ESD SafeESD-safe tools have handle materials or coatings that dissipate electrostatic charges to protect static-sensitive electrical components from damage.
Product ITEM is unavailable. See products from the same category below.
Nippers
The compact, pincer-like jaws of nippers grab onto and cut through wire, screws, bolts, and nails. Also known as end-cutting pliers, nippers position their rivet near the cutting edge to reduce the force required to make cuts. They cut close to surfaces without digging into them, and are commonly used to pull staples, nails, and screws out of framing.
To twist and cut wire in one operation: fast, reliable and economical. Unobtained precision and long service life make these the most widely purchased concreters´ nippers in the world. Cutting edges with additional hardness- cutting edge hardness approx. 61 HRC. High-grade special tool steel- forged, oil-hardened.
To twist and cut wire in one operation: fast, reliable and economical. Unobtained precision and long service life make these the most widely purchased concreters´ nippers in the world. Cutting edges with additional hardness- cutting edge hardness approx. 61 HRC. High-grade special tool steel- forged, oil-hardened.
To twist and cut wire in one operation: fast, reliable and economical. Unobtained precision and long service life make these the most widely purchased concreters´ nippers in the world. Cutting edges with additional hardness- cutting edge hardness approx. 61 HRC. High-grade special tool steel- forged, oil-hardened.
To twist and cut wire in one operation: fast, reliable and economical. Unobtained precision and long service life make these the most widely purchased concreters´ nippers in the world. Cutting edges with additional hardness- cutting edge hardness approx. 61 HRC. High-grade special tool steel- forged, oil-hardened.
To twist and cut wire in one operation: fast, reliable and economical. Unobtained precision and long service life make these the most widely purchased concreters´ nippers in the world. Cutting edges with additional hardness- cutting edge hardness approx. 61 HRC. High-grade special tool steel- forged, oil-hardened.
To twist and cut wire in one operation: fast, reliable and economical. Unobtained precision and long service life make these the most widely purchased concreters´ nippers in the world. Cutting edges with additional hardness- cutting edge hardness approx. 61 HRC. High-grade special tool steel- forged, oil-hardened.
This end cutting pliers has a length of 6¼ inch, plus it weighs 0.5 pounds and is not insulated. The plastic handle is red and has a dipped style/type. It features extreme wear resistance, forged, oil-hardened and meets the standards for DIN ISO 9243.
This end cutting pliers has a length of 6¼ inch, plus it weighs 0.5 pounds and is not insulated. The plastic handle is red and has a dipped style/type. It features extreme wear resistance, forged, oil-hardened and meets the standards for DIN ISO 9243.
This end cutting pliers has a length of 8 inch, plus it weighs 0.8 pounds and is not insulated. The handle is blue and has a dipped style/type. It features forged, multi-stage oil-hardened and meets the standards for DIN ISO 5748. This end cutting pliers is designed for: hard wire, piano wire, soft wire.
This end cutting pliers has a length of 8 inch, plus it weighs 0.8 pounds and is not insulated. The handle is blue and has a dipped style/type. It features forged, multi-stage oil-hardened and meets the standards for DIN ISO 5748. This end cutting pliers is designed for: hard wire, piano wire, soft wire.
This end cutting nippers has a length of 4¾ inch, plus it weighs 0.2 pounds and is not insulated. The handle is black/grey. It features electrically discharging handles, forged, low-friction double spring, multi-stage oil-hardened and more and meets the standards for DIN ISO 9654. This end cutting nippers is designed for: electronics.
This end cutting nippers has a length of 4¾ inch, plus it weighs 0.2 pounds and is not insulated. The handle is black/grey. It features electrically discharging handles, forged, low-friction double spring, multi-stage oil-hardened and more and meets the standards for DIN ISO 9654. This end cutting nippers is designed for: electronics.
This end cutting nippers has a length of 8¾ inch, plus it weighs 0.7 pounds and is not insulated. The plastic handle is red with an ergonomic style/type. It meets the standards for DIN ISO 9242.
This end cutting nippers has a length of 8¾ inch, plus it weighs 0.7 pounds and is not insulated. The plastic handle is red with an ergonomic style/type. It meets the standards for DIN ISO 9242.
This end cutting pliers has a length of 5 inch, plus it weighs 0.2 pounds and is not insulated. The plastic handle is red and has a dipped style/type. It features forged, multi-stage oil-hardened and meets the standards for DIN ISO 5748. This end cutting pliers is designed for: hard wire, piano wire, soft wire.
This end cutting pliers has a length of 5 inch, plus it weighs 0.2 pounds and is not insulated. The plastic handle is red and has a dipped style/type. It features forged, multi-stage oil-hardened and meets the standards for DIN ISO 5748. This end cutting pliers is designed for: hard wire, piano wire, soft wire.
Precision pliers for ultra fine cutting work, e. g. in electronics and fine mechanics. Electrically discharging handles - dissipative. Ground, very sharp cutting edges without bevel for flush cutting. Precision shaped tips cut wires resting on a board from 1/64" (0.2 mm) dia.. Cutting edges additionally induction hardened. Extremely smooth movement for minimum operator fatigue. With opening spring. INOX or Special tool steel. INOX - stainless steel
Precision pliers for ultra fine cutting work, e. g. in electronics and fine mechanics. Electrically discharging handles - dissipative. Ground, very sharp cutting edges without bevel for flush cutting. Precision shaped tips cut wires resting on a board from 1/64" (0.2 mm) dia.. Cutting edges additionally induction hardened. Extremely smooth movement for minimum operator fatigue. With opening spring. INOX or Special tool steel. INOX - stainless steel
This end cutting nippers has a length of 11¾ inch, plus it weighs 1.1 pounds and is not insulated. The steel handle is black. It meets the standards for DIN ISO 9242.
This end cutting nippers has a length of 11¾ inch, plus it weighs 1.1 pounds and is not insulated. The steel handle is black. It meets the standards for DIN ISO 9242.
This end cutting nippers has a length of 4½ inch, plus it weighs 0.2 pounds and is not insulated. The handle is multicoloured and has a standard style/type. It features 27 degrees oblique end cutter, mirror polished head and meets the standards for ISO 9654.
This end cutting nippers has a length of 4½ inch, plus it weighs 0.2 pounds and is not insulated. The handle is multicoloured and has a standard style/type. It features 27 degrees oblique end cutter, mirror polished head and meets the standards for ISO 9654.
This end cutting pliers has a length of 8¾ inch, plus it weighs one pound and is not insulated. The plastic handle is red and has a dipped style/type. It features extreme wear resistance, forged, oil-hardened and meets the standards for DIN ISO 9243.
This end cutting pliers has a length of 8¾ inch, plus it weighs one pound and is not insulated. The plastic handle is red and has a dipped style/type. It features extreme wear resistance, forged, oil-hardened and meets the standards for DIN ISO 9243.
These eight-inch bolt end cutting nippers are made of chrome vanadium steel, featuring greater cutting capacity due to a high leverage joint. They require less effort than conventional end-cutting nippers and cut nails, small bolts, and all wires including piano wires. They have a red plastic coated handle and a spring return. They have a jaw size of 3/8 x 7/16 inches and a maximum opening of 2.12 inches.
These eight-inch bolt end cutting nippers are made of chrome vanadium steel, featuring greater cutting capacity due to a high leverage joint. They require less effort than conventional end-cutting nippers and cut nails, small bolts, and all wires including piano wires. They have a red plastic coated handle and a spring return. They have a jaw size of 3/8 x 7/16 inches and a maximum opening of 2.12 inches.
This end cutting pliers has a length of 7 inch, plus it weighs 0.7 pounds and is not insulated. The plastic handle is red and has a dipped style/type. It features extreme wear resistance, forged, oil-hardened and meets the standards for DIN ISO 9243.
This end cutting pliers has a length of 7 inch, plus it weighs 0.7 pounds and is not insulated. The plastic handle is red and has a dipped style/type. It features extreme wear resistance, forged, oil-hardened and meets the standards for DIN ISO 9243.
This precision nippers has a length of 5 inch, plus it weighs 0.1 pounds and is not insulated. The handle is blue with an ergonomic style/type. It features ground, joint with stainless steel rivet and meets the standards for DIN ISO 9654. This precision nippers is designed for: electronics.
This precision nippers has a length of 5 inch, plus it weighs 0.1 pounds and is not insulated. The handle is blue with an ergonomic style/type. It features ground, joint with stainless steel rivet and meets the standards for DIN ISO 9654. This precision nippers is designed for: electronics.
Features a greater cutting capacity and requires less effort than conventional end cutting nippers. Cuts nails, small bolts and all wires including piano wires. Exceptional cutting capacity due to high leverage joint. Cutting edge approx. 64 HRC. Vanadium electric steel: forged oil-hardened
Features a greater cutting capacity and requires less effort than conventional end cutting nippers. Cuts nails, small bolts and all wires including piano wires. Exceptional cutting capacity due to high leverage joint. Cutting edge approx. 64 HRC. Vanadium electric steel: forged oil-hardened
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
