Insulated tools have a nonconductive coating or cover to reduce the risk of electrical arcing and protect against electrical shock from accidental contact with live circuits.
Fastener HoldingFastener-holding drivers have a mechanism that holds fasteners during installation to help prevent them from being dropped.
Suggested results for "SUGGEST-ITEM"
Product ITEM is unavailable. See products from the same category below.
Nut Driver Sets
Nut drivers look similar to a screwdriver, but have a socket attached to a shaft with an attached handle to turn the tool for tightening or loosening nuts and bolts. The socket fits around and grips around the entire head of the fastener for a secure fit. They provide more contact to the fastener head than an open-end wrench, so the socket is less likely to slip off the fastener when the nut driver is turned. Nut drivers generally have a hollow shaft that allows a threaded bolt to pass through so the tool can turn fasteners on long threaded bolts. They are used for low torque applications compared to wrenches or ratchets that can generate more torque. Nut driver sets come with an assortment of nut drivers to fit a range of fastener head sizes.
This nut driver set has a length of 9¾ inch to 11⅜ inches and is insulated. The multicomponent handle is black/yellow and has a straight shape, a ergonomic style/type. It meets the standards for ASTM F1505-10, EN/IEC 60900:2012. In addition, it has a SAE measurement type, is corrosion-resistant, plus it is non-sparking, is non-magnetic, and is not tether ready with an ergonomic grip. This nut driver set includes nine pieces.
This nut driver set has a length of 9¾ inch to 11⅜ inches and is insulated. The multicomponent handle is black/yellow and has a straight shape, a ergonomic style/type. It meets the standards for ASTM F1505-10, EN/IEC 60900:2012. In addition, it has a SAE measurement type, is corrosion-resistant, plus it is non-sparking, is non-magnetic, and is not tether ready with an ergonomic grip. This nut driver set includes nine pieces.
This nut driver set is not insulated. The multicomponent handle is black/yellow and has a straight shape, a ergonomic style/type. It meets the standards for ANSI, ASME. In addition, it has a SAE measurement type, is corrosion-resistant, plus it is non-sparking, is not non-magnetic, and is not tether ready with an ergonomic grip. This nut driver set includes seven pieces.
This nut driver set is not insulated. The multicomponent handle is black/yellow and has a straight shape, a ergonomic style/type. It meets the standards for ANSI, ASME. In addition, it has a SAE measurement type, is corrosion-resistant, plus it is non-sparking, is not non-magnetic, and is not tether ready with an ergonomic grip. This nut driver set includes seven pieces.
This nut driver set has a length of 9¾ inches and is not insulated. The multicomponent handle is black/yellow and has a straight shape, a ergonomic style/type. It meets the standards for ANSI, ASME. In addition, it has a SAE measurement type, is corrosion-resistant, plus it is non-sparking, is not non-magnetic, and is not tether ready with an ergonomic grip. This nut driver set includes two pieces.
This nut driver set has a length of 9¾ inches and is not insulated. The multicomponent handle is black/yellow and has a straight shape, a ergonomic style/type. It meets the standards for ANSI, ASME. In addition, it has a SAE measurement type, is corrosion-resistant, plus it is non-sparking, is not non-magnetic, and is not tether ready with an ergonomic grip. This nut driver set includes two pieces.
This nut driver set has a length of 3½ inches and is not insulated. The multicomponent handle is black/yellow and has a straight shape, a ergonomic style/type. It meets the standards for ANSI, ASME. In addition, it has a SAE measurement type, is corrosion-resistant, plus it is non-sparking, is non-magnetic, and is not tether ready with an ergonomic grip. This nut driver set includes two pieces.
This nut driver set has a length of 3½ inches and is not insulated. The multicomponent handle is black/yellow and has a straight shape, a ergonomic style/type. It meets the standards for ANSI, ASME. In addition, it has a SAE measurement type, is corrosion-resistant, plus it is non-sparking, is non-magnetic, and is not tether ready with an ergonomic grip. This nut driver set includes two pieces.
This nut driver set has a length of 6¾ inches and is not insulated. The multicomponent handle is black/yellow and has a straight shape, a ergonomic style/type. It meets the standards for ANSI, ASME. In addition, it has a SAE measurement type, is corrosion-resistant, plus it is non-sparking, is not non-magnetic, and is not tether ready with an ergonomic grip. This nut driver set includes two pieces.
This nut driver set has a length of 6¾ inches and is not insulated. The multicomponent handle is black/yellow and has a straight shape, a ergonomic style/type. It meets the standards for ANSI, ASME. In addition, it has a SAE measurement type, is corrosion-resistant, plus it is non-sparking, is not non-magnetic, and is not tether ready with an ergonomic grip. This nut driver set includes two pieces.
This nut driver set has a length of 6¾ inches and is not insulated. The multicomponent handle is black/yellow and has a straight shape, a ergonomic style/type. It meets the standards for ANSI, ASME. In addition, it has a metric measurement type, is corrosion-resistant, plus it is non-sparking, is non-magnetic, and is not tether ready with an ergonomic grip. This nut driver set includes seven pieces.
This nut driver set has a length of 6¾ inches and is not insulated. The multicomponent handle is black/yellow and has a straight shape, a ergonomic style/type. It meets the standards for ANSI, ASME. In addition, it has a metric measurement type, is corrosion-resistant, plus it is non-sparking, is non-magnetic, and is not tether ready with an ergonomic grip. This nut driver set includes seven pieces.
7 piece cushion grip nut driver set with 6 inch shanks. Deluxe cushion-grip is designed for extra-long, dependable service and unbeatable comfort. Colour coded cap identifies Hex size.
7 piece cushion grip nut driver set with 6 inch shanks. Deluxe cushion-grip is designed for extra-long, dependable service and unbeatable comfort. Colour coded cap identifies Hex size.
7 piece cushion grip nut driver set with 3 inch shanks. Deluxe cushion-grip is designed for extra-long, dependable service and unbeatable comfort. Colour coded cap identifies Hex size.
7 piece cushion grip nut driver set with 3 inch shanks. Deluxe cushion-grip is designed for extra-long, dependable service and unbeatable comfort. Colour coded cap identifies Hex size.
This nut driver set has a length of 15¾ inches and is not insulated. The multicomponent handle is black/yellow and has a straight shape, a ergonomic style/type. It meets the standards for ANSI, ASME. In addition, it has a SAE measurement type, is corrosion-resistant, plus it is non-sparking, is not non-magnetic, and is not tether ready with an ergonomic grip. This nut driver set includes seven pieces.
This nut driver set has a length of 15¾ inches and is not insulated. The multicomponent handle is black/yellow and has a straight shape, a ergonomic style/type. It meets the standards for ANSI, ASME. In addition, it has a SAE measurement type, is corrosion-resistant, plus it is non-sparking, is not non-magnetic, and is not tether ready with an ergonomic grip. This nut driver set includes seven pieces.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
