Hole Making Punches

This hollow punch set has a length of ¾ inch, 1 inch, 1½ inch, 2 inch, 2¼ inch, 2½ inch, plus it weighs 0.015 lb, 0.016 lb, 0.02 lb, 0.021 lb, 0.022 lb, 0.045 lb, 0.048 lb, 0.051 lb, 0.053 lb, 0.07 and more. It features dual cutting heads allow for punching concentric circles in one strike. In addition, it is made of steel, has a metric measurement type, and is not tether ready with a knurled grip. This hollow punch set is designed for: cloth, gasket metal, leather, light sheet metal, vinyl.

This hollow punch set has a length of ¾ inch, 1 inch, 1½ inch, 2 inch, 2¼ inch, 2½ inch, plus it weighs 0.015 lb, 0.016 lb, 0.02 lb, 0.021 lb, 0.022 lb, 0.045 lb, 0.048 lb, 0.051 lb, 0.053 lb, 0.07 and more. It features dual cutting heads allow for punching concentric circles in one strike. In addition, it is made of steel, has a metric measurement type, and is not tether ready with a knurled grip. This hollow punch set is designed for: cloth, gasket metal, leather, light sheet metal, vinyl.

This hollow punch has a length of ¾ inch, plus it weighs 0.022 pounds and is not insulated. It features dual cutting heads allows the user to punch concentric circles in one strike. In addition, it is made of steel, has a SAE measurement type, has a black oxide finish, and is not tether ready with a plain grip. This hollow punch is designed for: cloth, gasket metal, light sheet metal, vinyl.

This hollow punch has a length of ¾ inch, plus it weighs 0.022 pounds and is not insulated. It features dual cutting heads allows the user to punch concentric circles in one strike. In addition, it is made of steel, has a SAE measurement type, has a black oxide finish, and is not tether ready with a plain grip. This hollow punch is designed for: cloth, gasket metal, light sheet metal, vinyl.

This hollow punch has a length of 2¼ inch, plus it weighs 0.2 pounds and is not insulated. It features dual cutting heads allows the user to punch concentric circles in one strike. In addition, it is made of steel, has a SAE measurement type, has a black oxide finish, and is not tether ready with a plain grip. This hollow punch is designed for: cloth, gasket metal, light sheet metal, vinyl.

This hollow punch has a length of 2¼ inch, plus it weighs 0.2 pounds and is not insulated. It features dual cutting heads allows the user to punch concentric circles in one strike. In addition, it is made of steel, has a SAE measurement type, has a black oxide finish, and is not tether ready with a plain grip. This hollow punch is designed for: cloth, gasket metal, light sheet metal, vinyl.

Barrel-type drift pinch Top diameter 11/16 inch. Bottom diameter 5/16 inch. Height 7-1/2 inch. Taper is uniform and blend into body diameter. Tough, drop forged steel, will properly end-pein in use.

Barrel-type drift pinch Top diameter 11/16 inch. Bottom diameter 5/16 inch. Height 7-1/2 inch. Taper is uniform and blend into body diameter. Tough, drop forged steel, will properly end-pein in use.

This bull pin has a length of 12 inch, plus it weighs 2.5 pounds. It features broad head for larger striking surface and meets the standards for OSHA 1926.301. In addition, it is made of alloy steel, has a SAE measurement type, is corrosion-resistant, and has a black oxide finish.

This bull pin has a length of 12 inch, plus it weighs 2.5 pounds. It features broad head for larger striking surface and meets the standards for OSHA 1926.301. In addition, it is made of alloy steel, has a SAE measurement type, is corrosion-resistant, and has a black oxide finish.

This centre punch has a length of 5½ inch. It features precision ground point. In addition, it is made of steel.

This centre punch has a length of 5½ inch. It features precision ground point. In addition, it is made of steel.

This snap lock punch has a length of 9 inch, plus it weighs 0.75 pounds. The handle is red. It features economical and rugged, punch raises a high projection to compensate for natural relaxation of and more. In addition, it is made of steel. This snap lock punch is designed for: snap lock plastic skirting and siding to finishing trim.

This snap lock punch has a length of 9 inch, plus it weighs 0.75 pounds. The handle is red. It features economical and rugged, punch raises a high projection to compensate for natural relaxation of and more. In addition, it is made of steel. This snap lock punch is designed for: snap lock plastic skirting and siding to finishing trim.

This hollow punch has a length of 2 inch, plus it weighs 0.154 pounds and is not insulated. It features dual cutting heads allows the user to punch concentric circles in one strike. In addition, it is made of steel, has a SAE measurement type, has a black oxide finish, and is not tether ready with a plain grip. This hollow punch is designed for: cloth, gasket metal, light sheet metal, vinyl.

This hollow punch has a length of 2 inch, plus it weighs 0.154 pounds and is not insulated. It features dual cutting heads allows the user to punch concentric circles in one strike. In addition, it is made of steel, has a SAE measurement type, has a black oxide finish, and is not tether ready with a plain grip. This hollow punch is designed for: cloth, gasket metal, light sheet metal, vinyl.

This centre punch has a length of five inches. It features precision ground point. In addition, it is made of steel.

This centre punch has a length of five inches. It features precision ground point. In addition, it is made of steel.

1/2 inch arch punch. Used for punching round holes in gasket material, leather, rubber, canvas, cardboard, plastic, sheet metal and other soft materials. This fine quality tool is forged and heat-treated for long life and the cutting edges will stay sharper longer.

1/2 inch arch punch. Used for punching round holes in gasket material, leather, rubber, canvas, cardboard, plastic, sheet metal and other soft materials. This fine quality tool is forged and heat-treated for long life and the cutting edges will stay sharper longer.

1 inch arch punch. Used for punching round holes in gasket material, leather, rubber, canvas, cardboard, plastic, sheet metal and other soft materials. This fine quality tool is forged and heat-treated for long life and the cutting edges will stay sharper longer.

1 inch arch punch. Used for punching round holes in gasket material, leather, rubber, canvas, cardboard, plastic, sheet metal and other soft materials. This fine quality tool is forged and heat-treated for long life and the cutting edges will stay sharper longer.

This hollow punch set has a length of ¾ inch, 1 inch, 1½ inch, 1¾ inch, 2¼ inch, 2¾ inch, 4½ inch, 1½ inch, 1¼ inch, 1⅛in, 1 11/16 inch, 1 3/16 inch, 1¾ inch, 1 5/16 i and more, 36 pieces.

This hollow punch set has a length of ¾ inch, 1 inch, 1½ inch, 1¾ inch, 2¼ inch, 2¾ inch, 4½ inch, 1½ inch, 1¼ inch, 1⅛in, 1 11/16 inch, 1 3/16 inch, 1¾ inch, 1 5/16 i and more, 36 pieces.

This hollow punch has a length of 1½ inch, plus it weighs 0.09 pounds and is not insulated. It features dual cutting heads allows the user to punch concentric circles in one strike. In addition, it is made of steel, has a metric measurement type, has a black oxide finish, and is not tether ready with a plain grip. This hollow punch is designed for: cloth, gasket metal, light sheet metal, vinyl.

This hollow punch has a length of 1½ inch, plus it weighs 0.09 pounds and is not insulated. It features dual cutting heads allows the user to punch concentric circles in one strike. In addition, it is made of steel, has a metric measurement type, has a black oxide finish, and is not tether ready with a plain grip. This hollow punch is designed for: cloth, gasket metal, light sheet metal, vinyl.

This hollow punch has a length of 2 inch, plus it weighs 0.154 pounds and is not insulated. It features dual cutting heads allows the user to punch concentric circles in one strike. In addition, it is made of steel, has a metric measurement type, has a black oxide finish, and is not tether ready with a plain grip. This hollow punch is designed for: cloth, gasket metal, light sheet metal, vinyl.

This hollow punch has a length of 2 inch, plus it weighs 0.154 pounds and is not insulated. It features dual cutting heads allows the user to punch concentric circles in one strike. In addition, it is made of steel, has a metric measurement type, has a black oxide finish, and is not tether ready with a plain grip. This hollow punch is designed for: cloth, gasket metal, light sheet metal, vinyl.

This centre punch has a length of four inches. It features forged, one-piece steel construction for strength and durability, punch edge is ground to a p and more. In addition, it is made of steel, is corrosion-resistant, has a powder coated finish. This centre punch is designed for: sheet metal.

This centre punch has a length of four inches. It features forged, one-piece steel construction for strength and durability, punch edge is ground to a p and more. In addition, it is made of steel, is corrosion-resistant, has a powder coated finish. This centre punch is designed for: sheet metal.