Bit Retainer TypeBit retainers secure bits to screwdriver shafts. Screwdrivers with fixed bit retainers have permanently attached bits. Other retainer types allow bits to be changed to match different fastener heads.
Suggested results for "SUGGEST-ITEM"
Product ITEM is unavailable. See products from the same category below.
Multi-Bit Screwdrivers
Multi-bit screwdrivers come with multiple tip sizes and styles that attach to one handle and allow a single tool to loosen and tighten a variety of screw sizes. They avoid the need to carry a bulky set of screwdrivers with handles. Multi-bit models have a handle attached to a shaft with a tip that is inserted into shaft. The tip is inserted into the indentation in the screwhead and the handle is turned to rotate the screw. Some models allow extra bits to be stored in the handle to ease access to bits and avoid loss.
This multi-bit screwdriver has a length of 6¾ inches and is not insulated. The plastic handle has a moulded style/type. In addition, it is made of alloy steel, has a SAE measurement type, is corrosion-resistant, has a chrome finish, plus it is non-sparking, and is not tether ready with an ergonomic grip. This multi-bit screwdriver includes one piece.
This multi-bit screwdriver has a length of 6¾ inches and is not insulated. The plastic handle has a moulded style/type. In addition, it is made of alloy steel, has a SAE measurement type, is corrosion-resistant, has a chrome finish, plus it is non-sparking, and is not tether ready with an ergonomic grip. This multi-bit screwdriver includes one piece.
This multi-bit screwdriver has a length of 9 inches and is not insulated. The plastic, rubber handle has a moulded style/type. It meets the standards for TXF-702. In addition, it is made of alloy steel, has a SAE measurement type, is corrosion-resistant, has a black oxide bits, chrome shank finish, plus it is non-sparking, and is not tether ready with a non-slip grip. This multi-bit screwdriver includes adapter, 32 pieces.
This multi-bit screwdriver has a length of 9 inches and is not insulated. The plastic, rubber handle has a moulded style/type. It meets the standards for TXF-702. In addition, it is made of alloy steel, has a SAE measurement type, is corrosion-resistant, has a black oxide bits, chrome shank finish, plus it is non-sparking, and is not tether ready with a non-slip grip. This multi-bit screwdriver includes adapter, 32 pieces.
This multi-bit screwdriver has a length of 12 inches and is not insulated. The plastic handle has a moulded style/type. It meets the standards for ASME B107.6-2008. In addition, it is made of alloy steel, has a SAE measurement type, is not corrosion-resistant, has a black oxide finish, plus it is non-sparking, and is not tether ready with an ergonomic grip. This multi-bit screwdriver includes five pieces.
This multi-bit screwdriver has a length of 12 inches and is not insulated. The plastic handle has a moulded style/type. It meets the standards for ASME B107.6-2008. In addition, it is made of alloy steel, has a SAE measurement type, is not corrosion-resistant, has a black oxide finish, plus it is non-sparking, and is not tether ready with an ergonomic grip. This multi-bit screwdriver includes five pieces.
This multi-bit screwdriver has a length of 3½ inches and is not insulated. The plastic, rubber handle has a moulded style/type. It meets the standards for ASME B107.600. In addition, it is made of alloy steel, has a SAE measurement type, is corrosion-resistant, has a black oxide finish, plus it is non-sparking, and is not tether ready with a non-slip grip. This multi-bit screwdriver includes two pieces.
This multi-bit screwdriver has a length of 3½ inches and is not insulated. The plastic, rubber handle has a moulded style/type. It meets the standards for ASME B107.600. In addition, it is made of alloy steel, has a SAE measurement type, is corrosion-resistant, has a black oxide finish, plus it is non-sparking, and is not tether ready with a non-slip grip. This multi-bit screwdriver includes two pieces.
This multi-bit screwdriver has a length of 5 inches and is not insulated. The plastic handle has a moulded style/type. It meets the standards for ASME B107.600. In addition, it is made of alloy steel, has a SAE measurement type, is corrosion-resistant, has a black oxide finish, plus it is non-sparking, and is not tether ready with an ergonomic grip. This multi-bit screwdriver includes four pieces.
This multi-bit screwdriver has a length of 5 inches and is not insulated. The plastic handle has a moulded style/type. It meets the standards for ASME B107.600. In addition, it is made of alloy steel, has a SAE measurement type, is corrosion-resistant, has a black oxide finish, plus it is non-sparking, and is not tether ready with an ergonomic grip. This multi-bit screwdriver includes four pieces.
This multi-bit screwdriver has a length of 7½ inches and is not insulated. The multicomponent handle has a moulded style/type. It meets the standards for ASME B107.600. In addition, it is made of alloy steel, has a SAE measurement type, is corrosion-resistant, has a black oxide bits, chrome shank finish, plus it is non-sparking, and is not tether ready with a non-slip grip. This multi-bit screwdriver includes six pieces.
This multi-bit screwdriver has a length of 7½ inches and is not insulated. The multicomponent handle has a moulded style/type. It meets the standards for ASME B107.600. In addition, it is made of alloy steel, has a SAE measurement type, is corrosion-resistant, has a black oxide bits, chrome shank finish, plus it is non-sparking, and is not tether ready with a non-slip grip. This multi-bit screwdriver includes six pieces.
This multi-bit screwdriver has a length of 3¼ inches and is not insulated. The plastic handle has a straight style/type. It meets the standards for ASME B107.600. In addition, it is made of alloy steel, has a SAE measurement type, is corrosion-resistant, has a black oxide bits, chrome shank finish, plus it is non-sparking, and is not tether ready with an ergonomic grip. This multi-bit screwdriver includes six pieces.
This multi-bit screwdriver has a length of 3¼ inches and is not insulated. The plastic handle has a straight style/type. It meets the standards for ASME B107.600. In addition, it is made of alloy steel, has a SAE measurement type, is corrosion-resistant, has a black oxide bits, chrome shank finish, plus it is non-sparking, and is not tether ready with an ergonomic grip. This multi-bit screwdriver includes six pieces.
This multi-bit screwdriver has a length of 6 inches and is not insulated. The multicomponent handle has a moulded style/type. It meets the standards for ASME B107.600. In addition, it is made of alloy steel, has a SAE measurement type, is corrosion-resistant, has a black oxide finish, plus it is non-sparking, and is not tether ready with a non-slip grip. This multi-bit screwdriver includes two pieces.
This multi-bit screwdriver has a length of 6 inches and is not insulated. The multicomponent handle has a moulded style/type. It meets the standards for ASME B107.600. In addition, it is made of alloy steel, has a SAE measurement type, is corrosion-resistant, has a black oxide finish, plus it is non-sparking, and is not tether ready with a non-slip grip. This multi-bit screwdriver includes two pieces.
This multi-bit screwdriver has a length of 3¼ inches and is not insulated. The plastic, rubber handle has a moulded style/type. It meets the standards for ASME B107.600, TXF-702. In addition, it is made of alloy steel, has a SAE measurement type, is corrosion-resistant, has a black oxide bits, chrome shank finish, plus it is non-sparking, and is not tether ready with a non-slip grip. This multi-bit screwdriver includes six pieces.
This multi-bit screwdriver has a length of 3¼ inches and is not insulated. The plastic, rubber handle has a moulded style/type. It meets the standards for ASME B107.600, TXF-702. In addition, it is made of alloy steel, has a SAE measurement type, is corrosion-resistant, has a black oxide bits, chrome shank finish, plus it is non-sparking, and is not tether ready with a non-slip grip. This multi-bit screwdriver includes six pieces.
This multi-bit screwdriver has a length of 9 inches and is not insulated. The plastic, rubber handle has a moulded style/type. It meets the standards for ASME B107.600, TXF-702. In addition, it is made of alloy steel, has a SAE measurement type, is corrosion-resistant, has a black oxide bits, chrome shank finish, plus it is non-sparking, and is not tether ready with a non-slip grip. This multi-bit screwdriver includes adapter, 32 pieces.
This multi-bit screwdriver has a length of 9 inches and is not insulated. The plastic, rubber handle has a moulded style/type. It meets the standards for ASME B107.600, TXF-702. In addition, it is made of alloy steel, has a SAE measurement type, is corrosion-resistant, has a black oxide bits, chrome shank finish, plus it is non-sparking, and is not tether ready with a non-slip grip. This multi-bit screwdriver includes adapter, 32 pieces.
This multi-bit screwdriver has a length of 6¼ inches and is not insulated. The plastic, rubber handle has a moulded style/type. It meets the standards for ASME B107.600. In addition, it is made of alloy steel, has a SAE measurement type, is corrosion-resistant, has a black oxide bits, chrome shank finish, plus it is non-sparking, and is not tether ready with a non-slip grip. This multi-bit screwdriver includes four pieces.
This multi-bit screwdriver has a length of 6¼ inches and is not insulated. The plastic, rubber handle has a moulded style/type. It meets the standards for ASME B107.600. In addition, it is made of alloy steel, has a SAE measurement type, is corrosion-resistant, has a black oxide bits, chrome shank finish, plus it is non-sparking, and is not tether ready with a non-slip grip. This multi-bit screwdriver includes four pieces.
This multi-bit screwdriver has a length of 7 inches and is not insulated. The plastic, rubber handle has a moulded style/type. It meets the standards for ASME B107.600. In addition, it is made of alloy steel, has a SAE measurement type, is corrosion-resistant, has a black oxide finish, plus it is non-sparking, and is not tether ready with a non-slip grip. This multi-bit screwdriver includes two pieces.
This multi-bit screwdriver has a length of 7 inches and is not insulated. The plastic, rubber handle has a moulded style/type. It meets the standards for ASME B107.600. In addition, it is made of alloy steel, has a SAE measurement type, is corrosion-resistant, has a black oxide finish, plus it is non-sparking, and is not tether ready with a non-slip grip. This multi-bit screwdriver includes two pieces.
This multi-bit screwdriver has a length of 7¼ inches and is not insulated. The plastic handle has a straight style/type. It meets the standards for ASME B107.600. In addition, it is made of alloy steel, has a SAE measurement type, is corrosion-resistant, has a black oxide bits, chrome shank finish, plus it is non-sparking, and is not tether ready with an ergonomic grip. This multi-bit screwdriver includes nine pieces.
This multi-bit screwdriver has a length of 7¼ inches and is not insulated. The plastic handle has a straight style/type. It meets the standards for ASME B107.600. In addition, it is made of alloy steel, has a SAE measurement type, is corrosion-resistant, has a black oxide bits, chrome shank finish, plus it is non-sparking, and is not tether ready with an ergonomic grip. This multi-bit screwdriver includes nine pieces.
This multi-bit screwdriver has a length of 1½ inches and is not insulated. It meets the standards for ASME B107.600. In addition, it is made of alloy steel, has a SAE measurement type, is not corrosion-resistant, has a nickel-plated finish, plus it is non-sparking, and is not tether ready with a plain grip. This multi-bit screwdriver includes one piece.
This multi-bit screwdriver has a length of 1½ inches and is not insulated. It meets the standards for ASME B107.600. In addition, it is made of alloy steel, has a SAE measurement type, is not corrosion-resistant, has a nickel-plated finish, plus it is non-sparking, and is not tether ready with a plain grip. This multi-bit screwdriver includes one piece.
This multi-bit screwdriver has a length of 9¾ inches and is not insulated. The plastic, rubber handle has a moulded style/type. It meets the standards for TXF-702. In addition, it is made of alloy steel, has a SAE measurement type, is corrosion-resistant, has a black oxide bits, chrome shank finish, plus it is non-sparking, and is not tether ready with a non-slip grip. This multi-bit screwdriver includes 15 pieces.
This multi-bit screwdriver has a length of 9¾ inches and is not insulated. The plastic, rubber handle has a moulded style/type. It meets the standards for TXF-702. In addition, it is made of alloy steel, has a SAE measurement type, is corrosion-resistant, has a black oxide bits, chrome shank finish, plus it is non-sparking, and is not tether ready with a non-slip grip. This multi-bit screwdriver includes 15 pieces.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
