High-Speed Steel Straight-Flute Hand Taps

This hand tap is made of high speed steel and has a 0.255 inch diameter, 1.3190 inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets ANSI standards. This 101 series hand tap has a black oxide finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2½ inch length. Plus it has four flutes and a straight shank.

This hand tap is made of high speed steel and has a 0.255 inch diameter, 1.3190 inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets ANSI standards. This 101 series hand tap has a black oxide finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2½ inch length. Plus it has four flutes and a straight shank.

This hand tap is made of high speed steel and has a 0.590 inch diameter, 2.0300 inch long shank. It is designed for use with all materials, and meets the standards for ANSI. This 101 series hand tap has a black oxide finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 4¼ inch length. Plus it has four flutes and a straight shank.

This hand tap is made of high speed steel and has a 0.590 inch diameter, 2.0300 inch long shank. It is designed for use with all materials, and meets the standards for ANSI. This 101 series hand tap has a black oxide finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 4¼ inch length. Plus it has four flutes and a straight shank.

This hand tap is made of high speed steel and has a 0.194 inch diameter, 1.3230 inch long shank. It is designed for use with all materials, and meets the standards for ANSI. This 102 series hand tap has a bright finish, and has pipe measurements. It is non-coolant through, has right hand direction with a 2⅜ inch length. Plus it has four flutes and a straight shank.

This hand tap is made of high speed steel and has a 0.194 inch diameter, 1.3230 inch long shank. It is designed for use with all materials, and meets the standards for ANSI. This 102 series hand tap has a bright finish, and has pipe measurements. It is non-coolant through, has right hand direction with a 2⅜ inch length. Plus it has four flutes and a straight shank.

This pipe tap is made of high speed steel and has a 9.68 mm diameter, 39mm long shank. It is designed for use with all materials, and meets the standards for ANSI. This 141 series pipe tap has a bright (uncoated) finish, and has metric measurements. It is non-coolant through, has right hand direction with a 74mm length. Plus it has four flutes and a straight shank.

This pipe tap is made of high speed steel and has a 9.68 mm diameter, 39mm long shank. It is designed for use with all materials, and meets the standards for ANSI. This 141 series pipe tap has a bright (uncoated) finish, and has metric measurements. It is non-coolant through, has right hand direction with a 74mm length. Plus it has four flutes and a straight shank.

This hand tap is made of high speed steel and has a 0.141 inch diameter, 1.3130 inch long shank. It is designed for use with all materials, and meets the standards for ANSI. This 102 series hand tap has a bright finish, and has pipe measurements. It is non-coolant through, has right hand direction with a 1¾ inch length. Plus it has three flutes and a straight shank.

This hand tap is made of high speed steel and has a 0.141 inch diameter, 1.3130 inch long shank. It is designed for use with all materials, and meets the standards for ANSI. This 102 series hand tap has a bright finish, and has pipe measurements. It is non-coolant through, has right hand direction with a 1¾ inch length. Plus it has three flutes and a straight shank.

This hand tap is made of high speed steel and has a 0.194 inch diameter, 1.3230 inch long shank. It is designed for use with all materials, and meets the standards for ANSI. This 102 series hand tap has a black oxide finish, and has pipe measurements. It is non-coolant through, has right hand direction with a 2⅜ inch length. Plus it has four flutes and a straight shank.

This hand tap is made of high speed steel and has a 0.194 inch diameter, 1.3230 inch long shank. It is designed for use with all materials, and meets the standards for ANSI. This 102 series hand tap has a black oxide finish, and has pipe measurements. It is non-coolant through, has right hand direction with a 2⅜ inch length. Plus it has four flutes and a straight shank.

This hand tap is made of high speed steel and has a 0.194 inch diameter, 1.3230 inch long shank. It is designed for use with all materials, and meets the standards for ANSI. This 102 series hand tap has a black oxide finish, and has pipe measurements. It is non-coolant through, has right hand direction with a 2⅜ inch length. Plus it has four flutes and a straight shank.

This hand tap is made of high speed steel and has a 0.194 inch diameter, 1.3230 inch long shank. It is designed for use with all materials, and meets the standards for ANSI. This 102 series hand tap has a black oxide finish, and has pipe measurements. It is non-coolant through, has right hand direction with a 2⅜ inch length. Plus it has four flutes and a straight shank.

This tap is made of high speed steel and has a 5.50mm diameter, 36 mm long shank. It is designed for use with all materials, and meets the standards for JIS. This 121 series tap has a black oxide finish, and has metric measurements. It is non-coolant through, has right hand direction with a 60 mm length. Plus it has three flutes and a straight shank.

This tap is made of high speed steel and has a 5.50mm diameter, 36 mm long shank. It is designed for use with all materials, and meets the standards for JIS. This 121 series tap has a black oxide finish, and has metric measurements. It is non-coolant through, has right hand direction with a 60 mm length. Plus it has three flutes and a straight shank.

This tap is made of high speed steel and has a 0.381 inch diameter, 1.5170 inch long shank. It is designed for use with all materials, and meets the standards for ANSI. This 101 series tap has a black oxide finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2-15/16 inch length. Plus it has four flutes and a straight shank.

This tap is made of high speed steel and has a 0.381 inch diameter, 1.5170 inch long shank. It is designed for use with all materials, and meets the standards for ANSI. This 101 series tap has a black oxide finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2-15/16 inch length. Plus it has four flutes and a straight shank.

This hand tap is made of high speed steel and has a 0.141 inch diameter, 1.1890 inch long shank. It is designed for use with all materials, and meets the standards for ANSI. This 102 series hand tap has a black oxide finish, and has pipe measurements. It is non-coolant through, has right hand direction with a 1⅞ inch length. Plus it has three flutes and a straight shank.

This hand tap is made of high speed steel and has a 0.141 inch diameter, 1.1890 inch long shank. It is designed for use with all materials, and meets the standards for ANSI. This 102 series hand tap has a black oxide finish, and has pipe measurements. It is non-coolant through, has right hand direction with a 1⅞ inch length. Plus it has three flutes and a straight shank.

This hand tap is made of high speed steel and has a 0.318 inch diameter, 1.3980 inch long shank. It is designed for use with all materials, and meets the standards for ANSI. This 101 series hand tap has a black oxide finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2-23/32 inch length. Plus it has four flutes and a straight shank.

This hand tap is made of high speed steel and has a 0.318 inch diameter, 1.3980 inch long shank. It is designed for use with all materials, and meets the standards for ANSI. This 101 series hand tap has a black oxide finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2-23/32 inch length. Plus it has four flutes and a straight shank.

This hand tap is made of high speed steel and has a 0.367 inch diameter, 1.5590 inch long shank. It is designed for use with all materials, and meets the standards for ANSI. This 101 series hand tap has a black oxide finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 3⅜ inch length. Plus it has four flutes and a straight shank.

This hand tap is made of high speed steel and has a 0.367 inch diameter, 1.5590 inch long shank. It is designed for use with all materials, and meets the standards for ANSI. This 101 series hand tap has a black oxide finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 3⅜ inch length. Plus it has four flutes and a straight shank.

This hand tap is made of high speed steel and has a 0.255 inch diameter, 1.3190 inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets ANSI standards. This 101 series hand tap has a bright finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2½ inch length. Plus it has four flutes and a straight shank.

This hand tap is made of high speed steel and has a 0.255 inch diameter, 1.3190 inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets ANSI standards. This 101 series hand tap has a bright finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2½ inch length. Plus it has four flutes and a straight shank.

This hand tap is made of high speed steel and has a 0.318 inch diameter, 1.3980 inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets ANSI standards. This 101 series hand tap has a bright finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2-23/32 inch length. Plus it has four flutes and a straight shank.

This hand tap is made of high speed steel and has a 0.318 inch diameter, 1.3980 inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets ANSI standards. This 101 series hand tap has a bright finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2-23/32 inch length. Plus it has four flutes and a straight shank.

This hand tap is made of high speed steel and has a 0.323 inch diameter, 1.4620 inch long shank. It is designed for use with all materials, and meets the standards for ANSI. This 101 series hand tap has a bright finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 3-5/32 inch length. Plus it has four flutes and a straight shank.

This hand tap is made of high speed steel and has a 0.323 inch diameter, 1.4620 inch long shank. It is designed for use with all materials, and meets the standards for ANSI. This 101 series hand tap has a bright finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 3-5/32 inch length. Plus it has four flutes and a straight shank.

This hand tap is made of high speed steel and has a 0.429 inch diameter, 1.6500 inch long shank. It is designed for use with all materials, and meets the standards for ANSI. This 101 series hand tap has a bright finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 3-19/32 inch length. Plus it has four flutes and a straight shank.

This hand tap is made of high speed steel and has a 0.429 inch diameter, 1.6500 inch long shank. It is designed for use with all materials, and meets the standards for ANSI. This 101 series hand tap has a bright finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 3-19/32 inch length. Plus it has four flutes and a straight shank.