Jobber-Length Drill Bit Sets

Material High Speed Steel,Number of Pieces 26,Sizes Included A to Z,Finish TiN,List Number 150ASP-TN,Point Type Split.

Material High Speed Steel,Number of Pieces 26,Sizes Included A to Z,Finish TiN,List Number 150ASP-TN,Point Type Split.

Material High Speed Steel,Number of Pieces 60,Sizes Included #1 to #60,Finish TiN,List Number 150ASP-TN,Point Type Split.

Material High Speed Steel,Number of Pieces 60,Sizes Included #1 to #60,Finish TiN,List Number 150ASP-TN,Point Type Split.

Material Cobalt,Number of Pieces 19,Sizes Included 1.00 - 10.00 by 0.5,Finish Straw, M42 Cobalt,List Number 550ASP,Point Type Split.

Material Cobalt,Number of Pieces 19,Sizes Included 1.00 - 10.00 by 0.5,Finish Straw, M42 Cobalt,List Number 550ASP,Point Type Split.

Material High Speed Steel,Number of Pieces 115,Sizes Included 1/16 to 1/2 by 1/64, A to Z, #1 to #60,Finish TiN,List Number 150ASP-TN,Point Type Split.

Material High Speed Steel,Number of Pieces 115,Sizes Included 1/16 to 1/2 by 1/64, A to Z, #1 to #60,Finish TiN,List Number 150ASP-TN,Point Type Split.

Material High Speed Steel,Number of Pieces 20,Sizes Included #61 to #80,Finish TiN,List Number 150ASP-TN,Point Type Split.

Material High Speed Steel,Number of Pieces 20,Sizes Included #61 to #80,Finish TiN,List Number 150ASP-TN,Point Type Split.

This general purpose jobber drill bit set is made of high speed steel. It includes a metal drill index, sizes #1 to #5, #10 to #60, is designed for use with all materials, and meets the standards for ASME. This jobber length drill bit set has a black oxide finish, and has wire measurements. It is non-coolant through. Plus it has 60 spiral flutes, a straight shank, and 118 Degrees conventional point.

This general purpose jobber drill bit set is made of high speed steel. It includes a metal drill index, sizes #1 to #5, #10 to #60, is designed for use with all materials, and meets the standards for ASME. This jobber length drill bit set has a black oxide finish, and has wire measurements. It is non-coolant through. Plus it has 60 spiral flutes, a straight shank, and 118 Degrees conventional point.

This heavy-duty jobber drill bit set is made of high speed steel. It includes a metal drill index, sizes #1 to #5, #10 to #60, is designed for use with all materials, and meets the standards for NAS 907. This jobber length drill bit set has a black oxide finish, and has wire measurements. It is non-coolant through. Plus it has 60 spiral flutes, a straight shank, and a 135 Degrees split point.

This heavy-duty jobber drill bit set is made of high speed steel. It includes a metal drill index, sizes #1 to #5, #10 to #60, is designed for use with all materials, and meets the standards for NAS 907. This jobber length drill bit set has a black oxide finish, and has wire measurements. It is non-coolant through. Plus it has 60 spiral flutes, a straight shank, and a 135 Degrees split point.

This heavy-duty jobber drill bit set is made of cobalt. It includes a metal drill index, is designed for use with all materials, and meets the standards for NAS 907. This jobber length drill bit set has a straw/bronze finish, and has fractional inch measurements. It is non-coolant through. Plus it has 21 spiral flutes, a straight shank, and a 135 Degrees split point drill point.

This heavy-duty jobber drill bit set is made of cobalt. It includes a metal drill index, is designed for use with all materials, and meets the standards for NAS 907. This jobber length drill bit set has a straw/bronze finish, and has fractional inch measurements. It is non-coolant through. Plus it has 21 spiral flutes, a straight shank, and a 135 Degrees split point drill point.

This general purpose jobber drill bit set is made of high speed steel. It includes a metal drill index, sizes #1 to #5, #10 to #60, is designed for use with all materials, and meets the standards for ASME. This jobber length drill bit set has a TiN finish, and has wire measurements. It is non-coolant through. Plus it has 60 spiral flutes, a straight shank, and 118 Degrees conventional point.

This general purpose jobber drill bit set is made of high speed steel. It includes a metal drill index, sizes #1 to #5, #10 to #60, is designed for use with all materials, and meets the standards for ASME. This jobber length drill bit set has a TiN finish, and has wire measurements. It is non-coolant through. Plus it has 60 spiral flutes, a straight shank, and 118 Degrees conventional point.

This heavy-duty jobber drill bit set is made of cobalt. It includes a metal drill index, sizes A to Z, is designed for use with all materials, and meets the standards for NAS 907. This jobber length drill bit set has a straw/bronze finish, and has letter measurements. It is non-coolant through. Plus it has 26 spiral flutes, a straight shank, and a 135 Degrees split point drill point.

This heavy-duty jobber drill bit set is made of cobalt. It includes a metal drill index, sizes A to Z, is designed for use with all materials, and meets the standards for NAS 907. This jobber length drill bit set has a straw/bronze finish, and has letter measurements. It is non-coolant through. Plus it has 26 spiral flutes, a straight shank, and a 135 Degrees split point drill point.

Cet ensemble de forets courts robustes en acier rapide comprend un indice de foret métallique et convient à tous les matériaux. S/canal de refroidissement. De plus, il a 115 cannelures hélicoïdales, une tige droite et un angle de pointe de 135°.

Cet ensemble de forets courts robustes en acier rapide comprend un indice de foret métallique et convient à tous les matériaux. S/canal de refroidissement. De plus, il a 115 cannelures hélicoïdales, une tige droite et un angle de pointe de 135°.

Cet ensemble de forets courts robustes est en cobalt. Il comprend un index de foret métallique, les tailles 1/16, 1/2, 1/4, 1/8, 11/32, 13/32, 15/32, 3/16, 3/32, 3/8, 5/16, 5/32, 7/16, 7/32 po, convient à tous les matériaux et répond aux normes NAS 907 Type J. Cet ensemble a un fini TIN et des mesures fractionnaires en po. S/canal de refroidissement. De plus, il a 29 cannelures hélicoïdales, une tige droite et un angle de pointe de 135°.

Cet ensemble de forets courts robustes est en cobalt. Il comprend un index de foret métallique, les tailles 1/16, 1/2, 1/4, 1/8, 11/32, 13/32, 15/32, 3/16, 3/32, 3/8, 5/16, 5/32, 7/16, 7/32 po, convient à tous les matériaux et répond aux normes NAS 907 Type J. Cet ensemble a un fini TIN et des mesures fractionnaires en po. S/canal de refroidissement. De plus, il a 29 cannelures hélicoïdales, une tige droite et un angle de pointe de 135°.