Machining
Drilling & Holemaking
Drill Bits
Drill Bits for Metal & Plastic
Jobber-Length Drill Bits
Solid Carbide Jobber-Length Drill Bits
Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits
Close

Filter Results By

Applied Filters

Clear All

Brand
CLEVELAND

Search within these results

Brand

BOSCH BOSCH (14)
CLARKSON-OSBORN CLARKSON-OSBORN (20)
CLEVELAND CLEVELAND (115)
M.A. FORD M.A. FORD (1)
MONSTER MONSTER (118)
ONSRUD ONSRUD (2)
OSG (7)

SOWA (2)

WESTWARD (38)

WIDIA (511)

WIDIA PRODUCTS GROUP (28)

YG-1 TOOL COMPANY (2)
View more View less

Price

$35 - $40 $35 - $40 (1)
$40 - $50 $40 - $50 (23)
$50 - $60 $50 - $60 (17)
$60 - $70 $60 - $70 (13)
$70 - $80 $70 - $80 (8)
$80 - $90 $80 - $90 (6)
$90 - $100 (2)

$100 - $200 (31)

$200 - $300 (10)

$300 - $400 (4)
View more View less

Measurement System

Fractional Inch Fractional Inch (31)
Letter Letter (24)
Wire Wire (60)

Drill Bit Size

#1 #1 (1)
#2 #2 (1)
#3 #3 (1)
#4 #4 (1)
#5 #5 (1)
#6 #6 (1)
#7 (1)

#8 (1)

#9 (1)

#10 (1)

#11 (1)

#12 (1)

#13 (1)

#14 (1)

#15 (1)

#16 (1)

#17 (1)

#18 (1)

#19 (1)

#20 (1)

#21 (1)

#22 (1)

#23 (1)

#24 (1)

#25 (1)

#26 (1)

#27 (1)

#28 (1)

#29 (1)

#30 (1)

#31 (1)

#32 (1)

#33 (1)

#34 (1)

#35 (1)

#36 (1)

#37 (1)

#38 (1)

#39 (1)

#40 (1)

#41 (1)

#42 (1)

#43 (1)

#44 (1)

#45 (1)

#46 (1)

#47 (1)

#48 (1)

#49 (1)

#50 (1)

#51 (1)

#52 (1)

#53 (1)

#54 (1)

#55 (1)

#56 (1)

#57 (1)

#58 (1)

#59 (1)

#60 (1)

1/32 in (1)

3/64 in (1)

1/16 in (1)

5/64 in (1)

3/32 in (1)

7/64 in (1)

1/8 in (1)

9/64 in (1)

5/32 in (1)

11/64 in (1)

3/16 in (1)

13/64 in (1)

7/32 in (1)

15/64 in (1)

1/4 in (1)

17/64 in (1)

9/32 in (1)

19/64 in (1)

5/16 in (1)

21/64 in (1)

11/32 in (1)

23/64 in (1)

3/8 in (1)

25/64 in (1)

13/32 in (1)

27/64 in (1)

7/16 in (1)

29/64 in (1)

15/32 in (1)

31/64 in (1)

1/2 in (1)

A (1)

B (1)

C (1)

D (1)

F (1)

G (1)

H (1)

I (1)

J (1)

K (1)

L (1)

M (1)

N (1)

O (1)

P (1)

Q (1)

S (1)

T (1)

U (1)

V (1)

W (1)

X (1)

Y (1)

Z (1)
View more View less

Decimal Equivalent

0.0595 0.0595 (1)
0.0625 0.0625 (1)
0.07 0.07 (1)
0.0938 0.0938 (1)
0.098 0.098 (1)
0.1094 0.1094 (1)
0.125 (1)

0.1285 (1)

0.1406 (1)

0.144 (1)

0.1563 (1)

0.1719 (1)

0.1875 (1)

0.1935 (1)

0.201 (1)

0.204 (1)

0.2188 (1)

0.25 (1)

0.3125 (1)

0.375 (1)

0.4375 (1)

0.5 (1)

0.0313 in (1)

0.04 in (1)

0.041 in (1)

0.042 in (1)

0.043 in (1)

0.0465 in (1)

0.0469 in (1)

0.052 in (1)

0.055 in (1)

0.0635 in (1)

0.067 in (1)

0.073 in (1)

0.076 in (1)

0.0781 in (1)

0.0785 in (1)

0.081 in (1)

0.082 in (1)

0.086 in (1)

0.089 in (1)

0.0935 in (1)

0.096 in (1)

0.0995 in (1)

0.1015 in (1)

0.104 in (1)

0.1065 in (1)

0.11 in (1)

0.111 in (1)

0.113 in (1)

0.116 in (1)

0.12 in (1)

0.136 in (1)

0.1405 in (1)

0.147 in (1)

0.1495 in (1)

0.152 in (1)

0.154 in (1)

0.157 in (1)

0.159 in (1)

0.161 in (1)

0.166 in (1)

0.1695 in (1)

0.173 in (1)

0.177 in (1)

0.18 in (1)

0.182 in (1)

0.1850 in (1)

0.1890 in (1)

0.191 in (1)

0.196 in (1)

0.199 in (1)

0.2031 in (1)

0.2055 in (1)

0.209 in (1)

0.213 in (1)

0.221 in (1)

0.228 in (1)

0.234 in (1)

0.2344 in (1)

0.238 in (1)

0.242 in (1)

0.246 in (1)

0.257 in (1)

0.261 in (1)

0.2656 in (1)

0.266 in (1)

0.272 in (1)

0.277 in (1)

0.281 in (1)

0.2813 in (1)

0.29 in (1)

0.295 in (1)

0.2969 in (1)

0.302 in (1)

0.316 in (1)

0.323 in (1)

0.3281 in (1)

0.332 in (1)

0.3438 in (1)

0.348 in (1)

0.358 in (1)

0.3594 in (1)

0.368 in (1)

0.377 in (1)

0.386 in (1)

0.3906 in (1)

0.397 in (1)

0.404 in (1)

0.4063 in (1)

0.413 in (1)

0.4219 in (1)

0.4531 in (1)

0.4688 in (1)

0.4844 in (1)
View more View less

Maximum Drilling Depth

0.0235 in 0.0235 in (1)
0.03 in 0.03 in (1)
0.0308 in 0.0308 in (1)
0.0315 in 0.0315 in (1)
0.0323 in 0.0323 in (1)
0.0349 in 0.0349 in (1)
0.0352 in (1)

0.039 in (1)

0.0413 in (1)

0.0476 in (1)

0.0503 in (1)

0.0548 in (1)

0.057 in (1)

0.0586 in (1)

0.0589 in (1)

0.0608 in (1)

0.0615 in (1)

0.0645 in (1)

0.0668 in (1)

0.0701 in (1)

0.072 in (1)

0.0746 in (1)

0.0761 in (1)

0.078 in (1)

0.0799 in (1)

0.0825 in (1)

0.0833 in (1)

0.0848 in (1)

0.087 in (1)

0.09 in (1)

0.102 in (1)

0.1054 in (1)

0.1103 in (1)

0.1121 in (1)

0.114 in (1)

0.1155 in (1)

0.1178 in (1)

0.1193 in (1)

0.1208 in (1)

0.1245 in (1)

0.1271 in (1)

0.1298 in (1)

0.1328 in (1)

0.135 in (1)

0.1365 in (1)

5/36 in (1)

1/7 in (1)

0.1433 in (1)

0.147 in (1)

0.1493 in (1)

0.1523 in (1)

0.1541 in (1)

0.1568 in (1)

0.1598 in (1)

0.1658 in (1)

0.171 in (1)

0.1755 in (1)

0.1758 in (1)

0.1785 in (1)

0.1815 in (1)

0.1845 in (1)

0.1928 in (1)

0.1958 in (1)

0.1992 in (1)

0.1995 in (1)

0.204 in (1)

0.2078 in (1)

0.2108 in (1)

0.211 in (1)

0.2175 in (1)

0.2213 in (1)

0.2227 in (1)

0.2265 in (1)

15/64 in (1)

0.237 in (1)

0.2423 in (1)

0.2461 in (1)

0.249 in (1)

1/4 in (1)

0.2579 in (1)

0.261 in (1)

17/64 in (1)

0.2685 in (1)

0.2696 in (1)

0.276 in (1)

0.2828 in (1)

0.2895 in (1)

0.293 in (1)

0.2978 in (1)

0.303 in (1)

0.3047 in (1)

0.3098 in (1)

0.3164 in (1)

0.3398 in (1)

0.3516 in (1)

0.3633 in (1)

3/8 in (1)

25/64 in (1)

7/16 in (1)

1/2 in (2)

9/16 in (2)

5/8 in (1)

11/16 in (1)

3/4 in (1)

49/64 in (1)

51/64 in (1)

13/16 in (1)

7/8 in (1)

1 in (1)

1 1/4 in (1)

1 1/2 in (1)

1 3/4 in (1)

2 in (1)
View more View less

Flute Length

0.3125 in 0.3125 in (1)
0.75 in 0.75 in (10)
3/4 in 3/4 in (2)
0.875 in 0.875 in (6)
7/8 in 7/8 in (1)
1 in 1 in (6)
1 1/4 in (2)

1.25 in (9)

1 3/8 in (4)

1.375 in (9)

1 5/8 in (5)

1.625 in (7)

1 3/4 in (3)

1.75 in (8)

2 in (7)

2.125 in (8)

2 3/8 in (1)

2.375 in (5)

2.5 in (4)

2 3/4 in (1)

2.75 in (4)

2 7/8 in (1)

2.875 in (7)

3 in (4)
View more View less

Shank Dia.

0.0313 in 0.0313 in (1)
0.04 in 0.04 in (1)
0.041 in 0.041 in (1)
0.042 in 0.042 in (1)
0.043 in 0.043 in (1)
0.0465 in 0.0465 in (1)
3/64 in (1)

0.0469 in (1)

0.052 in (1)

0.055 in (1)

1/16 in (2)

0.0635 in (1)

0.067 in (1)

0.073 in (1)

0.076 in (1)

0.0781 in (1)

0.0785 in (1)

0.081 in (1)

0.082 in (1)

0.086 in (1)

0.089 in (1)

0.0935 in (1)

3/32 in (2)

0.096 in (1)

0.0995 in (1)

0.1015 in (1)

0.104 in (1)

0.1065 in (1)

7/64 in (1)

0.11 in (1)

0.111 in (1)

0.113 in (1)

0.116 in (1)

0.12 in (1)

1/8 in (3)

0.136 in (1)

0.1405 in (1)

9/64 in (2)

0.147 in (1)

0.1495 in (1)

0.152 in (1)

0.154 in (1)

0.157 in (1)

0.159 in (1)

0.161 in (1)

0.166 in (1)

0.1695 in (1)

11/64 in (1)

0.173 in (1)

0.177 in (1)

0.18 in (1)

0.182 in (1)

5/27 in (1)

3/16 in (3)

7/37 in (1)

0.191 in (1)

0.196 in (1)

0.199 in (1)

0.2031 in (1)

13/64 in (1)

0.2055 in (1)

0.209 in (1)

0.213 in (1)

7/32 in (1)

0.221 in (1)

0.228 in (1)

0.234 in (1)

0.2344 in (1)

0.238 in (1)

0.242 in (1)

0.246 in (1)

1/4 in (1)

0.257 in (1)

0.261 in (1)

0.2656 in (1)

0.266 in (1)

0.272 in (1)

0.277 in (1)

0.281 in (1)

0.2813 in (1)

0.29 in (1)

0.295 in (1)

0.2969 in (1)

0.302 in (1)

5/16 in (1)

0.316 in (1)

0.323 in (1)

0.3281 in (1)

0.332 in (1)

0.3438 in (1)

0.348 in (1)

0.358 in (1)

0.3594 in (1)

0.368 in (1)

3/8 in (1)

0.377 in (1)

0.386 in (1)

0.3906 in (1)

0.397 in (1)

0.404 in (1)

0.4063 in (1)

0.413 in (1)

0.4219 in (1)

7/16 in (1)

0.4531 in (1)

0.4688 in (1)

0.4844 in (1)

1/2 in (1)
View more View less

Overall Length

1.25 in 1.25 in (1)
1 1/2 in 1 1/2 in (2)
1.5 in 1.5 in (10)
1 3/4 in 1 3/4 in (1)
1.75 in 1.75 in (6)
2 in 2 in (6)
2 1/4 in (2)

2.25 in (9)

2 1/2 in (4)

2.5 in (9)

2 3/4 in (5)

2.75 in (7)

3 in (11)

3 1/4 in (1)

3.25 in (6)

3.5 in (8)

4 in (11)

4 1/4 in (1)

4.25 in (3)

4 1/2 in (1)

4.5 in (7)

4 3/4 in (1)

4.75 in (3)
View more View less

Primary Material Application

Alloy, Carbon Steel, Cast Iron, Aluminum, Stainless Steel Alloy, Carbon Steel, Cast Iron, Aluminum, Stainless Steel (91)
Aluminum, Brass, Bronze, Cast Iron, Copper Aluminum, Brass, Bronze, Cast Iron, Copper (22)
Aluminum, Cast Iron, Non-Ferrous Aluminum, Cast Iron, Non-Ferrous (2)

Standards

ASME B94.11M ASME B94.11M (112)
ASME B94.11M-1993 ASME B94.11M-1993 (3)

Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

These drill bits do not have coolant holes. If coolant is required for drilling, it must be fed from the machine to the bits' tip using a separate hose. Carbide drill bits provide excellent hardness, wear resistance, and heat resistance. They are harder than high-speed steel, cobalt, or powdered-metal drill bits and require a rigid setup such as a fixed-spindle machine. The bits create precise holes with a smooth finish and often eliminate the need for reaming the hole after drilling. Jobber-length drill bits provide a good balance of strength and accuracy when drilling into a variety of materials.

https://catalogue.grainger.ca/?hybris=true

115 Results Found

In stock at branch(0)

Branch #

Change

Find a Branch

Sort results by:

Grid List

Results per page : 16 | 32 | 48

JOBBER LENGTH TWIST DRILL, #32 DRILL BIT SIZE, 2¼ IN LENGTH, RIGHT HAND, COBALT

CLEVELAND
JOBBER LENGTH TWIST DRILL, #32 DRILL BIT SIZE, 2¼ IN LENGTH, RIGHT HAND, COBALT
Item # GNF1727C89535
Mfr. Model # C89535

EHC: EHC :

This heavy-duty jobber length drill bit is made of carbide and has a 7/64 inch diameter, one-inch long shank. It is for use with alloy and carbon steel, aluminum, cast iron, stainless steel, and meets ASME standards. This 1727 series jobber length drill bit has a bright (uncoated) finish, and has wire measurements. It is non-coolant through with a 2¼ inch length. Plus it has two 1¼ inch spiral flutes, a straight shank, and 118 Degrees 4 facet point drill point.

This heavy-duty jobber length drill bit is made of carbide and has a 7/64 inch diameter, one-inch long shank. It is for use with alloy and carbon steel, aluminum, cast iron, stainless steel, and meets ASME standards. This 1727 series jobber length drill bit has a bright (uncoated) finish, and has wire measurements. It is non-coolant through with a 2¼ inch length. Plus it has two 1¼ inch spiral flutes, a straight shank, and 118 Degrees 4 facet point drill point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $58.30 / EACH

EHC: EHC :

Qty:

Compare

JOBBER LENGTH TWIST DRILL, #17 DRILL BIT SIZE, 2¾ IN LENGTH, RIGHT HAND, COBALT

CLEVELAND
JOBBER LENGTH TWIST DRILL, #17 DRILL BIT SIZE, 2¾ IN LENGTH, RIGHT HAND, COBALT
Item # GNF1727C89554
Mfr. Model # C89554

EHC: EHC :

This jobber length drill bit is made of carbide and has a 0.173 inch diameter, 1⅛ inch long shank. It is for use with alloy, aluminum, carbon steel, cast iron, stainless steel, and meets ASME standards. This 1727 series jobber length drill bit has a bright (uncoated) finish, and has wire measurements. It is non-coolant through with a 2¾ inch length. Plus it has two 1.625 inch spiral flutes, a straight shank, and 118 Degrees 4 facet point drill point.

This jobber length drill bit is made of carbide and has a 0.173 inch diameter, 1⅛ inch long shank. It is for use with alloy, aluminum, carbon steel, cast iron, stainless steel, and meets ASME standards. This 1727 series jobber length drill bit has a bright (uncoated) finish, and has wire measurements. It is non-coolant through with a 2¾ inch length. Plus it has two 1.625 inch spiral flutes, a straight shank, and 118 Degrees 4 facet point drill point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $68.55 / EACH

EHC: EHC :

Qty:

Compare

JOBBER LENGTH TWIST DRILL, #11 DRILL BIT SIZE, 2¾ IN LENGTH, RIGHT HAND, COBALT

CLEVELAND
JOBBER LENGTH TWIST DRILL, #11 DRILL BIT SIZE, 2¾ IN LENGTH, RIGHT HAND, COBALT
Item # GNF1727C89561
Mfr. Model # C89561

EHC: EHC :

This jobber length drill bit is made of carbide and has a 0.191 inch diameter, 1⅛ inch long shank. It is for use with alloy, aluminum, carbon steel, cast iron, stainless steel, and meets ASME standards. This 1727 series jobber length drill bit has a bright (uncoated) finish, and has wire measurements. It is non-coolant through with a 2¾ inch length. Plus it has two 1.625 inch spiral flutes, a straight shank, and 118 Degrees 4 facet point drill point.

This jobber length drill bit is made of carbide and has a 0.191 inch diameter, 1⅛ inch long shank. It is for use with alloy, aluminum, carbon steel, cast iron, stainless steel, and meets ASME standards. This 1727 series jobber length drill bit has a bright (uncoated) finish, and has wire measurements. It is non-coolant through with a 2¾ inch length. Plus it has two 1.625 inch spiral flutes, a straight shank, and 118 Degrees 4 facet point drill point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $72.36 / EACH

EHC: EHC :

Qty:

Compare

JOBBER LENGTH TWIST DRILL, #2 DRILL BIT SIZE, 3 IN LENGTH, RIGHT HAND, COBALT

CLEVELAND
JOBBER LENGTH TWIST DRILL, #2 DRILL BIT SIZE, 3 IN LENGTH, RIGHT HAND, COBALT
Item # GNF1727C89572
Mfr. Model # C89572

EHC: EHC :

This heavy-duty jobber length drill bit is made of carbide and has a 7/32 inch diameter, 1¼ inch long shank. It is for use with alloy and carbon steel, aluminum, cast iron, stainless steel, and meets ASME standards. This 1727 series jobber length drill bit has a bright (uncoated) finish, and has wire measurements. It is non-coolant through with a three-inch length. Plus it has two 1¾ inch spiral flutes, a straight shank, and 118 Degrees 4 facet point drill point.

This heavy-duty jobber length drill bit is made of carbide and has a 7/32 inch diameter, 1¼ inch long shank. It is for use with alloy and carbon steel, aluminum, cast iron, stainless steel, and meets ASME standards. This 1727 series jobber length drill bit has a bright (uncoated) finish, and has wire measurements. It is non-coolant through with a three-inch length. Plus it has two 1¾ inch spiral flutes, a straight shank, and 118 Degrees 4 facet point drill point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $87.67 / EACH

EHC: EHC :

Qty:

Compare

JOBBER LENGTH TWIST DRILL, C DRILL BIT SIZE, 3¼ IN LENGTH, RIGHT HAND, COBALT

CLEVELAND
JOBBER LENGTH TWIST DRILL, C DRILL BIT SIZE, 3¼ IN LENGTH, RIGHT HAND, COBALT
Item # GNF1727C89577
Mfr. Model # C89577

EHC: EHC :

This jobber length drill bit is made of carbide and has a 15/64 inch diameter, 1¼ inch long shank. It is for use with alloy, aluminum, carbon steel, cast iron, stainless steel, and meets ASME standards. This 1727 series jobber length drill bit has a bright (uncoated) finish, and has letter measurements. It is non-coolant through with a 1¼ inch length. Plus it has two 2 inch spiral flutes, a straight shank, and 118 Degrees 4 facet point drill point.

This jobber length drill bit is made of carbide and has a 15/64 inch diameter, 1¼ inch long shank. It is for use with alloy, aluminum, carbon steel, cast iron, stainless steel, and meets ASME standards. This 1727 series jobber length drill bit has a bright (uncoated) finish, and has letter measurements. It is non-coolant through with a 1¼ inch length. Plus it has two 2 inch spiral flutes, a straight shank, and 118 Degrees 4 facet point drill point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $106.52 / EACH

EHC: EHC :

Qty:

Compare

TWIST DRILL, 19/64 IN DRILL BIT SIZE, 4 IN LENGTH, RIGHT HAND, COBALT

CLEVELAND
TWIST DRILL, 19/64 IN DRILL BIT SIZE, 4 IN LENGTH, RIGHT HAND, COBALT
Item # GNF1727C89590
Mfr. Model # C89590

EHC: EHC :

This jobber length drill bit is made of carbide and has a 19/64 inch diameter, one-inch long shank. It is for use with alloy, aluminum, carbon steel, cast iron, stainless steel, and meets ASME standards. This 1727 series jobber length drill bit has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through with a four-inch length. Plus it has two 2⅜ inch spiral flutes, a straight shank, and 118 Degrees 4 facet point drill point.

This jobber length drill bit is made of carbide and has a 19/64 inch diameter, one-inch long shank. It is for use with alloy, aluminum, carbon steel, cast iron, stainless steel, and meets ASME standards. This 1727 series jobber length drill bit has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through with a four-inch length. Plus it has two 2⅜ inch spiral flutes, a straight shank, and 118 Degrees 4 facet point drill point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $141.19 / EACH

EHC: EHC :

Qty:

Compare

TWIST DRILL, 11/32 IN DRILL BIT SIZE, 4 IN LENGTH, RIGHT HAND, COBALT

CLEVELAND
TWIST DRILL, 11/32 IN DRILL BIT SIZE, 4 IN LENGTH, RIGHT HAND, COBALT
Item # GNF1727C89597
Mfr. Model # C89597

EHC: EHC :

This jobber length drill bit is made of carbide and has a 11/32 inch diameter, 1½ inch long shank. It is for use with alloy, aluminum, carbon steel, cast iron, stainless steel, and meets ASME standards. This 1727 series jobber length drill bit has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through with a four-inch length. Plus it has two 2½ inch spiral flutes, a straight shank, and 118 Degrees 4 facet point drill point.

This jobber length drill bit is made of carbide and has a 11/32 inch diameter, 1½ inch long shank. It is for use with alloy, aluminum, carbon steel, cast iron, stainless steel, and meets ASME standards. This 1727 series jobber length drill bit has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through with a four-inch length. Plus it has two 2½ inch spiral flutes, a straight shank, and 118 Degrees 4 facet point drill point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $162.44 / EACH

EHC: EHC :

Qty:

Compare

JOBBER LENGTH TWIST DRILL, P DRILL BIT SIZE, 4 IN LENGTH, RIGHT HAND, COBALT

CLEVELAND
JOBBER LENGTH TWIST DRILL, P DRILL BIT SIZE, 4 IN LENGTH, RIGHT HAND, COBALT
Item # GNF1727C89594
Mfr. Model # C89594

EHC: EHC :

This heavy-duty jobber length drill bit is made of carbide and has a 0.323 inch diameter, one-inch long shank. It is for use with alloy and carbon steel, aluminum, cast iron, stainless steel, and meets ASME standards. This 1727 series jobber drill bit has a bright (uncoated) finish, and has letter measurements. It is non-coolant through with a four-inch length. Plus it has two 2⅜ inch spiral flutes, a straight shank, and 118 Degrees 4 facet point drill point.

This heavy-duty jobber length drill bit is made of carbide and has a 0.323 inch diameter, one-inch long shank. It is for use with alloy and carbon steel, aluminum, cast iron, stainless steel, and meets ASME standards. This 1727 series jobber drill bit has a bright (uncoated) finish, and has letter measurements. It is non-coolant through with a four-inch length. Plus it has two 2⅜ inch spiral flutes, a straight shank, and 118 Degrees 4 facet point drill point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $164.12 / EACH

EHC: EHC :

Qty:

Compare

JOBBER LENGTH TWIST DRILL, 31/64 IN DRILL BIT SIZE, 4¾ IN L, RIGHT HAND, COBALT

CLEVELAND
JOBBER LENGTH TWIST DRILL, 31/64 IN DRILL BIT SIZE, 4¾ IN L, RIGHT HAND, COBALT
Item # GNF1727C89614
Mfr. Model # C89614

EHC: EHC :

This heavy-duty jobber length drill bit is made of carbide and has a 0.4844 inch diameter, 1⅝ inch long shank. It is for use with alloy and carbon steel, aluminum, cast iron, stainless steel, and meets ASME standards. This 1727 series jobber drill bit has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through with a 4¾ inch length. Plus it has two 3 inch spiral flutes, a straight shank, and 118 Degrees 4 facet point drill point.

This heavy-duty jobber length drill bit is made of carbide and has a 0.4844 inch diameter, 1⅝ inch long shank. It is for use with alloy and carbon steel, aluminum, cast iron, stainless steel, and meets ASME standards. This 1727 series jobber drill bit has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through with a 4¾ inch length. Plus it has two 3 inch spiral flutes, a straight shank, and 118 Degrees 4 facet point drill point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $369.17 / EACH

EHC: EHC :

Qty:

Compare

JOBBER LENGTH TWIST DRILL, #51 DRILL BIT SIZE, 1½ IN LENGTH, RIGHT HAND, COBALT

CLEVELAND
JOBBER LENGTH TWIST DRILL, #51 DRILL BIT SIZE, 1½ IN LENGTH, RIGHT HAND, COBALT
Item # GNF1727C89513
Mfr. Model # C89513

EHC: EHC :

This heavy-duty jobber length drill bit is made of carbide and has a 1/16 inch diameter, ¾ inch long shank. It is for use with alloy and carbon steel, aluminum, cast iron, stainless steel, and meets ASME standards. This 1727 series jobber length drill bit has a bright (uncoated) finish, and has wire measurements. It is non-coolant through with a 1½ inch length. Plus it has two ¾ inch spiral flutes, a straight shank, and 118 Degrees 4 facet point drill point.

This heavy-duty jobber length drill bit is made of carbide and has a 1/16 inch diameter, ¾ inch long shank. It is for use with alloy and carbon steel, aluminum, cast iron, stainless steel, and meets ASME standards. This 1727 series jobber length drill bit has a bright (uncoated) finish, and has wire measurements. It is non-coolant through with a 1½ inch length. Plus it has two ¾ inch spiral flutes, a straight shank, and 118 Degrees 4 facet point drill point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $41.72 / EACH

EHC: EHC :

Qty:

Compare

JOBBER LENGTH TWIST DRILL, #60 DRILL BIT SIZE, 1½ IN LENGTH, RIGHT HAND, COBALT

CLEVELAND
JOBBER LENGTH TWIST DRILL, #60 DRILL BIT SIZE, 1½ IN LENGTH, RIGHT HAND, COBALT
Item # GNF1727C89502
Mfr. Model # C89502

EHC: EHC :

This jobber length drill bit is made of carbide and has a 1/32 inch diameter, ¾ inch long shank. It is for use with alloy, aluminum, carbon steel, cast iron, stainless steel, and meets ASME standards. This 1727 series jobber length drill bit has a bright (uncoated) finish, and has wire measurements. It is non-coolant through with a 1½ inch length. Plus it has two ¾ inch spiral flutes, a straight shank, and 118 Degrees 4 facet point drill point.

This jobber length drill bit is made of carbide and has a 1/32 inch diameter, ¾ inch long shank. It is for use with alloy, aluminum, carbon steel, cast iron, stainless steel, and meets ASME standards. This 1727 series jobber length drill bit has a bright (uncoated) finish, and has wire measurements. It is non-coolant through with a 1½ inch length. Plus it has two ¾ inch spiral flutes, a straight shank, and 118 Degrees 4 facet point drill point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $46.03 / EACH

EHC: EHC :

Qty:

Compare

JOBBER LENGTH TWIST DRILL, #55 DRILL BIT SIZE, 1½ IN LENGTH, RIGHT HAND, COBALT

CLEVELAND
JOBBER LENGTH TWIST DRILL, #55 DRILL BIT SIZE, 1½ IN LENGTH, RIGHT HAND, COBALT
Item # GNF1727C89508
Mfr. Model # C89508

EHC: EHC :

This jobber length drill bit is made of carbide and has a 0.052 inch diameter, ¾ inch long shank. It is for use with alloy, aluminum, carbon steel, cast iron, stainless steel, and meets ASME standards. This 1727 series jobber length drill bit has a bright (uncoated) finish, and has wire measurements. It is non-coolant through with a 1½ inch length. Plus it has two ¾ inch spiral flutes, a straight shank, and 118 Degrees 4 facet point drill point.

This jobber length drill bit is made of carbide and has a 0.052 inch diameter, ¾ inch long shank. It is for use with alloy, aluminum, carbon steel, cast iron, stainless steel, and meets ASME standards. This 1727 series jobber length drill bit has a bright (uncoated) finish, and has wire measurements. It is non-coolant through with a 1½ inch length. Plus it has two ¾ inch spiral flutes, a straight shank, and 118 Degrees 4 facet point drill point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $47.02 / EACH

EHC: EHC :

Qty:

Compare

JOBBER LENGTH TWIST DRILL, #46 DRILL BIT SIZE, 1¾ IN LENGTH, RIGHT HAND, COBALT

CLEVELAND
JOBBER LENGTH TWIST DRILL, #46 DRILL BIT SIZE, 1¾ IN LENGTH, RIGHT HAND, COBALT
Item # GNF1727C89519
Mfr. Model # C89519

EHC: EHC :

This jobber length drill bit is made of carbide and has a 0.081 inch diameter, ⅞ inch long shank. It is for use with alloy, aluminum, carbon steel, cast iron, stainless steel, and meets ASME standards. This 1727 series jobber length drill bit has a bright (uncoated) finish, and has wire measurements. It is non-coolant through with a 1¾ inch length. Plus it has two ⅞ inch spiral flutes, a straight shank, and 118 Degrees 4 facet point drill point.

This jobber length drill bit is made of carbide and has a 0.081 inch diameter, ⅞ inch long shank. It is for use with alloy, aluminum, carbon steel, cast iron, stainless steel, and meets ASME standards. This 1727 series jobber length drill bit has a bright (uncoated) finish, and has wire measurements. It is non-coolant through with a 1¾ inch length. Plus it has two ⅞ inch spiral flutes, a straight shank, and 118 Degrees 4 facet point drill point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $43.24 / EACH

EHC: EHC :

Qty:

Compare

JOBBER LENGTH TWIST DRILL, #33 DRILL BIT SIZE, 2¼ IN LENGTH, RIGHT HAND, COBALT

CLEVELAND
JOBBER LENGTH TWIST DRILL, #33 DRILL BIT SIZE, 2¼ IN LENGTH, RIGHT HAND, COBALT
Item # GNF1727C89534
Mfr. Model # C89534

EHC: EHC :

This jobber length drill bit is made of carbide and has a 7/64 inch diameter, one-inch long shank. It is for use with alloy, aluminum, carbon steel, cast iron, stainless steel, and meets ASME standards. This 1727 series jobber length drill bit has a bright (uncoated) finish, and has wire measurements. It is non-coolant through with a 2¼ inch length. Plus it has two 1¼ inch spiral flutes, a straight shank, and 118 Degrees 4 facet point drill point.

This jobber length drill bit is made of carbide and has a 7/64 inch diameter, one-inch long shank. It is for use with alloy, aluminum, carbon steel, cast iron, stainless steel, and meets ASME standards. This 1727 series jobber length drill bit has a bright (uncoated) finish, and has wire measurements. It is non-coolant through with a 2¼ inch length. Plus it has two 1¼ inch spiral flutes, a straight shank, and 118 Degrees 4 facet point drill point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $56.99 / EACH

EHC: EHC :

Qty:

Compare

JOBBER LENGTH TWIST DRILL, #31 DRILL BIT SIZE, 2¼ IN LENGTH, RIGHT HAND, COBALT

CLEVELAND
JOBBER LENGTH TWIST DRILL, #31 DRILL BIT SIZE, 2¼ IN LENGTH, RIGHT HAND, COBALT
Item # GNF1727C89536
Mfr. Model # C89536

EHC: EHC :

This jobber length drill bit is made of carbide and has a 0.12 inch diameter, one-inch long shank. It is for use with alloy, aluminum, carbon steel, cast iron, stainless steel, and meets ASME standards. This 1727 series jobber length drill bit has a bright (uncoated) finish, and has wire measurements. It is non-coolant through with a 2¼ inch length. Plus it has two 1¼ inch spiral flutes, a straight shank, and 118 Degrees 4 facet point drill point.

This jobber length drill bit is made of carbide and has a 0.12 inch diameter, one-inch long shank. It is for use with alloy, aluminum, carbon steel, cast iron, stainless steel, and meets ASME standards. This 1727 series jobber length drill bit has a bright (uncoated) finish, and has wire measurements. It is non-coolant through with a 2¼ inch length. Plus it has two 1¼ inch spiral flutes, a straight shank, and 118 Degrees 4 facet point drill point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $58.74 / EACH

EHC: EHC :

Qty:

Compare

JOBBER LENGTH DRILL BIT, 9/64 IN DRILL BIT SIZE, 2½ IN LENGTH, RIGHT HAND, COBALT

CLEVELAND
JOBBER LENGTH DRILL BIT, 9/64 IN DRILL BIT SIZE, 2½ IN LENGTH, RIGHT HAND, COBALT
Item # GNF1727C47580
Mfr. Model # C47580

EHC: EHC :

This jobber length drill bit is made of carbide and has a ⅛ inch diameter, 1⅛ inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, and meets ASME standards. This 1727 series jobber length drill bit has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through with a 2½ inch length. Plus it has two 1⅜ inch spiral flutes, a straight shank, and 118 Degrees 4 facet point drill point.

This jobber length drill bit is made of carbide and has a ⅛ inch diameter, 1⅛ inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, and meets ASME standards. This 1727 series jobber length drill bit has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through with a 2½ inch length. Plus it has two 1⅜ inch spiral flutes, a straight shank, and 118 Degrees 4 facet point drill point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $73.50 / EACH

EHC: EHC :

Qty:

Compare

Grid List

Results per page : 16 | 32 | 48

Availability

Pick Up

Shipping

To view Availability, please select a Branch

To view Availability for another location, please enter postal code below Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.

Select a Branch

Selected Branch

(View on Map)

Apply

Enter the city, province, postal code or branch number.

Cancel

Please select pick up location

No Result Found.

Selected Branch

,
,

Phone :
Fax :
Hours :

No Result Found.

New Postal Code

Postal Code should be in LNLNLN format e.g. L3T7W8

Apply

Add to Order List

Your items were added

Your items were added to some lists

Max quantity exceeded. The item could not be added to the following List(s)

No Existing List Found. Please Create New List below.

Your list has been created

Please select a list

Add to an existing list

My List

No Existing 'My List' Found. Please Create New 'My List' first.

No Results Found

Select one or multiple lists

Create a new list

List Name

My List

You have #compareProducts out of 5 products to compare selected.

Clear All

Add Item

Hide

Show

Filter Results By

Applied Filters

Clear All

Search within these results

Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

115 Results Found

Add to Order List

Company Information

Resources

Services

Ordering

Customer Support

Item #	Qty

Filter Results By

Applied Filters Clear All

Search within these results

Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

115 Results Found

Add to Order List

Company Information

Resources

Services

Ordering

Customer Support

Applied Filters

Clear All