Industrial Wall-Mount Fans

Air circulator, commercial, non-oscillating, unassembled, drive type direct, propeller dia 18 in, propeller material aluminum, CFM low 2460, CFM high 3480, 120 voltage, 60 Hz, 1 phase, operating amps 1.88/1.36, motor type permanent split capacitor, motor

Air circulator, commercial, non-oscillating, unassembled, drive type direct, propeller dia 18 in, propeller material aluminum, CFM low 2460, CFM high 3480, 120 voltage, 60 Hz, 1 phase, operating amps 1.88/1.36, motor type permanent split capacitor, motor

Air Circulator, Ind., Non-oscillating, Unassembled, Direct Drive Type, Propeller Dia. (In.) 20, CFM Low 1657, CFM Med. 2060, CFM High 3100, Air Velocity (FPM) at 20 Ft. 275, Voltage 115V, 60 Hz, 1 Phase, Motor Enclosure Totally Enclosed Air Over, Spd.s 3,

Air Circulator, Ind., Non-oscillating, Unassembled, Direct Drive Type, Propeller Dia. (In.) 20, CFM Low 1657, CFM Med. 2060, CFM High 3100, Air Velocity (FPM) at 20 Ft. 275, Voltage 115V, 60 Hz, 1 Phase, Motor Enclosure Totally Enclosed Air Over, Spd.s 3,

This industrial fan includes assembly hardware, secondary safety support cable, wall mounting bracket, and is made of steel. It measures 27 inch width, 27 inch height, 24 inch depth, with a 10-foot cord. This industrial fan has one phase, is 115 volts AC, is wall mountable, has three speeds, is direct drive, has ball bearings, 2,280/4,320/5,030 cfm air flow, 2.0/1.6/0.6 Amps, 250/190/70, 69.4/65.¼8.6 dBA, and 60 Hz, and ¼ horsepower.

This industrial fan includes assembly hardware, secondary safety support cable, wall mounting bracket, and is made of steel. It measures 27 inch width, 27 inch height, 24 inch depth, with a 10-foot cord. This industrial fan has one phase, is 115 volts AC, is wall mountable, has three speeds, is direct drive, has ball bearings, 2,280/4,320/5,030 cfm air flow, 2.0/1.6/0.6 Amps, 250/190/70, 69.4/65.¼8.6 dBA, and 60 Hz, and ¼ horsepower.

Air Circulator, Blade Dia. 30 In., Stationary, Non-Oscillating, Speeds 1, Voltage 277V, 1 Phase, CFM High 9340, Air Velocity (FPM) @ 20 Ft. 750, Motor HP 1/2, Motor RPM 1075, Operating Amps 1.4, Mounting Location Wall, Fan RPM 1075, Industrial, Assembled

Air Circulator, Blade Dia. 30 In., Stationary, Non-Oscillating, Speeds 1, Voltage 277V, 1 Phase, CFM High 9340, Air Velocity (FPM) @ 20 Ft. 750, Motor HP 1/2, Motor RPM 1075, Operating Amps 1.4, Mounting Location Wall, Fan RPM 1075, Industrial, Assembled

This industrial fan includes secondary support cable, wall bracket, and is made of steel. It measures 27 inch width, 34 inch height, 23½ inch depth. This industrial fan has one phase, is 115/230 volts AC, is wall mountable, has one speed, is direct drive, has ball bearings, 5,486 cfm air flow, 6.0/2.9 Amps, 353, 76 dBA, and 60 Hz, and ¼ horsepower.

This industrial fan includes secondary support cable, wall bracket, and is made of steel. It measures 27 inch width, 34 inch height, 23½ inch depth. This industrial fan has one phase, is 115/230 volts AC, is wall mountable, has one speed, is direct drive, has ball bearings, 5,486 cfm air flow, 6.0/2.9 Amps, 353, 76 dBA, and 60 Hz, and ¼ horsepower.

This industrial fan includes secondary support cable, wall bracket, and is made of steel. It measures 39 inch width, 39 inch height, 25¾ inch depth. This industrial fan has one phase, is 115/230 volts AC, is wall mountable, has one speed, is direct drive, has ball bearings, 12,500 cfm air flow, 7.0/3.5 Amps, 701, 82 dBA, and 60 Hz, and ¾ horsepower.

This industrial fan includes secondary support cable, wall bracket, and is made of steel. It measures 39 inch width, 39 inch height, 25¾ inch depth. This industrial fan has one phase, is 115/230 volts AC, is wall mountable, has one speed, is direct drive, has ball bearings, 12,500 cfm air flow, 7.0/3.5 Amps, 701, 82 dBA, and 60 Hz, and ¾ horsepower.

Washdown Air Circulator, Blade Dia. 30 In., Stationary, Non-Oscillating, Speeds 1, Voltage 115/230, 1 Phase, CFM High 8,800, CFM Low -, Air Velocity (FPM) @ 20 Ft. 595, Motor HP 1/3, Motor RPM 1075, Operating Amps 3.70/1.88, Mounting Location Wall, Fan RPM 1075, Commercial, Assembled Assembled, CFM/Watt 25.21, Outside Dia. 33 In., Includes Stainless Steel Wall Bracket, Mounting Bolts and Secondary Safety Support Cable

Washdown Air Circulator, Blade Dia. 30 In., Stationary, Non-Oscillating, Speeds 1, Voltage 115/230, 1 Phase, CFM High 8,800, CFM Low -, Air Velocity (FPM) @ 20 Ft. 595, Motor HP 1/3, Motor RPM 1075, Operating Amps 3.70/1.88, Mounting Location Wall, Fan RPM 1075, Commercial, Assembled Assembled, CFM/Watt 25.21, Outside Dia. 33 In., Includes Stainless Steel Wall Bracket, Mounting Bolts and Secondary Safety Support Cable

This standard-duty industrial fan includes mounting bolts, mounting device, secondary safety support cable, and is made of steel. It is grey, measures 39 inch width, 46½ inch height, 34⅜ inch depth, with a 10-foot cord. This standard-duty industrial fan has one phase, is 115 volts AC, is ceiling, post, wall mountable, has two speeds, is direct drive, has ball bearings, 8,100/12,600 cfm air flow, 4.2/3.9 Amps, 470/360, 79 dBA, and 60 Hz, and ½ horsepower.

This standard-duty industrial fan includes mounting bolts, mounting device, secondary safety support cable, and is made of steel. It is grey, measures 39 inch width, 46½ inch height, 34⅜ inch depth, with a 10-foot cord. This standard-duty industrial fan has one phase, is 115 volts AC, is ceiling, post, wall mountable, has two speeds, is direct drive, has ball bearings, 8,100/12,600 cfm air flow, 4.2/3.9 Amps, 470/360, 79 dBA, and 60 Hz, and ½ horsepower.

Provide constant temperatures. Designed for horizontal air flow that can assist with elimination of hot and cold spots throughout the building, condensation problems, and heat loss since stratification of warmer air is practically non-existent.

Provide constant temperatures. Designed for horizontal air flow that can assist with elimination of hot and cold spots throughout the building, condensation problems, and heat loss since stratification of warmer air is practically non-existent.

Quiet Dsgn. Air Circulator, Quiet Dsgn., Oscillating, Unassembled, Direct Drive Type, Propeller Dia. (In.) 30, CFM Low 4063, CFM Med. 5859, CFM High 7996, Air Velocity (FPM) at 20 Ft. 600/480/360, Voltage 115V, 60 Hz, 1 Phase, Motor Enclosure Totally Encl

Quiet Dsgn. Air Circulator, Quiet Dsgn., Oscillating, Unassembled, Direct Drive Type, Propeller Dia. (In.) 30, CFM Low 4063, CFM Med. 5859, CFM High 7996, Air Velocity (FPM) at 20 Ft. 600/480/360, Voltage 115V, 60 Hz, 1 Phase, Motor Enclosure Totally Encl

This industrial fan includes assembly hardware, secondary safety support cable, wall mounting bracket, and is made of steel. It measures 33½ inch width, 33½ inch height, 24 inch depth, with a 10-foot cord. This industrial fan has one phase, is 115 volts AC, is wall mountable, has three speeds, is direct drive, has ball bearings, 3,450/6,090/7,450 cfm air flow, 2.2/1.6/0.6 Amps, 245/185/70, 67.9/64.4/50.3 dBA, and 60 Hz, and ¼ horsepower.

This industrial fan includes assembly hardware, secondary safety support cable, wall mounting bracket, and is made of steel. It measures 33½ inch width, 33½ inch height, 24 inch depth, with a 10-foot cord. This industrial fan has one phase, is 115 volts AC, is wall mountable, has three speeds, is direct drive, has ball bearings, 3,450/6,090/7,450 cfm air flow, 2.2/1.6/0.6 Amps, 245/185/70, 67.9/64.4/50.3 dBA, and 60 Hz, and ¼ horsepower.

Air Circulator, Blade Dia. 18 In., Stationary, Oscillating, Speeds 2, Voltage 120, 1 Phase, CFM High 5700, CFM Low 4000, Air Velocity (FPM) @ 20 Ft. 272/230, Motor HP 1/5, Motor RPM 1101/1019, Operating Amps 1.83/1.27, Mounting Location Wall, Fan RPM 1101

Air Circulator, Blade Dia. 18 In., Stationary, Oscillating, Speeds 2, Voltage 120, 1 Phase, CFM High 5700, CFM Low 4000, Air Velocity (FPM) @ 20 Ft. 272/230, Motor HP 1/5, Motor RPM 1101/1019, Operating Amps 1.83/1.27, Mounting Location Wall, Fan RPM 1101

This industrial fan includes secondary support cable, wall bracket, and is made of steel. It measures 33 inch width, 37 inch height, 25¾ inch depth. This industrial fan has one phase, is 115/230 volts AC, is wall mountable, has one speed, is direct drive, has ball bearings, 10,937 cfm air flow, 7.0/3.5 Amps, 701, 80 dBA, and 60 Hz, and ¾ horsepower.

This industrial fan includes secondary support cable, wall bracket, and is made of steel. It measures 33 inch width, 37 inch height, 25¾ inch depth. This industrial fan has one phase, is 115/230 volts AC, is wall mountable, has one speed, is direct drive, has ball bearings, 10,937 cfm air flow, 7.0/3.5 Amps, 701, 80 dBA, and 60 Hz, and ¾ horsepower.

Air Circulator, Ind., Oscillating, Unassembled, Direct Drive Type, Propeller Dia. (In.) 18, CFM Low 1805, CFM Med. 2113, CFM High 2600, Air Velocity (FPM) at 20 Ft. 230, Voltage 115V, 60 Hz, 1 Phase, Motor Enclosure Totally Enclosed Air Over, Spd.s 3, No. of Blades 3, Mounting Location Wall.

Air Circulator, Ind., Oscillating, Unassembled, Direct Drive Type, Propeller Dia. (In.) 18, CFM Low 1805, CFM Med. 2113, CFM High 2600, Air Velocity (FPM) at 20 Ft. 230, Voltage 115V, 60 Hz, 1 Phase, Motor Enclosure Totally Enclosed Air Over, Spd.s 3, No. of Blades 3, Mounting Location Wall.

Assembled washdown duty air circulator head, 24 inches. Totally enclosed 115/230 V , 60HZ motor, 1/3 HP 1700 RPM, single speed, 6038 CFM.

Assembled washdown duty air circulator head, 24 inches. Totally enclosed 115/230 V , 60HZ motor, 1/3 HP 1700 RPM, single speed, 6038 CFM.