Skip to Content Skip to Navigation
!
Browser upgrade recommended: Improve your Grainger.ca experience by upgrading your browser to Edge or Chrome. Learn more about our supported browsers.
Back to Top
Filter

Filter Results By

Applied Filters
Clear All

Search within these results

GO
Shop By
Brand
  • View more View less
Price
  • View more View less
Handle Shape
Measurement Type
Tip Size
Grip Style
Overall Length
Bolt Clearance
Insulated ?
Suggested results for "SUGGEST-ITEM"
Product ITEM is unavailable. See products from the same category below.

Nut Drivers

Nut drivers look similar to a screwdriver, but have a socket attached to a shaft with an attached handle to turn the tool for tightening or loosening nuts and bolts in low-torque applications. These manual tools have sockets that fit around and grip around the entire head of the fastener for a secure fit. They provide more contact to the fastener head than an open-end wrench so the socket is less likely to slip off the fastener when the nut driver is turned. Nut drivers generally have a hollow shaft that allows a threaded bolt to pass through so the tool can turn fasteners on long threaded bolts. They are used for low torque use such as appliance repair and electronics applications.

https://catalogue.grainger.ca/?hybris=true

46 Results Found

In stock at branch(0)
Branch #
Change
Find a Branch
Results per page :  16 | 32 | 48
SOLID ROUND SHANK PRECISIONNUT DRIVER, 3/16 IN TIP SIZE, 6 IN OVERALL L, 2 13/32 IN SHANK L
  • WIHA TOOLS
  • SOLID ROUND SHANK PRECISIONNUT DRIVER, 3/16 IN TIP SIZE, 6 IN OVERALL L, 2 13/32 IN SHANK L
  • Item # WWG30D426
  • Mfr. Model # 26547
  • EHC: EHC :

  • This nut driver has a length of 6 inches and is not insulated. The plastic handle is black and has a straight shape, and a moulded style/type. It meets the standards for HRC 61-65. In addition, it has a SAE measurement type, is corrosion-resistant, has a chrome finish, plus it is not non-sparking, is non-magnetic, and is not tether ready with a tapered grip. This nut driver includes one piece.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price If you have a User ID, sign in to view your account pricing. Your price may be different from the price displayed. : $10.25 / EACH

EHC: EHC :
SOLID ROUND SHANK NUT DRIVER, 14 MM TIP SIZE, 9½ IN OVERALL L, 5/16 IN BOLT CLEARANCE
  • WIHA TOOLS
  • SOLID ROUND SHANK NUT DRIVER, 14 MM TIP SIZE, 9½ IN OVERALL L, 5/16 IN BOLT CLEARANCE
  • Item # WWG53KG51
  • Mfr. Model # 32238
  • EHC: EHC :

  • This nut driver has a length of 9½ inches and is insulated. The multicomponent handle is red/yellow and has a straight shape, and a moulded style/type. It meets the standards for ASTM F1505, IEC 900, ISO, NFPA 70E, VDE 0680. In addition, it has a metric measurement type, is corrosion-resistant, has a insulated finish, plus it is not non-sparking, is non-magnetic, and is not tether ready with an insulated grip. This nut driver includes one piece.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price If you have a User ID, sign in to view your account pricing. Your price may be different from the price displayed. : $32.40 / EACH

EHC: EHC :
SOLID ROUND SHANK NUT DRIVER, 12 MM TIP SIZE, 9½ IN OVERALL L, 5/16 IN BOLT CLEARANCE
  • WIHA TOOLS
  • SOLID ROUND SHANK NUT DRIVER, 12 MM TIP SIZE, 9½ IN OVERALL L, 5/16 IN BOLT CLEARANCE
  • Item # WWG53KG50
  • Mfr. Model # 32233
  • EHC: EHC :

  • This nut driver has a length of 9½ inches and is insulated. The multicomponent handle is red/yellow and has a straight shape, and a moulded style/type. It meets the standards for ASTM F1505, IEC 900, ISO, NFPA 70E, VDE 0680. In addition, it has a metric measurement type, is corrosion-resistant, plus it is not non-sparking, is non-magnetic, and is not tether ready with an insulated grip. This nut driver includes one piece.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price If you have a User ID, sign in to view your account pricing. Your price may be different from the price displayed. : $31.13 / EACH

EHC: EHC :
SOLID ROUND SHANK NUT DRIVER, 17 MM TIP SIZE, 9½ IN OVERALL L, 5/16 IN BOLT CLEARANCE
  • WIHA TOOLS
  • SOLID ROUND SHANK NUT DRIVER, 17 MM TIP SIZE, 9½ IN OVERALL L, 5/16 IN BOLT CLEARANCE
  • Item # WWG53KG54
  • Mfr. Model # 32241
  • EHC: EHC :

  • This nut driver has a length of 9½ inches and is insulated. The multicomponent handle is red/yellow and has a straight shape, and a moulded style/type. It meets the standards for ASTM F1505, IEC 900, ISO, NFPA 70E, VDE 0680. In addition, it has a metric measurement type, is corrosion-resistant, plus it is not non-sparking, is non-magnetic, and is not tether ready with an insulated grip. This nut driver includes one piece.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price If you have a User ID, sign in to view your account pricing. Your price may be different from the price displayed. : $40.73 / EACH

EHC: EHC :
HOLLOW ROUND SHANK NUT DRIVER, 17 MM TIP SIZE, 10¼ IN OVERALL L, 5/16 IN BOLT CLEARANCE
  • WIHA TOOLS
  • HOLLOW ROUND SHANK NUT DRIVER, 17 MM TIP SIZE, 10¼ IN OVERALL L, 5/16 IN BOLT CLEARANCE
  • Item # WWG53KH07
  • Mfr. Model # 33641
  • EHC: EHC :

  • This nut driver has a length of 10¼ inches and is insulated. The multicomponent handle is red and has a t-shaped shape, and a moulded style/type. It meets the standards for ASTM, CSA, EN/IEC NFPA70E, VDE. In addition, it has a metric measurement type, is corrosion-resistant, plus it is not non-sparking, is non-magnetic, and is not tether ready. This nut driver includes one piece.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price If you have a User ID, sign in to view your account pricing. Your price may be different from the price displayed. : $65.34 / EACH

EHC: EHC :
SOLID ROUND SHANK PRECISIONNUT DRIVER, 4.5 MM TIP SIZE, 6 IN OVERALL L, 2 13/32 IN SHANK L
  • WIHA TOOLS
  • SOLID ROUND SHANK PRECISIONNUT DRIVER, 4.5 MM TIP SIZE, 6 IN OVERALL L, 2 13/32 IN SHANK L
  • Item # WWG30D425
  • Mfr. Model # 26545
  • EHC: EHC :

  • This nut driver has a length of 6 inches and is not insulated. The plastic handle is black and has a straight shape, and a moulded style/type. It meets the standards for HRC 61-65. In addition, it has a metric measurement type, is corrosion-resistant, has a chrome finish, plus it is not non-sparking, is non-magnetic, and is not tether ready with a tapered grip. This nut driver includes one piece.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price If you have a User ID, sign in to view your account pricing. Your price may be different from the price displayed. : $9.82 / EACH

EHC: EHC :
SOLID ROUND SHANK PRECISIONNUT DRIVER, 7/32 IN TIP SIZE, 6½ IN OVERALL L, TAPERED GRIP
  • WIHA TOOLS
  • SOLID ROUND SHANK PRECISIONNUT DRIVER, 7/32 IN TIP SIZE, 6½ IN OVERALL L, TAPERED GRIP
  • Item # WWG30D429
  • Mfr. Model # 26556
  • EHC: EHC :

  • This nut driver has a length of 6½ inches and is not insulated. The plastic handle is black and has a straight shape, and a moulded style/type. It meets the standards for HRC 61-65. In addition, it has a SAE measurement type, is corrosion-resistant, has a chrome finish, plus it is not non-sparking, is non-magnetic, and is not tether ready with a tapered grip. This nut driver includes one piece.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price If you have a User ID, sign in to view your account pricing. Your price may be different from the price displayed. : $10.49 / EACH

EHC: EHC :
SOLID ROUND SHANK PRECISIONNUT DRIVER, 3/32 IN TIP SIZE, 6 IN OVERALL L, 2 13/32 IN SHANK L
  • WIHA TOOLS
  • SOLID ROUND SHANK PRECISIONNUT DRIVER, 3/32 IN TIP SIZE, 6 IN OVERALL L, 2 13/32 IN SHANK L
  • Item # WWG30D415
  • Mfr. Model # 26523
  • EHC: EHC :

  • This nut driver has a length of 6 inches and is not insulated. The plastic handle is black and has a straight shape, and a moulded style/type. It meets the standards for HRC 61-65. In addition, it has a SAE measurement type, is corrosion-resistant, has a chrome finish, plus it is not non-sparking, is non-magnetic, and is not tether ready with a tapered grip. This nut driver includes one piece.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price If you have a User ID, sign in to view your account pricing. Your price may be different from the price displayed. : $8.72 / EACH

EHC: EHC :
SOLID ROUND SHANK NUT DRIVER, 10 MM TIP SIZE, 9½ IN OVERALL L, 5/16 IN BOLT CLEARANCE
  • WIHA TOOLS
  • SOLID ROUND SHANK NUT DRIVER, 10 MM TIP SIZE, 9½ IN OVERALL L, 5/16 IN BOLT CLEARANCE
  • Item # WWG1YUL3
  • Mfr. Model # 32227
  • EHC: EHC :

  • This nut driver has a length of 9½ inches and is insulated. The multicomponent handle is red/yellow and has a straight shape, and a moulded style/type. It meets the standards for ASTM F1505, IEC 900, ISO, NFPA 70E, VDE 0680. In addition, it has a metric measurement type, is corrosion-resistant, plus it is not non-sparking, is non-magnetic, and is not tether ready with an insulated grip. This nut driver includes one piece.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price If you have a User ID, sign in to view your account pricing. Your price may be different from the price displayed. : $25.83 / EACH

EHC: EHC :
SOLID ROUND SHANK NUT DRIVER, 5.5 MM TIP SIZE, 9¼ IN OVERALL L, 5/16 IN BOLT CLEARANCE
  • WIHA TOOLS
  • SOLID ROUND SHANK NUT DRIVER, 5.5 MM TIP SIZE, 9¼ IN OVERALL L, 5/16 IN BOLT CLEARANCE
  • Item # WWG1YUH7
  • Mfr. Model # 32212
  • EHC: EHC :

  • This nut driver has a length of 9¼ inches and is insulated. The multicomponent handle is red/yellow and has a straight shape, and a moulded style/type. It meets the standards for ASTM F1505, IEC 900, ISO, NFPA 70E, VDE 0680. In addition, it has a metric measurement type, is corrosion-resistant, plus it is not non-sparking, is non-magnetic, and is not tether ready with an insulated grip. This nut driver includes one piece.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price If you have a User ID, sign in to view your account pricing. Your price may be different from the price displayed. : $13.32 / EACH

EHC: EHC :
SOLID ROUND SHANK PRECISIONNUT DRIVER, 5/32 IN TIP SIZE, 6 IN OVERALL L, 2 13/32 IN SHANK L
  • WIHA TOOLS
  • SOLID ROUND SHANK PRECISIONNUT DRIVER, 5/32 IN TIP SIZE, 6 IN OVERALL L, 2 13/32 IN SHANK L
  • Item # WWG30D423
  • Mfr. Model # 26539
  • EHC: EHC :

  • This nut driver has a length of 6 inches and is not insulated. The plastic handle is black and has a straight shape, and a moulded style/type. It meets the standards for HRC 61-65. In addition, it has a SAE measurement type, is corrosion-resistant, has a chrome finish, plus it is not non-sparking, is non-magnetic, and is not tether ready with a tapered grip. This nut driver includes one piece.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price If you have a User ID, sign in to view your account pricing. Your price may be different from the price displayed. : $9.82 / EACH

EHC: EHC :
SOLID ROUND SHANK NUT DRIVER, ⅛ IN TIP SIZE, 6 IN OVERALL L, 5/16 IN BOLT CLEARANCE, SAE
  • WIHA TOOLS
  • SOLID ROUND SHANK NUT DRIVER, ⅛ IN TIP SIZE, 6 IN OVERALL L, 5/16 IN BOLT CLEARANCE, SAE
  • Item # WWG30D419
  • Mfr. Model # 26531
  • EHC: EHC :

  • This nut driver has a length of 6 inches and is not insulated. The plastic handle is black and has a straight shape, and a moulded style/type. It meets the standards for HRC 61-65. In addition, it has a SAE measurement type, is corrosion-resistant, has a chrome finish, plus it is not non-sparking, is non-magnetic, and is not tether ready with a tapered grip. This nut driver includes one piece.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price If you have a User ID, sign in to view your account pricing. Your price may be different from the price displayed. : $9.22 / EACH

EHC: EHC :
SOLID ROUND SHANK PRECISIONNUT DRIVER, 3.5 MM TIP SIZE, 6 IN OVERALL L, 2 13/32 IN SHANK L
  • WIHA TOOLS
  • SOLID ROUND SHANK PRECISIONNUT DRIVER, 3.5 MM TIP SIZE, 6 IN OVERALL L, 2 13/32 IN SHANK L
  • Item # WWG30D421
  • Mfr. Model # 26535
  • EHC: EHC :

  • This nut driver has a length of 6 inches and is not insulated. The plastic handle is black and has a straight shape, and a moulded style/type. It meets the standards for HRC 61-65. In addition, it has a metric measurement type, is corrosion-resistant, has a chrome finish, plus it is not non-sparking, is non-magnetic, and is not tether ready with a tapered grip. This nut driver includes one piece.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price If you have a User ID, sign in to view your account pricing. Your price may be different from the price displayed. : $8.66 / EACH

EHC: EHC :
SOLID ROUND SHANK PRECISIONNUT DRIVER, 4 MM TIP SIZE, 6 IN OVERALL L, 5/16 IN BOLT CLEARANCE
  • WIHA TOOLS
  • SOLID ROUND SHANK PRECISIONNUT DRIVER, 4 MM TIP SIZE, 6 IN OVERALL L, 5/16 IN BOLT CLEARANCE
  • Item # WWG30D424
  • Mfr. Model # 26540
  • EHC: EHC :

  • This nut driver has a length of 6 inches and is not insulated. The plastic handle is black and has a straight shape, and a moulded style/type. It meets the standards for HRC 61-65. In addition, it has a metric measurement type, is corrosion-resistant, has a chrome finish, plus it is not non-sparking, is non-magnetic, and is not tether ready with a tapered grip. This nut driver includes one piece.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price If you have a User ID, sign in to view your account pricing. Your price may be different from the price displayed. : $10.05 / EACH

EHC: EHC :
SOLID ROUND SHANK NUT DRIVER, 7/16 IN TIP SIZE, 9½ IN OVERALL L, 5/16 IN BOLT CLEARANCE
  • WIHA TOOLS
  • SOLID ROUND SHANK NUT DRIVER, 7/16 IN TIP SIZE, 9½ IN OVERALL L, 5/16 IN BOLT CLEARANCE
  • Item # WWG1YUH2
  • Mfr. Model # 32273
  • EHC: EHC :

  • This nut driver has a length of 9½ inches and is insulated. The multicomponent handle is red/yellow and has a straight shape, and a moulded style/type. It meets the standards for ASTM F1505, IEC 900, ISO, NFPA 70E, VDE 0680. In addition, it has a SAE measurement type, is corrosion-resistant, plus it is not non-sparking, is non-magnetic, and is not tether ready with an insulated grip. This nut driver includes one piece.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price If you have a User ID, sign in to view your account pricing. Your price may be different from the price displayed. : $19.55 / EACH

EHC: EHC :
SOLID ROUND SHANK PRECISIONNUT DRIVER, 7/64 IN TIP SIZE, 6 IN OVERALL L, 2 13/32 IN SHANK L
  • WIHA TOOLS
  • SOLID ROUND SHANK PRECISIONNUT DRIVER, 7/64 IN TIP SIZE, 6 IN OVERALL L, 2 13/32 IN SHANK L
  • Item # WWG30D417
  • Mfr. Model # 26527
  • EHC: EHC :

  • This nut driver has a length of 6 inches and is not insulated. The plastic handle is black and has a straight shape, and a moulded style/type. It meets the standards for HRC 61-65. In addition, it has a SAE measurement type, is corrosion-resistant, has a chrome finish, plus it is not non-sparking, is non-magnetic, and is not tether ready with a tapered grip. This nut driver includes one piece.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price If you have a User ID, sign in to view your account pricing. Your price may be different from the price displayed. : $9.00 / EACH

EHC: EHC :
Results per page :  16 | 32 | 48

Add to Order List

X

Your items were added

Your items were added to some lists

Max quantity exceeded. The item could not be added to the following List(s)

No Existing List Found. Please Create New List below.

Your list has been created

Please select a list