Product ITEM is unavailable. See products from the same category below.
PAPR Lenses, Lens Covers & Protective Plates
PAPR (powered air-purifying respirator) lenses and plates fit into PAPR headgear and hoods. Protection plates attach to the headgear to hold lenses. Lenses protect the eyes and face are replaced when they become worn, damaged, or affect visibility. Lens plates PAPR lens covers attach to a lens to protect it from damage. Lens covers are removed and replaced as needed.
This 6000-series lens frame kit is made of durable plastic resin and comes in black. It is suitable for use with 6000-series full-face respirators. Ths multi-purpose kit is used to secure the lens assembly to the facepiece and can extend the service life of the facepiece.
This 6000-series lens frame kit is made of durable plastic resin and comes in black. It is suitable for use with 6000-series full-face respirators. Ths multi-purpose kit is used to secure the lens assembly to the facepiece and can extend the service life of the facepiece.
This Versaflo small/medium peel-off visor cover comes in clear. The side visor cover measures 7 width x 12 inches height and is suitable for use with integrated harness products/600/800 S-series. There are 10 visor covers in a box.
This Versaflo small/medium peel-off visor cover comes in clear. The side visor cover measures 7 width x 12 inches height and is suitable for use with integrated harness products/600/800 S-series. There are 10 visor covers in a box.
This Speedglas 3.0X magnification plate measures 4 1/4 inches length and can be inserted 9100 ADF on the inside slot. It is for use with 9100 series welding helmets.
This Speedglas 3.0X magnification plate measures 4 1/4 inches length and can be inserted 9100 ADF on the inside slot. It is for use with 9100 series welding helmets.
This FF-400-series lens frame assembly is made of plastic and comes in black. It includes a screw, nut, and identification plate. The lens frame assembly is suitable for use with Ultimate FX full-facepiece reusable respirators and there is one assembly in a bag.
This FF-400-series lens frame assembly is made of plastic and comes in black. It includes a screw, nut, and identification plate. The lens frame assembly is suitable for use with Ultimate FX full-facepiece reusable respirators and there is one assembly in a bag.
This FF-400-series lens cover has adhesive locations on the sides, is made of polyester film, and comes in white. It measures 12 7/10 width x 6 2/5 inches height. The lens is suitable for use with FF-400 Ultimate FX full-facepiece respirator. There are 25 covers in a pack.
This FF-400-series lens cover has adhesive locations on the sides, is made of polyester film, and comes in white. It measures 12 7/10 width x 6 2/5 inches height. The lens is suitable for use with FF-400 Ultimate FX full-facepiece respirator. There are 25 covers in a pack.
This Speedglas replacement front panel is made of chrome and comes in grey. It has a faceshield headgear and is suitable for use with Speedglas 9100 MP/9100-air/9100 FX-air welding helmets.
This Speedglas replacement front panel is made of chrome and comes in grey. It has a faceshield headgear and is suitable for use with Speedglas 9100 MP/9100-air/9100 FX-air welding helmets.
This Speedglas 9100 scratch-resistant outside protection plate is made of polycarbonate and is designed for use with Speedglas 9100MP welding helmets. There are 50 plates in a case.
This Speedglas 9100 scratch-resistant outside protection plate is made of polycarbonate and is designed for use with Speedglas 9100MP welding helmets. There are 50 plates in a case.
This Speedglas standard outer protection plate is made of polycarbonate and is designed for use with Speedglas 9000/Flexview/Utility welding helmets. There are 10 plates in a pack.
This Speedglas standard outer protection plate is made of polycarbonate and is designed for use with Speedglas 9000/Flexview/Utility welding helmets. There are 10 plates in a pack.
This Speedglas 9100X welding auto-darkening filter measures 4 1/4 width x 2 1/8 inches height and has variable shades 5 and 8 to 13. It includes CR2032 and is designed for use with Speedglas welding helmet 9100.
This Speedglas 9100X welding auto-darkening filter measures 4 1/4 width x 2 1/8 inches height and has variable shades 5 and 8 to 13. It includes CR2032 and is designed for use with Speedglas welding helmet 9100.
Ce couvre-visière détachable Versaflo est transparent. Le couvre-visière latéral mesure 7 po de largeur x 13 1/8 po de hauteur et est destiné à être utilisé avec les cagoules S-600/S-700/S-800. Un paquet contient dix couvre-visières.
Ce couvre-visière détachable Versaflo est transparent. Le couvre-visière latéral mesure 7 po de largeur x 13 1/8 po de hauteur et est destiné à être utilisé avec les cagoules S-600/S-700/S-800. Un paquet contient dix couvre-visières.
This Speedglas 9100XX welding auto-darkening filter measures 4 1/4 width x 2 3/4 inches height and has variable shades 5 and 8 to 13. It includes CR2032 and is designed for use with Speedglas welding helmet 9100. The filter meets the NIOSH standard.
This Speedglas 9100XX welding auto-darkening filter measures 4 1/4 width x 2 3/4 inches height and has variable shades 5 and 8 to 13. It includes CR2032 and is designed for use with Speedglas welding helmet 9100. The filter meets the NIOSH standard.
This clear, disposable faceshield cover is made of polyester film. It is for use with a 6000 series full facepiece reusable respirator. There are 25 covers in a pack.
This clear, disposable faceshield cover is made of polyester film. It is for use with a 6000 series full facepiece reusable respirator. There are 25 covers in a pack.
This Versaflo M-series replacement visor gasket comes in black and meets the NIOSH standard. It is suitable for use with Versaflo M-400-series helmets of a powered air-purifying respirator. There are five gaskets in a case.
This Versaflo M-series replacement visor gasket comes in black and meets the NIOSH standard. It is suitable for use with Versaflo M-400-series helmets of a powered air-purifying respirator. There are five gaskets in a case.
This Versaflo replacement visor pivot kit comes with a headcover. It meets the NIOSH standard and includes an ionizer, mounting bracket, and three feet wall transformer cables. The kit is suitable for use with Versaflo M-series products. There is one kit in a case.
This Versaflo replacement visor pivot kit comes with a headcover. It meets the NIOSH standard and includes an ionizer, mounting bracket, and three feet wall transformer cables. The kit is suitable for use with Versaflo M-series products. There is one kit in a case.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
