Non-coolant-through high-speed steel jobber-length drill bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. High-speed steel drill bits provide more flexibility and absorb more shock and vibration than cobalt, powdered-metal, and carbide drill bits, making them suitable for use in manual drilling machines and handheld power tools. They may leave a rough finish on the hole. Jobber-length drill bits are the most commonly used drill-bit length. They provide a good balance of strength and accuracy when drilling into a range of materials.
This jobber drill bit features a super speed tip and a high-flow flute design. It has a flute length of 15/16 inches, an overall length of 1 15/16 inches, and a diameter of 5/64 inches. This drill bit is made of high-speed steel and has a 135 Degrees point angle.
This jobber drill bit features a super speed tip and a high-flow flute design. It has a flute length of 15/16 inches, an overall length of 1 15/16 inches, and a diameter of 5/64 inches. This drill bit is made of high-speed steel and has a 135 Degrees point angle.
This jobber drill bit features a super speed tip and a high-flow flute design. It has a flute length of 2 1/16 inches, an overall length of 3 3/8 inches, and a diameter of 3/16 inches. This drill bit is made of high-speed steel and has a 135 Degrees point angle.
This jobber drill bit features a super speed tip and a high-flow flute design. It has a flute length of 2 1/16 inches, an overall length of 3 3/8 inches, and a diameter of 3/16 inches. This drill bit is made of high-speed steel and has a 135 Degrees point angle.
This jobber drill bit features a super speed tip and a high-flow flute design. It has a flute length of 2 1/2 inches, an overall length of four inches, and a diameter of 1/4 inches. This drill bit is made of high-speed steel and has a 135 Degrees point angle.
This jobber drill bit features a super speed tip and a high-flow flute design. It has a flute length of 2 1/2 inches, an overall length of four inches, and a diameter of 1/4 inches. This drill bit is made of high-speed steel and has a 135 Degrees point angle.
This jobber drill bit features a super speed tip and a high-flow flute design. It has a flute length of 3 3/16 inches, an overall length of 4 15/16 inches, and a diameter of 23/64 inches. This drill bit is made of high-speed steel and has a 135 Degrees point angle.
This jobber drill bit features a super speed tip and a high-flow flute design. It has a flute length of 3 3/16 inches, an overall length of 4 15/16 inches, and a diameter of 23/64 inches. This drill bit is made of high-speed steel and has a 135 Degrees point angle.
This jobber drill bit features a super speed tip and a high-flow flute design. It has a flute length of 3 7/16 inches, an overall length of 5 1/4 inches, and a diameter of 25/64 inches. This drill bit is made of high-speed steel and has a 135 Degrees point angle.
This jobber drill bit features a super speed tip and a high-flow flute design. It has a flute length of 3 7/16 inches, an overall length of 5 1/4 inches, and a diameter of 25/64 inches. This drill bit is made of high-speed steel and has a 135 Degrees point angle.
This jobber drill bit features a super speed tip and a high-flow flute design. It has a flute length of 1 7/8 inches, an overall length of 3 1/8 inches, and a diameter of 11/64 inches. This drill bit is made of high-speed steel and has a 135 Degrees point angle.
This jobber drill bit features a super speed tip and a high-flow flute design. It has a flute length of 1 7/8 inches, an overall length of 3 1/8 inches, and a diameter of 11/64 inches. This drill bit is made of high-speed steel and has a 135 Degrees point angle.
This jobber drill bit features a super speed tip and a high-flow flute design. It has a flute length of 3/8 inches, an overall length of 1 3/16 inches, and a diameter of 1/32 inches. This drill bit is made of high-speed steel and has a 135 Degrees point angle.
This jobber drill bit features a super speed tip and a high-flow flute design. It has a flute length of 3/8 inches, an overall length of 1 3/16 inches, and a diameter of 1/32 inches. This drill bit is made of high-speed steel and has a 135 Degrees point angle.
This jobber drill bit features a super speed tip and a high-flow flute design. It has a flute length of 3/16 inches, an overall length of 13/16 inches, and a diameter of 1/64 inches. This drill bit is made of high-speed steel and has a 135 Degrees point angle.
This jobber drill bit features a super speed tip and a high-flow flute design. It has a flute length of 3/16 inches, an overall length of 13/16 inches, and a diameter of 1/64 inches. This drill bit is made of high-speed steel and has a 135 Degrees point angle.
This Hex Shank SST+ stub-length drill bit features an exclusive self-centering speed tip, heavy-duty body construction, Special bronze SST surface treatment, and a short length for maximum breakage resistance. This high speed steel drill bit is a 19/64 inch diameter 1 5/16 inch flute length 2 15/16 inches overall length and a 135 Degrees point angle.
This Hex Shank SST+ stub-length drill bit features an exclusive self-centering speed tip, heavy-duty body construction, Special bronze SST surface treatment, and a short length for maximum breakage resistance. This high speed steel drill bit is a 19/64 inch diameter 1 5/16 inch flute length 2 15/16 inches overall length and a 135 Degrees point angle.
This jobber drill bit features a super speed tip and a high-flow flute design. It has a flute length of 1 3/16 inches, an overall length of 2 1/4 inches, and a diameter of 3/32 inches. This drill bit is made of high-speed steel and has a 135 Degrees point angle.
This jobber drill bit features a super speed tip and a high-flow flute design. It has a flute length of 1 3/16 inches, an overall length of 2 1/4 inches, and a diameter of 3/32 inches. This drill bit is made of high-speed steel and has a 135 Degrees point angle.
This jobber drill bit features a super speed tip and a high-flow flute design. It has a flute length of 5/8 inches, an overall length of 1 1/2 inches, and a diameter of 3/64 inches. This drill bit is made of high-speed steel and has a 135 Degrees point angle.
This jobber drill bit features a super speed tip and a high-flow flute design. It has a flute length of 5/8 inches, an overall length of 1 1/2 inches, and a diameter of 3/64 inches. This drill bit is made of high-speed steel and has a 135 Degrees point angle.
This jobber drill bit features a super speed tip and a high-flow flute design. It has a flute length of 2 1/16 inches, an overall length of 3 3/8 inches, and a diameter of 13/64 inches. This drill bit is made of high-speed steel and has a 135 Degrees point angle.
This jobber drill bit features a super speed tip and a high-flow flute design. It has a flute length of 2 1/16 inches, an overall length of 3 3/8 inches, and a diameter of 13/64 inches. This drill bit is made of high-speed steel and has a 135 Degrees point angle.
This jobber drill bit features a super speed tip and a high-flow flute design. It has a flute length of 3 7/16 inches, an overall length of 5 1/4 inches, and a diameter of 3/8 inches. This drill bit is made of high-speed steel and has a 135 Degrees point angle.
This jobber drill bit features a super speed tip and a high-flow flute design. It has a flute length of 3 7/16 inches, an overall length of 5 1/4 inches, and a diameter of 3/8 inches. This drill bit is made of high-speed steel and has a 135 Degrees point angle.
This jobber drill bit features a super speed tip and a high-flow flute design. It has a flute length of 2 11/16 inches, an overall length of 4 5/16 inches, and a diameter of 9/32 inches. This drill bit is made of high-speed steel and has a 135 Degrees point angle.
This jobber drill bit features a super speed tip and a high-flow flute design. It has a flute length of 2 11/16 inches, an overall length of 4 5/16 inches, and a diameter of 9/32 inches. This drill bit is made of high-speed steel and has a 135 Degrees point angle.
This jobber drill bit features a super speed tip and a high-flow flute design. It has a flute length of 1 5/16 inches, an overall length of 2 3/8 inches, and a diameter of 7/64 inches. This drill bit is made of high-speed steel and has a 135 Degrees point angle.
This jobber drill bit features a super speed tip and a high-flow flute design. It has a flute length of 1 5/16 inches, an overall length of 2 3/8 inches, and a diameter of 7/64 inches. This drill bit is made of high-speed steel and has a 135 Degrees point angle.
This jobber drill bit features a super speed tip and a high-flow flute design. It has a flute length of 1 11/16 inches, an overall length of 2 15/16 inches, and a diameter of 5/32 inches. This drill bit is made of high-speed steel and has a 135 Degrees point angle.
This jobber drill bit features a super speed tip and a high-flow flute design. It has a flute length of 1 11/16 inches, an overall length of 2 15/16 inches, and a diameter of 5/32 inches. This drill bit is made of high-speed steel and has a 135 Degrees point angle.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.