!
Browser upgrade recommended: Improve your Grainger.ca experience by upgrading your browser to Edge or Chrome. Learn more about our supported browsers.
Back to Top

Filter Results By

Applied Filters
Clear All

Shop By
Brand
Price
Cutting Action
Tool Length
Suggested results for "SUGGEST-ITEM"
Product ITEM is unavailable. See products from the same category below.

Pipe, Tubing & Conduit Hand Cutters

Hand-powered cutters slice through pipe, tubing, or conduit to cut a length for installation or remove damaged sections when making repairs. They make cleaner cuts than saws, leaving smoother edges that require less deburring. Getting an optimal cut requires matching a cutter to the form (pipe, tubing, or conduit) and type (plastic, metal, clay, etc.) of material being cut. Pipe is measured by its nominal inside diameter and typically has thicker walls than tubing and conduit. Tubing and conduit are sized by their outside diameter and typically have thinner walls than pipe.

https://catalogue.grainger.ca/?hybris=true

20 Results Found

In stock at branch(0)
Results per page :  16 | 32 | 48
  • GEDORE
  • PIPE CUTTER, 1/8 - 1 1/3 IN, PRESSURE CAST MAGNESIUM/STEEL/PLASTIC
  • Item # GED2964066
  • Mfr. Model # 2964066
  • EHC: EHC :
  • This pipe cutter has a cutting range between 1/8 to 1 1/3 inches and cuts stainless steel. Its overall length is 6 1/3 inches. The cutter uses a screw feed cutting action and has a body of pressure-cast magnesium with a steel blade and plastic, design knob handle. It features a retractable deburring tool, and spare cutting wheels are provided in the handle. This is a cutting wheel with a high service life, and the replacement wheel is MFR. No. 2964090.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • GEDORE
  • PIPE CUTTER, 1/8 - 1 1/3 IN, PRESSURE CAST MAGNESIUM/STEEL/PLASTIC
  • Item # GED2964074
  • Mfr. Model # 2964074
  • EHC: EHC :
  • This pipe cutter has a cutting range between 1/8 to 1 1/3 inches and cuts stainless steel. Its overall length is seven inches. The cutter uses a screw feed cutting action and has a body of pressure-cast magnesium with a steel blade and plastic, design knob handle. It features a retractable deburring tool, and spare cutting wheels are provided in the handle. This is a cutting wheel with a high service life and the replacement wheel is MFR. No. 2964090.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • GEDORE
  • PIPE CUTTER, 1/4 - 3 IN, PRESSURE CAST MAGNESIUM/STEEL/PLASTIC
  • Item # GED2964082
  • Mfr. Model # 2964082
  • EHC: EHC :
  • This pipe cutter has a cutting range between 1/4 to three inches and cuts stainless steel. Its overall length is 9 2/3 inches. The cutter uses a screw feed cutting action, has a body of pressure-cast magnesium, a steel blade, and a plastic, design knob handle. It features a retractable deburring tool and spare cutting wheels in the handle. This is a cutting wheel with a high service life and has a replacement wheel of MFR. No. 2964104.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • GEDORE
  • PIPE CUTTER, 1/8 - 1 1/4 X 6 1/2 IN, HIGH ALLOY SS/PRESSURE CAST ZINC
  • Item # GED1154990
  • Mfr. Model # 1154990
  • EHC: EHC :
  • This pipe cutting tool cuts through stainless steel. It has a cutting capacity of 1/8 to 1 1/4 inches and an overall length of 6 1/2 inches. It is a manual cutting action tool. The body is made of pressure-cast zinc while the blade is high-alloy stainless steel. The handle design is contoured and made of steel. This pipe cutter features automatic infeed by plate springs for a very clean cut. Replacement wheel Mfr. No. 1154710.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • GEDORE
  • PIPE CUTTER, 1/8 - 1 1/4 IN, PRESSURE CAST MAGNESIUM/STEEL/PLASTIC
  • Item # GED2964031
  • Mfr. Model # 2964031
  • EHC: EHC :
  • This pipe cutter has a cutting range between 1/8 to 1 1/4 inches. It cuts copper, brass, light-alloy pipes, PVC hard plastic, plastic-coated pipes, thin-walled steel pipes, and composite pipes. Its overall length is 6 1/3 inches. The cutter uses a screw feed cutting action. Its body is pressure-cast magnesium with a steel blade and plastic, design knob handle. It features a retractable deburring tool, with spare cutting wheels in the handle. The replacement wheel is MFR. No. 2964058.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • GEDORE
  • PIPE CUTTER, 1/8 - 2/3 IN, PRESSURE CAST ZINC/STEEL
  • Item # GED4504560
  • Mfr. Model # 4504560
  • EHC: EHC :
  • This pipe cutter cuts copper, brass, light-alloy pipes, PVC hard plastic, and plastic-coated pipes. Its cutting capacity is 1/8 to 2/3 inches while its overall length is two inches. The cutting action is manual, and the body of the pipe cutter Is made of pressure-cast zinc, with a blade and handle made of steel. The steel handle is contour designed. This pipe cutter has a replacement wheel of Mfr. No. 4504640. This pipe cutter has two guide rollers with recess.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • GEDORE
  • PIPE CUTTER, 1/2 - 2 1/2 IN, PRESSURE CAST ZINC/STEEL
  • Item # GED4504130
  • Mfr. Model # 4504130
  • EHC: EHC :
  • This pipe cutter cuts copper, brass, light-alloy pipes, PVC hard plastic, and plastic-coated pipes. Its cutting capacity is 1/2 to 2 1/2 inches while its overall length is 9 2/3 inches. The cutting action is manual, and the body of the pipe cutter is made of pressure-cast zinc, with a blade and handle made of steel. The handle is contour designed. This pipe cutter features automatic infeed by plate springs for a very clean cut. The replacement wheel is Mfr. No. 4504800.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • GEDORE
  • PIPE CUTTER, 1 1/4 - 4 IN, STEEL
  • Item # GED4503590
  • Mfr. Model # 4503590
  • EHC: EHC :
  • This pipe cutter cuts steel, cast iron, and SML. Its cutting capacity is 1 1/4 to four inches, and the overall length is 20 1/2 inches. The cutting action is manual, and the body is made of cast steel while the blade and handle are made of steel. The handle is a contoured design. The cutter features a heavy-duty, Spindel gunmetal finish and a very clean cut. The replacement wheel is an Mfr. No. 4503830.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • GEDORE
  • PIPE CUTTER, 1 1/4 - 4 IN, STEEL
  • Item # GED4553420
  • Mfr. Model # 4553420
  • EHC: EHC :
  • This pipe cutter has a capacity of 1 1/4 to four inches and can cut steel, cast iron, and SML. It has an overall length of 20 1/2 inches and a manual cutting action. The pipe cutter's body, handle, and blade are made of steel. The handle design is contoured and features a heavy-duty Spindel gunmetal finish. The pipe cutter offers a very clean cut. This pipe cutter has a replacement wheel of Mfr. No. 4503830.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • GEDORE
  • PIPE CUTTER, 3/4 - 1 1/3 IN, PRESSURE CAST ALUMINUM/STAINLESS STEEL
  • Item # GED2963892
  • Mfr. Model # 2963892
  • EHC: EHC :
  • This pipe cutter has a cutting capacity of 3/4 to 1 1/3 inches. Its overall length is 10 1/3 inches. It has a ratcheting cutting action. The blade is made of high-alloy stainless steel while the body is made of pressure-cast aluminum. This pipe cutter features low space requirements, easy handling via ratchet feed with automatic infeed of the cutting wheel with every rotation. The replacement wheel is Mfr. No. 1621440.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • GEDORE
  • PIPE CUTTER, 1 3/4 IN, STEEL/PRESSURE CAST MAGNESIUM/PLASTIC
  • Item # GED1637983
  • Mfr. Model # 1637983
  • EHC: EHC :
  • With a cutting capacity of 1 3/4 inches, this pipe cutter cuts through PE, PP, PB, PEX, PPR, MLP, MSR, VPE, CPVC, PVC, and PVDF. Its length overall is 9 2/3 inches. The cutting action is manual. Its body is made of pressure-cast magnesium while the blade is steel. The handle has a rubbered grip and is made of plastic. This pipe cutter features one-handed operation. The replacement wheel is Mfr No. 2963914.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • GEDORE
  • PIPE CUTTER, 2 - 5 IN, STEEL/PRESSURE CAST ALUMINUM/PLASTIC
  • Item # GED2963957
  • Mfr. Model # 2963957
  • EHC: EHC :
  • With a cutting capacity of 2 to 5 inches, this pipe cutter's length overall is 13 1/2 inches. The cutting action is manual. Its body is made of pressure-cast aluminum while the blade is steel. The handle has a design knob and is made of plastic. This pipe cutter features a retractable deburring tool, a spare cutting wheel in the handle, an adjustable third pressure roller for optimally guiding different pipe dimensions, and a quick release. The replacement wheel is Mfr No. 2963973.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • GEDORE
  • PIPE CUTTER, 1/4 - 3 IN, STEEL/PRESSURE CAST ALUMINUM/PLASTIC
  • Item # GED2964015
  • Mfr. Model # 2964015
  • EHC: EHC :
  • With a cutting capacity of 1/4 to three inches, this pipe cutter's length overall is 9 2/3 inches. The cutting action is manual. Its body is made of pressure-cast aluminum while the blade is steel. This pipe cutter features a retractable deburring tool, a spare cutting wheel in the handle, an adjustable third pressure roller for optimally guiding different pipe dimensions, and a quick release. This pipe cutter cuts plastic pipes and composite pipes and the replacement wheel is Mfr No. 2963973.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • GEDORE
  • PIPE CUTTER, 2 1/2 IN, STEEL/PRESSURE CAST MAGNESIUM/PLASTIC
  • Item # GED2963841
  • Mfr. Model # 2963841
  • EHC: EHC :
  • With a cutting capacity of 2 1/2 inches, this pipe cutter cuts through PE, PP, PB, PEX, PPR, MLP, MSR, VPE, CPVC, PVC, and PVDF. Its length overall is 11 inches. The cutting action is manual. Its body is made of pressure-cast magnesium while the blade is steel. The handle has a rubbered grip and is made of plastic. This pipe cutter features one-handed operation. The replacement wheel is Mfr No. 2963914.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • GEDORE
  • PIPE CUTTER, 3/16 IN TO 11/16 IN OD CUTTING CAPACITY, MANUAL, 2 IN TOOL L, STANDARD SHEAR, 231000
  • Item # WWG425R33
  • Mfr. Model # 231000
  • EHC: EHC :
  • This pipe cutter has a length of 2 inch, plus it weighs 0.125 kg. The steel handle has a knob design. It features for use in barely accessible places. In addition, it is made of steel, zinc. This pipe cutter is designed for: brass, composite, copper, light-alloy, plastic coated, PVC hard plastic, steel.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # 390
  • GEDORE
  • PIPE CUTTER, 1/8 - 1 1/4 IN, PRESSURE CAST ZINC/STEEL
  • Item # GED4504050
  • Mfr. Model # 4504050
  • EHC: EHC :
  • This pipe cutter cuts copper, brass, light-alloy pipes, PVC hard plastic, and plastic-coated pipes. Its cutting capacity is 1/8 to 1 1/4 inches while its overall length is seven inches. The cutting action is manual. Its body is made of pressure-cast zinc, the blade and the handle are made of steel. The handle is contour designed. This pipe cutter features automatic infeed by plate springs for a very clean cut. The replacement wheel is Mfr. No. 4504640.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
Results per page :  16 | 32 | 48

Add to Order List

Your items were added

Your items were added to some lists

Max quantity exceeded. The item could not be added to the following List(s)

No Existing List Found. Please Create New List below.

Your list has been created

Please select a list