ASME B107.100. In addition, it is made of alloy steel, has a SAE measurement type, is corrosion-resistant, has a chrome finish, is not non-magnetic, and is not tether capable.
This wrench has a length of 9 inch, plus it weighs 0.554 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ANSI, DIN. In addition, it is made of alloy steel, has a metric measurement type, is corrosion-resistant, has a chrome finish, is not non-magnetic, and is tether capable.
This wrench has a length of 9 inch, plus it weighs 0.554 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ANSI, DIN. In addition, it is made of alloy steel, has a metric measurement type, is corrosion-resistant, has a chrome finish, is not non-magnetic, and is tether capable.
This wrench has a length of 10 inch, plus it weighs 0.642 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ANSI, DIN. In addition, it is made of alloy steel, has a metric measurement type, is corrosion-resistant, has a chrome finish, is not non-magnetic, and is tether capable.
This wrench has a length of 10 inch, plus it weighs 0.642 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ANSI, DIN. In addition, it is made of alloy steel, has a metric measurement type, is corrosion-resistant, has a chrome finish, is not non-magnetic, and is tether capable.
This wrench has a length of 12½ inch, plus it weighs 1.166 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ANSI, DIN. In addition, it is made of alloy steel, has a metric measurement type, is corrosion-resistant, has a chrome finish, is not non-magnetic, and is tether capable.
This wrench has a length of 12½ inch, plus it weighs 1.166 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ANSI, DIN. In addition, it is made of alloy steel, has a metric measurement type, is corrosion-resistant, has a chrome finish, is not non-magnetic, and is tether capable.
This wrench has a length of 13 inch, plus it weighs 1.276 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ANSI, DIN. In addition, it is made of alloy steel, has a metric measurement type, is corrosion-resistant, has a chrome finish, is not non-magnetic, and is tether capable.
This wrench has a length of 13 inch, plus it weighs 1.276 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ANSI, DIN. In addition, it is made of alloy steel, has a metric measurement type, is corrosion-resistant, has a chrome finish, is not non-magnetic, and is tether capable.
This wrench has a length of 10⅛ inch, plus it weighs 0.608 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ANSI. In addition, it is made of alloy steel, has a SAE measurement type, is corrosion-resistant, has a chrome finish, is not non-magnetic, and is tether capable.
This wrench has a length of 10⅛ inch, plus it weighs 0.608 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ANSI. In addition, it is made of alloy steel, has a SAE measurement type, is corrosion-resistant, has a chrome finish, is not non-magnetic, and is tether capable.
This wrench has a length of 8½ inch, plus it weighs 0.515 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ANSI, DIN. In addition, it is made of alloy steel, has a SAE measurement type, is corrosion-resistant, has a chrome finish, is not non-magnetic, and is not tether capable.
This wrench has a length of 8½ inch, plus it weighs 0.515 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ANSI, DIN. In addition, it is made of alloy steel, has a SAE measurement type, is corrosion-resistant, has a chrome finish, is not non-magnetic, and is not tether capable.
This wrench has a length of 8½ inch, plus it weighs 0.515 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ANSI, DIN. In addition, it is made of alloy steel, has a metric measurement type, is corrosion-resistant, has a chrome finish, is not non-magnetic, and is not tether capable.
This wrench has a length of 8½ inch, plus it weighs 0.515 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ANSI, DIN. In addition, it is made of alloy steel, has a metric measurement type, is corrosion-resistant, has a chrome finish, is not non-magnetic, and is not tether capable.
This wrench has a length of 5⅞ inch, plus it weighs 0.051 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ANSI B107.100. In addition, it is made of alloy steel, has a SAE measurement type, is corrosion-resistant, has a chrome finish, is not non-magnetic, and is not tether capable.
This wrench has a length of 5⅞ inch, plus it weighs 0.051 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ANSI B107.100. In addition, it is made of alloy steel, has a SAE measurement type, is corrosion-resistant, has a chrome finish, is not non-magnetic, and is not tether capable.
This wrench has a length of 11½ inch, plus it weighs 0.363 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ANSI B107.100. In addition, it is made of alloy steel, has a SAE measurement type, is corrosion-resistant, has a chrome finish, is not non-magnetic, and is not tether capable.
This wrench has a length of 11½ inch, plus it weighs 0.363 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ANSI B107.100. In addition, it is made of alloy steel, has a SAE measurement type, is corrosion-resistant, has a chrome finish, is not non-magnetic, and is not tether capable.
This wrench has a length of 15¾ inch, plus it weighs 1.75 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ANSI B107.100. In addition, it is made of alloy steel, has a SAE measurement type, is corrosion-resistant, has a chrome finish, is not non-magnetic, and is not tether capable.
This wrench has a length of 15¾ inch, plus it weighs 1.75 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ANSI B107.100. In addition, it is made of alloy steel, has a SAE measurement type, is corrosion-resistant, has a chrome finish, is not non-magnetic, and is not tether capable.
This wrench has a length of 22⅝ inch, plus it weighs 2.608 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ANSI B107.100. In addition, it is made of alloy steel, has a SAE measurement type, is corrosion-resistant, has a chrome finish, is not non-magnetic, and is not tether capable.
This wrench has a length of 22⅝ inch, plus it weighs 2.608 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ANSI B107.100. In addition, it is made of alloy steel, has a SAE measurement type, is corrosion-resistant, has a chrome finish, is not non-magnetic, and is not tether capable.
This wrench has a length of 19⅝ inch, plus it weighs 0.173 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ANSI B107.100. In addition, it is made of alloy steel, has a metric measurement type, is corrosion-resistant, has a chrome finish, is not non-magnetic, and is not tether capable.
This wrench has a length of 19⅝ inch, plus it weighs 0.173 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ANSI B107.100. In addition, it is made of alloy steel, has a metric measurement type, is corrosion-resistant, has a chrome finish, is not non-magnetic, and is not tether capable.
This wrench has a length of 7 inch, plus it weighs 0.08 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ANSI B107.100. In addition, it is made of alloy steel, has a SAE measurement type, is corrosion-resistant, has a chrome finish, is not non-magnetic, and is not tether capable.
This wrench has a length of 7 inch, plus it weighs 0.08 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ANSI B107.100. In addition, it is made of alloy steel, has a SAE measurement type, is corrosion-resistant, has a chrome finish, is not non-magnetic, and is not tether capable.
This wrench has a length of 12 inch, plus it weighs 0.319 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ANSI B107.100. In addition, it is made of alloy steel, has a SAE measurement type, is corrosion-resistant, has a chrome finish, is not non-magnetic, and is not tether capable.
This wrench has a length of 12 inch, plus it weighs 0.319 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ANSI B107.100. In addition, it is made of alloy steel, has a SAE measurement type, is corrosion-resistant, has a chrome finish, is not non-magnetic, and is not tether capable.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
