Product ITEM is unavailable. See products from the same category below.
Ratcheting Combination Wrenches
Ratcheting combination wrenches have a box end design on one end of the handle with a gear mechanism that allows the wrench to rotate freely in one direction without removing the wrench head from the fastener and repositioning the wrench. The box end fits around and grips the entire head of the fastener for more contact than an open end wrench and can apply more torque since the box end is less likely to slip off the fastener compared to an open end design. The opposite end of the wrench has an open end design that allows top and side access to the fastener while the box end can only access a fastener from the top.
This wrench has a length of 9 inch, plus it weighs 0.299 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ANSI B107.100-2010. In addition, it is made of alloy steel, has a metric measurement type, is corrosion-resistant, has a chrome finish, is not non-magnetic, and is not tether capable.
This wrench has a length of 9 inch, plus it weighs 0.299 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ANSI B107.100-2010. In addition, it is made of alloy steel, has a metric measurement type, is corrosion-resistant, has a chrome finish, is not non-magnetic, and is not tether capable.
This wrench has a length of 7⅞ inch, plus it weighs 0.23 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ANSI B107.100-2010. In addition, it is made of alloy steel, has a SAE measurement type, is corrosion-resistant, has a chrome finish, is not non-magnetic, and is not tether capable.
This wrench has a length of 7⅞ inch, plus it weighs 0.23 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ANSI B107.100-2010. In addition, it is made of alloy steel, has a SAE measurement type, is corrosion-resistant, has a chrome finish, is not non-magnetic, and is not tether capable.
This wrench has a length of 8⅜ inch, plus it weighs 0.23 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ANSI B107.100-2010. In addition, it is made of alloy steel, has a SAE measurement type, is corrosion-resistant, has a chrome finish, is not non-magnetic, and is not tether capable.
This wrench has a length of 8⅜ inch, plus it weighs 0.23 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ANSI B107.100-2010. In addition, it is made of alloy steel, has a SAE measurement type, is corrosion-resistant, has a chrome finish, is not non-magnetic, and is not tether capable.
This wrench has a length of 7⅞ inch, plus it weighs 0.23 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ANSI B107.100-2010. In addition, it is made of alloy steel, has a metric measurement type, is corrosion-resistant, has a chrome finish, is not non-magnetic, and is not tether capable.
This wrench has a length of 7⅞ inch, plus it weighs 0.23 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ANSI B107.100-2010. In addition, it is made of alloy steel, has a metric measurement type, is corrosion-resistant, has a chrome finish, is not non-magnetic, and is not tether capable.
This wrench has a length of 6¾ inch, plus it weighs 0.146 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ANSI B107.100-2010. In addition, it is made of alloy steel, has a SAE measurement type, is corrosion-resistant, has a chrome finish, is not non-magnetic, and is not tether capable.
This wrench has a length of 6¾ inch, plus it weighs 0.146 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ANSI B107.100-2010. In addition, it is made of alloy steel, has a SAE measurement type, is corrosion-resistant, has a chrome finish, is not non-magnetic, and is not tether capable.
This wrench has a length of 9⅜ inch, plus it weighs 0.386 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ANSI B107.100-2010. In addition, it is made of alloy steel, has a SAE measurement type, is corrosion-resistant, has a chrome finish, is not non-magnetic, and is not tether capable.
This wrench has a length of 9⅜ inch, plus it weighs 0.386 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ANSI B107.100-2010. In addition, it is made of alloy steel, has a SAE measurement type, is corrosion-resistant, has a chrome finish, is not non-magnetic, and is not tether capable.
This wrench has a length of 6¾ inch, plus it weighs 0.14 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ANSI B107.100-2010. In addition, it is made of alloy steel, has a metric measurement type, is corrosion-resistant, has a chrome finish, is not non-magnetic, and is not tether capable.
This wrench has a length of 6¾ inch, plus it weighs 0.14 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ANSI B107.100-2010. In addition, it is made of alloy steel, has a metric measurement type, is corrosion-resistant, has a chrome finish, is not non-magnetic, and is not tether capable.
This wrench has a length of 7½ inch, plus it weighs 0.208 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ANSI B107.100-2010. In addition, it is made of alloy steel, has a metric measurement type, is corrosion-resistant, has a chrome finish, is not non-magnetic, and is not tether capable.
This wrench has a length of 7½ inch, plus it weighs 0.208 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ANSI B107.100-2010. In addition, it is made of alloy steel, has a metric measurement type, is corrosion-resistant, has a chrome finish, is not non-magnetic, and is not tether capable.
This wrench has a length of 7⅛ inch, plus it weighs 0.168 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ANSI B107.100-2010. In addition, it is made of alloy steel, has a SAE measurement type, is corrosion-resistant, has a chrome finish, is not non-magnetic, and is not tether capable.
This wrench has a length of 7⅛ inch, plus it weighs 0.168 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ANSI B107.100-2010. In addition, it is made of alloy steel, has a SAE measurement type, is corrosion-resistant, has a chrome finish, is not non-magnetic, and is not tether capable.
This wrench has a length of 10 inch, plus it weighs 0.454 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ANSI B107.100-2010. In addition, it is made of alloy steel, has a SAE measurement type, is corrosion-resistant, has a chrome finish, is not non-magnetic, and is not tether capable.
This wrench has a length of 10 inch, plus it weighs 0.454 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ANSI B107.100-2010. In addition, it is made of alloy steel, has a SAE measurement type, is corrosion-resistant, has a chrome finish, is not non-magnetic, and is not tether capable.
This wrench has a length of 6¾ inch, plus it weighs 0.143 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ANSI B107.100-2010. In addition, it is made of alloy steel, has a metric measurement type, is corrosion-resistant, has a chrome finish, is not non-magnetic, and is not tether capable.
This wrench has a length of 6¾ inch, plus it weighs 0.143 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ANSI B107.100-2010. In addition, it is made of alloy steel, has a metric measurement type, is corrosion-resistant, has a chrome finish, is not non-magnetic, and is not tether capable.
This wrench has a length of 7⅛ inch, plus it weighs 0.168 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ANSI B107.100-2010. In addition, it is made of alloy steel, has a metric measurement type, is corrosion-resistant, has a chrome finish, is not non-magnetic, and is not tether capable.
This wrench has a length of 7⅛ inch, plus it weighs 0.168 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ANSI B107.100-2010. In addition, it is made of alloy steel, has a metric measurement type, is corrosion-resistant, has a chrome finish, is not non-magnetic, and is not tether capable.
This wrench has a length of 9⅜ inch, plus it weighs 0.386 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ANSI B107.100-2010. In addition, it is made of alloy steel, has a metric measurement type, is corrosion-resistant, has a chrome finish, is not non-magnetic, and is not tether capable.
This wrench has a length of 9⅜ inch, plus it weighs 0.386 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ANSI B107.100-2010. In addition, it is made of alloy steel, has a metric measurement type, is corrosion-resistant, has a chrome finish, is not non-magnetic, and is not tether capable.
This wrench has a length of 11 inch, plus it weighs 0.566 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ANSI B107.100-2010. In addition, it is made of alloy steel, has a metric measurement type, is corrosion-resistant, has a chrome finish, is not non-magnetic, and is not tether capable.
This wrench has a length of 11 inch, plus it weighs 0.566 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ANSI B107.100-2010. In addition, it is made of alloy steel, has a metric measurement type, is corrosion-resistant, has a chrome finish, is not non-magnetic, and is not tether capable.
This wrench has a length of 10½ inch, plus it weighs 0.492 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ANSI B107.100-2010. In addition, it is made of alloy steel, has a metric measurement type, is corrosion-resistant, has a chrome finish, is not non-magnetic, and is not tether capable.
This wrench has a length of 10½ inch, plus it weighs 0.492 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ANSI B107.100-2010. In addition, it is made of alloy steel, has a metric measurement type, is corrosion-resistant, has a chrome finish, is not non-magnetic, and is not tether capable.
This wrench has a length of 11 inch, plus it weighs 0.566 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ANSI B107.100-2010. In addition, it is made of alloy steel, has a SAE measurement type, is corrosion-resistant, has a chrome finish, is not non-magnetic, and is not tether capable.
This wrench has a length of 11 inch, plus it weighs 0.566 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ANSI B107.100-2010. In addition, it is made of alloy steel, has a SAE measurement type, is corrosion-resistant, has a chrome finish, is not non-magnetic, and is not tether capable.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
