Product ITEM is unavailable. See products from the same category below.
Hybrid Utility Drill Bits for Fast Rough-In Cutting
Hybrid utility drill bits have three cutting spurs for fast hole drilling with minimal breakout. They can drill through nails and are commonly used for framing applications. The bits have three open flutes that eject chips efficiently and help prevent the bits from binding during drilling. They also have a self-feeding screw-point tip that pulls them into the workpiece and helps prevent them from moving, or walking, during drilling. Wire-fishing holes near the bits' tip allow wires to be pulled through surfaces after drilling.
This wood drilling bit set is made of carbon steel and has a ¼ inch diameter shank. It includes sizes ⅝ inch, ¾ inch, 1 inch This wood drilling bit set has a bright (uncoated) finish, and has fractional inch measurements. It has a six-inch length. Plus it has regular spiral flutes, a straight shank, a right hand cutting direction, and a full-cone threaded tip drill point.
This wood drilling bit set is made of carbon steel and has a ¼ inch diameter shank. It includes sizes ⅝ inch, ¾ inch, 1 inch This wood drilling bit set has a bright (uncoated) finish, and has fractional inch measurements. It has a six-inch length. Plus it has regular spiral flutes, a straight shank, a right hand cutting direction, and a full-cone threaded tip drill point.
Three cutting edges for added durability. Full screw tip allows bit to self feed. Tri-flute design for faster chip ejection. Hex groove shank fits standard 1/4 inch quick change chucks, 1/2 inch diameter.
Three cutting edges for added durability. Full screw tip allows bit to self feed. Tri-flute design for faster chip ejection. Hex groove shank fits standard 1/4 inch quick change chucks, 1/2 inch diameter.
Three cutting edges for added durability. Full screw tip allows bit to self feed. Tri-flute design for faster chip ejection. Hex groove shank fits standard 1/4 inch quick change chucks, 3/4 inch diameter.
Three cutting edges for added durability. Full screw tip allows bit to self feed. Tri-flute design for faster chip ejection. Hex groove shank fits standard 1/4 inch quick change chucks, 3/4 inch diameter.
This wood drilling bit is made of carbon steel and has a ⅜ inch diameter shank. It is designed for use with wood. This drill bit has a bright (uncoated) finish, and has fractional inch measurements. It has a six-inch length. Plus it has three 2⅞ inch flutes, a straight shank, a right hand cutting direction, and a screw point drill point.
This wood drilling bit is made of carbon steel and has a ⅜ inch diameter shank. It is designed for use with wood. This drill bit has a bright (uncoated) finish, and has fractional inch measurements. It has a six-inch length. Plus it has three 2⅞ inch flutes, a straight shank, a right hand cutting direction, and a screw point drill point.
This wood drilling bit is made of carbon steel and has a ¼ inch diameter shank. It is designed for use with wood. This drill bit has a bright (uncoated) finish, and has fractional inch measurements. It has a six-inch length. Plus it has three 1⅞ inch flutes, a straight shank, a right hand cutting direction, and a screw point drill point.
This wood drilling bit is made of carbon steel and has a ¼ inch diameter shank. It is designed for use with wood. This drill bit has a bright (uncoated) finish, and has fractional inch measurements. It has a six-inch length. Plus it has three 1⅞ inch flutes, a straight shank, a right hand cutting direction, and a screw point drill point.
Three cutting edges for added durability. Full screw tip allows bit to self feed. Tri-flute design for faster chip ejection. Hex groove shank fits standard 1/4 inch quick change chucks, 5/8 inch diameter.
Three cutting edges for added durability. Full screw tip allows bit to self feed. Tri-flute design for faster chip ejection. Hex groove shank fits standard 1/4 inch quick change chucks, 5/8 inch diameter.
This wood drilling bit is made of carbon steel and has a ¼ inch diameter shank. It is designed for use with wood. This drill bit has a bright (uncoated) finish, and has fractional inch measurements. It has a six-inch length. Plus it has three 2¼ inch flutes, a straight shank, a right hand cutting direction, and a screw point drill point.
This wood drilling bit is made of carbon steel and has a ¼ inch diameter shank. It is designed for use with wood. This drill bit has a bright (uncoated) finish, and has fractional inch measurements. It has a six-inch length. Plus it has three 2¼ inch flutes, a straight shank, a right hand cutting direction, and a screw point drill point.
This wood drilling bit is made of carbon steel and has a ¼ inch diameter shank. It is designed for use with wood. This drill bit has a bright (uncoated) finish, and has fractional inch measurements. It has a six-inch length. Plus it has three 2⅞ inch flutes, a straight shank, a right hand cutting direction, and a screw point drill point.
This wood drilling bit is made of carbon steel and has a ¼ inch diameter shank. It is designed for use with wood. This drill bit has a bright (uncoated) finish, and has fractional inch measurements. It has a six-inch length. Plus it has three 2⅞ inch flutes, a straight shank, a right hand cutting direction, and a screw point drill point.
This wood drilling bit is made of carbon steel and has a ¼ inch diameter shank. It is designed for use with wood. This drill bit has a bright (uncoated) finish, and has fractional inch measurements. It has a six-inch length. Plus it has three 1¾ inch flutes, a straight shank, a right hand cutting direction, and a screw point drill point.
This wood drilling bit is made of carbon steel and has a ¼ inch diameter shank. It is designed for use with wood. This drill bit has a bright (uncoated) finish, and has fractional inch measurements. It has a six-inch length. Plus it has three 1¾ inch flutes, a straight shank, a right hand cutting direction, and a screw point drill point.
This wood boring bit is made of carbon steel and has a ⅜ inch diameter shank. It is designed for use with wood. This wood boring bit has a bright (uncoated) finish, and has fractional inch measurements. It has a six-inch length. Plus it has three 2⅞ inch flutes, a straight shank, a right hand cutting direction, and a screw point drill point.
This wood boring bit is made of carbon steel and has a ⅜ inch diameter shank. It is designed for use with wood. This wood boring bit has a bright (uncoated) finish, and has fractional inch measurements. It has a six-inch length. Plus it has three 2⅞ inch flutes, a straight shank, a right hand cutting direction, and a screw point drill point.
This wood boring bit is made of carbon steel and has a ¼ inch diameter shank. It is designed for use with wood. This wood boring bit has a bright (uncoated) finish, and has fractional inch measurements. It has a six-inch length. Plus it has three 2½ inch flutes, a straight shank, a right hand cutting direction, and a screw point drill point.
This wood boring bit is made of carbon steel and has a ¼ inch diameter shank. It is designed for use with wood. This wood boring bit has a bright (uncoated) finish, and has fractional inch measurements. It has a six-inch length. Plus it has three 2½ inch flutes, a straight shank, a right hand cutting direction, and a screw point drill point.
Three cutting edges for added durability. Full screw tip allows bit to self feed. Tri-flute design for faster chip ejection. Hex groove shank fits standard 1/4 inch quick change chucks, 1 inch diameter.
Three cutting edges for added durability. Full screw tip allows bit to self feed. Tri-flute design for faster chip ejection. Hex groove shank fits standard 1/4 inch quick change chucks, 1 inch diameter.
This wood boring bit is made of carbon steel and has a ¼ inch diameter shank. It is designed for use with wood. This wood boring bit has a bright (uncoated) finish, and has fractional inch measurements. It has a six-inch length. Plus it has three 2¾ inch flutes, a straight shank, a right hand cutting direction, and a screw point drill point.
This wood boring bit is made of carbon steel and has a ¼ inch diameter shank. It is designed for use with wood. This wood boring bit has a bright (uncoated) finish, and has fractional inch measurements. It has a six-inch length. Plus it has three 2¾ inch flutes, a straight shank, a right hand cutting direction, and a screw point drill point.
Three cutting edges for added durability. Full screw tip allows bit to self feed. Tri-flute design for faster chip ejection. Hex groove shank fits standard 1/4 inch quick change chucks, 7/8 inch diameter.
Three cutting edges for added durability. Full screw tip allows bit to self feed. Tri-flute design for faster chip ejection. Hex groove shank fits standard 1/4 inch quick change chucks, 7/8 inch diameter.
Three cutting edges for added durability. Full screw tip allows bit to self feed. Tri-flute design for faster chip ejection. Hex groove shank fits standard 1/4 inch quick change chucks, 1-1/4 inch diameter.
Three cutting edges for added durability. Full screw tip allows bit to self feed. Tri-flute design for faster chip ejection. Hex groove shank fits standard 1/4 inch quick change chucks, 1-1/4 inch diameter.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
