Product ITEM is unavailable. See products from the same category below.
Pipe, Tubing & Conduit Hand Cutters
Hand-powered cutters slice through pipe, tubing, or conduit to cut a length for installation or remove damaged sections when making repairs. They make cleaner cuts than saws, leaving smoother edges that require less deburring. Getting an optimal cut requires matching a cutter to the form (pipe, tubing, or conduit) and type (plastic, metal, clay, etc.) of material being cut. Pipe is measured by its nominal inside diameter and typically has thicker walls than tubing and conduit. Tubing and conduit are sized by their outside diameter and typically have thinner walls than pipe.
This safety cutter has a width of 0.75 inch, and a length of 2 inch. The plastic handle is black with an ergonomic style/type. In addition, it is made of steel and is tether ready. This safety cutter is designed for: film, foil, paper, cardboard, cord, paper, plastic, yarn and includes 2 3/16 inch blade, straight blades, and two blades.
This safety cutter has a width of 0.75 inch, and a length of 2 inch. The plastic handle is black with an ergonomic style/type. In addition, it is made of steel and is tether ready. This safety cutter is designed for: film, foil, paper, cardboard, cord, paper, plastic, yarn and includes 2 3/16 inch blade, straight blades, and two blades.
This pipe cutter has a length of 8 inch. The plastic handle has an ergonomic design. It features jaws return to the open position, spring loaded. In addition, it is made of stainless steel, plastic. This pipe cutter is designed for: polyethylene and includes locking loop.
This pipe cutter has a length of 8 inch. The plastic handle has an ergonomic design. It features jaws return to the open position, spring loaded. In addition, it is made of stainless steel, plastic. This pipe cutter is designed for: polyethylene and includes locking loop.
X-CEL(TM) blade - Quick change, reversible blade equals two times blade life. No ratcheting or twisting required. Spring loaded handles for faster positioning. Large 15/8 (42mm) O.D. Capacity. Compact size for easy storage.
X-CEL(TM) blade - Quick change, reversible blade equals two times blade life. No ratcheting or twisting required. Spring loaded handles for faster positioning. Large 15/8 (42mm) O.D. Capacity. Compact size for easy storage.
Tubing and conduit cutters. Clean, square cuts are easily made on copper, brass, aluminum and thin-wall conduit. Now includes X-CEL knob for quicker cutting. Spare wheel included in knob. Capacity: 1/8 - 1 inch. Screw feed with standard wheel.
Tubing and conduit cutters. Clean, square cuts are easily made on copper, brass, aluminum and thin-wall conduit. Now includes X-CEL knob for quicker cutting. Spare wheel included in knob. Capacity: 1/8 - 1 inch. Screw feed with standard wheel.
RIDGID(R) midget tubing cutters, model 101. For up to 15/16 inch O.D. tubing in extreme close quarters, on hard and soft copper, aluminum, brass and plastic tubing. Two rollers opposite cutter wheel permit easier rotation and faster cutting.
RIDGID(R) midget tubing cutters, model 101. For up to 15/16 inch O.D. tubing in extreme close quarters, on hard and soft copper, aluminum, brass and plastic tubing. Two rollers opposite cutter wheel permit easier rotation and faster cutting.
This tubing cutter has a width of 2 inch, a height of 1 inch, and a length of 8 inch. It features high carbon blade. In addition, it is made of aluminum, and is not tether ready. This tubing cutter is designed for: nylon, polyethylene, polyurethane, PVC.
This tubing cutter has a width of 2 inch, a height of 1 inch, and a length of 8 inch. It features high carbon blade. In addition, it is made of aluminum, and is not tether ready. This tubing cutter is designed for: nylon, polyethylene, polyurethane, PVC.
This tubing cutter has a width of 3½ inch, a height of 1 inch, and a length of 2 inch, plus it weighs 0.33 pounds. The handle has a knob design. It features large knurled feed screw knob, lightweight slide and wheel housing, rollers include grooves, strong. In addition, it is made of steel, zinc. This tubing cutter is designed for: aluminum, copper.
This tubing cutter has a width of 3½ inch, a height of 1 inch, and a length of 2 inch, plus it weighs 0.33 pounds. The handle has a knob design. It features large knurled feed screw knob, lightweight slide and wheel housing, rollers include grooves, strong. In addition, it is made of steel, zinc. This tubing cutter is designed for: aluminum, copper.
This tubing cutter has a width of 6 inch, a height of 2 inch, and a length of 6½ inch, plus it weighs 0.88 pounds. The handle has a knob design. It features contoured frame, ergonomic knob, six individual bearings. In addition, it is made of steel, aluminum. This tubing cutter is designed for: stainless steel and includes x-cel knob.
This tubing cutter has a width of 6 inch, a height of 2 inch, and a length of 6½ inch, plus it weighs 0.88 pounds. The handle has a knob design. It features contoured frame, ergonomic knob, six individual bearings. In addition, it is made of steel, aluminum. This tubing cutter is designed for: stainless steel and includes x-cel knob.
Tubing and conduit cutters. Clean, square cuts are easily made on copper, brass, aluminum and thin-wall conduit. Now includes X-CEL knob for quicker cutting. Spare wheel included in knob. Capacity: 3/16 - 1-1/8 inches. Screw feed with standard wheel.
Tubing and conduit cutters. Clean, square cuts are easily made on copper, brass, aluminum and thin-wall conduit. Now includes X-CEL knob for quicker cutting. Spare wheel included in knob. Capacity: 3/16 - 1-1/8 inches. Screw feed with standard wheel.
Durable aluminum construction for heavy-duty use. Ergonomic grips on bottom handle are spaced at 1/2 inch increments to act as a quick pipe measuring scale. Easy turn-thumb latch for reliable storage. X-CEL(TM) quick change blade. Large 1-5/8 (42mm) O.D. capacity.
Durable aluminum construction for heavy-duty use. Ergonomic grips on bottom handle are spaced at 1/2 inch increments to act as a quick pipe measuring scale. Easy turn-thumb latch for reliable storage. X-CEL(TM) quick change blade. Large 1-5/8 (42mm) O.D. capacity.
This tubing cutter has a width of 1 inch, a height of 1½ inch, and a length of 3 inch. It features spring maintains the cutter in the closed position. In addition, it is made of plastic, and is not tether ready. This tubing cutter is designed for: nylon, polyethylene, polyurethane, PVC.
This tubing cutter has a width of 1 inch, a height of 1½ inch, and a length of 3 inch. It features spring maintains the cutter in the closed position. In addition, it is made of plastic, and is not tether ready. This tubing cutter is designed for: nylon, polyethylene, polyurethane, PVC.
This tubing cutter has a width of 1 inch, a height of 1½ inch, and a length of 3 inch. It features for PVC, braided PVC, nylon, polyethylene and polyurethane tubing. In addition, it is made of plastic, and is not tether ready. This tubing cutter is designed for: nylon, polyethylene, polyurethane, PVC.
This tubing cutter has a width of 1 inch, a height of 1½ inch, and a length of 3 inch. It features for PVC, braided PVC, nylon, polyethylene and polyurethane tubing. In addition, it is made of plastic, and is not tether ready. This tubing cutter is designed for: nylon, polyethylene, polyurethane, PVC.
This tubing cutter has a width of 92 mm, a height of 202 mm, and a length of 8½ inch. In addition, it is made of steel, aluminum, and is not tether ready. This tubing cutter is designed for: cPVC, pex, polybutylene, polyethylene, PVC.
This tubing cutter has a width of 92 mm, a height of 202 mm, and a length of 8½ inch. In addition, it is made of steel, aluminum, and is not tether ready. This tubing cutter is designed for: cPVC, pex, polybutylene, polyethylene, PVC.
This tubing cutter has a length of 5½ inch. The handle has a contoured design. It features comfort grip, contoured shape, fold-out reamer, full-size, storage space in handle. In addition, it is made of steel, steel. This tubing cutter is designed for: aluminum, brass, copper, stainless steel.
This tubing cutter has a length of 5½ inch. The handle has a contoured design. It features comfort grip, contoured shape, fold-out reamer, full-size, storage space in handle. In addition, it is made of steel, steel. This tubing cutter is designed for: aluminum, brass, copper, stainless steel.
This tubing cutter has a length of 3 inch, plus it weighs 0.7 pounds. Along with a steel handle, it features designed to cut glass tube and brittle tubular materials, replaceable chain, squeeze and pop and more. In addition, it is made of steel, steel. This tubing cutter is designed for: glass.
This tubing cutter has a length of 3 inch, plus it weighs 0.7 pounds. Along with a steel handle, it features designed to cut glass tube and brittle tubular materials, replaceable chain, squeeze and pop and more. In addition, it is made of steel, steel. This tubing cutter is designed for: glass.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
