Insulated tools have a nonconductive coating or cover to reduce the risk of electrical arcing and protect against electrical shock from accidental contact with live circuits.
Product ITEM is unavailable. See products from the same category below.
Nut Drivers
Nut drivers look similar to a screwdriver, but have a socket attached to a shaft with an attached handle to turn the tool for tightening or loosening nuts and bolts in low-torque applications. These manual tools have sockets that fit around and grip around the entire head of the fastener for a secure fit. They provide more contact to the fastener head than an open-end wrench so the socket is less likely to slip off the fastener when the nut driver is turned. Nut drivers generally have a hollow shaft that allows a threaded bolt to pass through so the tool can turn fasteners on long threaded bolts. They are used for low torque use such as appliance repair and electronics applications.
This nut driver has a length of 9 inches and is insulated. The multicomponent handle is red/yellow and has a straight shape, and a moulded style/type. It meets the standards for IEC 60901. In addition, it has a SAE measurement type, is not corrosion-resistant, has a zinc phosphate-plated finish, plus it is not non-sparking, is non-magnetic, and is not tether ready with an ergonomic grip. This nut driver includes one piece.
This nut driver has a length of 9 inches and is insulated. The multicomponent handle is red/yellow and has a straight shape, and a moulded style/type. It meets the standards for IEC 60901. In addition, it has a SAE measurement type, is not corrosion-resistant, has a zinc phosphate-plated finish, plus it is not non-sparking, is non-magnetic, and is not tether ready with an ergonomic grip. This nut driver includes one piece.
This nut driver has a length of 7.56 and is not insulated. The handle is black/green and has a kraftform shape, a ergonomic, kraftform style/type. In addition, it has a SAE measurement type. This nut driver includes one piece.
This nut driver has a length of 7.56 and is not insulated. The handle is black/green and has a kraftform shape, a ergonomic, kraftform style/type. In addition, it has a SAE measurement type. This nut driver includes one piece.
This nut driver has a length of 7.56 and is not insulated. The handle is black/green and has a kraftform shape, a ergonomic, kraftform style/type. In addition, it has a SAE measurement type. This nut driver includes one piece.
This nut driver has a length of 7.56 and is not insulated. The handle is black/green and has a kraftform shape, a ergonomic, kraftform style/type. In addition, it has a SAE measurement type. This nut driver includes one piece.
This nut driver has a length of 9 inches and is insulated. The multicomponent handle is red/yellow and has a straight shape, and a moulded style/type. It meets the standards for IEC 60903. In addition, it has a SAE measurement type, is not corrosion-resistant, has a zinc phosphate-plated finish, plus it is not non-sparking, is non-magnetic, and is not tether ready with an ergonomic grip. This nut driver includes one piece.
This nut driver has a length of 9 inches and is insulated. The multicomponent handle is red/yellow and has a straight shape, and a moulded style/type. It meets the standards for IEC 60903. In addition, it has a SAE measurement type, is not corrosion-resistant, has a zinc phosphate-plated finish, plus it is not non-sparking, is non-magnetic, and is not tether ready with an ergonomic grip. This nut driver includes one piece.
This nut driver has a length of 7.56 and is not insulated. The handle is black/green and has a kraftform shape, a ergonomic, kraftform style/type. In addition, it has a SAE measurement type. This nut driver includes one piece.
This nut driver has a length of 7.56 and is not insulated. The handle is black/green and has a kraftform shape, a ergonomic, kraftform style/type. In addition, it has a SAE measurement type. This nut driver includes one piece.
This nut driver has a length of 9.33 and is not insulated. The handle is black/green and has a kraftform shape, a ergonomic, kraftform style/type. In addition, it has a metric measurement type. This nut driver includes one piece.
This nut driver has a length of 9.33 and is not insulated. The handle is black/green and has a kraftform shape, a ergonomic, kraftform style/type. In addition, it has a metric measurement type. This nut driver includes one piece.
This nut driver has a length of 7.56 and is not insulated. The handle is black/green and has a kraftform shape, a ergonomic, kraftform style/type. In addition, it has a metric measurement type. This nut driver includes one piece.
This nut driver has a length of 7.56 and is not insulated. The handle is black/green and has a kraftform shape, a ergonomic, kraftform style/type. In addition, it has a metric measurement type. This nut driver includes one piece.
This nut driver has a length of 7.28 and is not insulated. The handle is black/green and has a kraftform shape, a ergonomic, kraftform style/type. In addition, it has a SAE measurement type. This nut driver includes one piece.
This nut driver has a length of 7.28 and is not insulated. The handle is black/green and has a kraftform shape, a ergonomic, kraftform style/type. In addition, it has a SAE measurement type. This nut driver includes one piece.
This nut driver has a length of 9 inches and is insulated. The multicomponent handle is red/yellow and has a straight shape, and a moulded style/type. It meets the standards for IEC 60902. In addition, it has a SAE measurement type, is not corrosion-resistant, has a zinc phosphate-plated finish, plus it is not non-sparking, is non-magnetic, and is not tether ready with an ergonomic grip. This nut driver includes one piece.
This nut driver has a length of 9 inches and is insulated. The multicomponent handle is red/yellow and has a straight shape, and a moulded style/type. It meets the standards for IEC 60902. In addition, it has a SAE measurement type, is not corrosion-resistant, has a zinc phosphate-plated finish, plus it is not non-sparking, is non-magnetic, and is not tether ready with an ergonomic grip. This nut driver includes one piece.
This nut driver has a length of 9¼ inches and is insulated. The multicomponent handle is red/yellow and has a straight shape, and a moulded style/type. It meets the standards for IEC 60905. In addition, it has a SAE measurement type, is not corrosion-resistant, has a zinc phosphate-plated finish, plus it is not non-sparking, is non-magnetic, and is not tether ready with an ergonomic grip. This nut driver includes one piece.
This nut driver has a length of 9¼ inches and is insulated. The multicomponent handle is red/yellow and has a straight shape, and a moulded style/type. It meets the standards for IEC 60905. In addition, it has a SAE measurement type, is not corrosion-resistant, has a zinc phosphate-plated finish, plus it is not non-sparking, is non-magnetic, and is not tether ready with an ergonomic grip. This nut driver includes one piece.
This nut driver has a length of 195 mm and is not insulated. The handle has a ergonomic, kraftform style/type. In addition, it has a SAE measurement type, has a chrome finish, plus it is not non-sparking. This nut driver includes one piece.
This nut driver has a length of 195 mm and is not insulated. The handle has a ergonomic, kraftform style/type. In addition, it has a SAE measurement type, has a chrome finish, plus it is not non-sparking. This nut driver includes one piece.
This nut driver has a length of 6.61 and is not insulated. The handle is black/green and has a kraftform shape, a ergonomic, kraftform style/type. In addition, it has a metric measurement type. This nut driver includes one piece.
This nut driver has a length of 6.61 and is not insulated. The handle is black/green and has a kraftform shape, a ergonomic, kraftform style/type. In addition, it has a metric measurement type. This nut driver includes one piece.
This nut driver has a length of 6.61 and is not insulated. The handle is black/green and has a kraftform shape, a ergonomic, kraftform style/type. In addition, it has a SAE measurement type. This nut driver includes one piece.
This nut driver has a length of 6.61 and is not insulated. The handle is black/green and has a kraftform shape, a ergonomic, kraftform style/type. In addition, it has a SAE measurement type. This nut driver includes one piece.
This nut driver has a length of 6.61 and is not insulated. The handle is black/green and has a kraftform shape, a ergonomic, kraftform style/type. In addition, it has a SAE measurement type. This nut driver includes one piece.
This nut driver has a length of 6.61 and is not insulated. The handle is black/green and has a kraftform shape, a ergonomic, kraftform style/type. In addition, it has a SAE measurement type. This nut driver includes one piece.
This nut driver has a length of 9 inches and is insulated. The multicomponent handle is red/yellow and has a straight shape, and a moulded style/type. It meets the standards for IEC 60904. In addition, it has a SAE measurement type, is not corrosion-resistant, has a zinc phosphate-plated finish, plus it is not non-sparking, is non-magnetic, and is not tether ready with an ergonomic grip. This nut driver includes one piece.
This nut driver has a length of 9 inches and is insulated. The multicomponent handle is red/yellow and has a straight shape, and a moulded style/type. It meets the standards for IEC 60904. In addition, it has a SAE measurement type, is not corrosion-resistant, has a zinc phosphate-plated finish, plus it is not non-sparking, is non-magnetic, and is not tether ready with an ergonomic grip. This nut driver includes one piece.
This nut driver has a length of 9¼ inches and is insulated. The multicomponent handle is red/yellow and has a straight shape, and a moulded style/type. It meets the standards for IEC 60906. In addition, it has a SAE measurement type, is not corrosion-resistant, has a zinc phosphate-plated finish, plus it is not non-sparking, is non-magnetic, and is not tether ready with an ergonomic grip. This nut driver includes one piece.
This nut driver has a length of 9¼ inches and is insulated. The multicomponent handle is red/yellow and has a straight shape, and a moulded style/type. It meets the standards for IEC 60906. In addition, it has a SAE measurement type, is not corrosion-resistant, has a zinc phosphate-plated finish, plus it is not non-sparking, is non-magnetic, and is not tether ready with an ergonomic grip. This nut driver includes one piece.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
