Product ITEM is unavailable. See products from the same category below.
High-Speed Steel Straight-Flute Hand Taps
High-speed steel taps provide good wear resistance in general purpose tapping applications in a range of materials. Also called hand taps, high-speed steel straight-flute taps are turned with a tap wrench to create or repair internal threads in blind holes and through holes. As the taps are rotated into a hole to create threads, the chips move into the flutes but are not evacuated.
This bottom tap is made of high speed steel and has a 19.3mm diameter, 2.6870 inch long shank. It is designed for use with cast iron, stainless steel, steel, and meets the standards for USCTI. This HTGP-TN series bottom tap has a TiN finish, and has metric measurements. It has right hand direction with a 124.62 mm length. Plus it has four flutes and a straight shank.
This bottom tap is made of high speed steel and has a 19.3mm diameter, 2.6870 inch long shank. It is designed for use with cast iron, stainless steel, steel, and meets the standards for USCTI. This HTGP-TN series bottom tap has a TiN finish, and has metric measurements. It has right hand direction with a 124.62 mm length. Plus it has four flutes and a straight shank.
This hand tap is made of high speed steel and has a 10.9mm diameter, 1.9380 inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI. This HTGP series hand tap has a bright finish, and has metric measurements. It has right hand direction with a 3 19/32 inch length. Plus it has four flutes and a straight shank.
This hand tap is made of high speed steel and has a 10.9mm diameter, 1.9380 inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI. This HTGP series hand tap has a bright finish, and has metric measurements. It has right hand direction with a 3 19/32 inch length. Plus it has four flutes and a straight shank.
This hand tap is made of high speed steel and has a 0.318 inch diameter, 1.5940 inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI. This HTGP series hand tap has a bright finish, and has fractional inch measurements. It has right hand direction with a 2.72 inch length. Plus it has four flutes and a straight shank.
This hand tap is made of high speed steel and has a 0.318 inch diameter, 1.5940 inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI. This HTGP series hand tap has a bright finish, and has fractional inch measurements. It has right hand direction with a 2.72 inch length. Plus it has four flutes and a straight shank.
This hand tap is made of high speed steel and has a 0.896 inch diameter, 2⅞ inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI. This HTGP series hand tap has a bright finish, and has fractional inch measurements. It has right hand direction with a 5 7/16 inch length. Plus it has four flutes and a straight shank.
This hand tap is made of high speed steel and has a 0.896 inch diameter, 2⅞ inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI. This HTGP series hand tap has a bright finish, and has fractional inch measurements. It has right hand direction with a 5 7/16 inch length. Plus it has four flutes and a straight shank.
This hand tap is made of high speed steel and has a 0.8 inch diameter, 2⅝ inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI. This HTGP series hand tap has a bright finish, and has fractional inch measurements. It has right hand direction with a 5⅛ inch length. Plus it has four flutes and a straight shank.
This hand tap is made of high speed steel and has a 0.8 inch diameter, 2⅝ inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI. This HTGP series hand tap has a bright finish, and has fractional inch measurements. It has right hand direction with a 5⅛ inch length. Plus it has four flutes and a straight shank.
This hand tap is made of high speed steel and has a 0.697 inch diameter, 2.2490 inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI. This HTGP series hand tap has a bright finish, and has fractional inch measurements. It has right hand direction with a 4 11/16 inch length. Plus it has four flutes and a straight shank.
This hand tap is made of high speed steel and has a 0.697 inch diameter, 2.2490 inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI. This HTGP series hand tap has a bright finish, and has fractional inch measurements. It has right hand direction with a 4 11/16 inch length. Plus it has four flutes and a straight shank.
This hand tap is made of high speed steel and has a 3.58mm diameter, 1.3130 inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI. This HTGP series hand tap has a bright finish, and has metric measurements. It has right hand direction with a 1 5/16 inch length. Plus it has three flutes and a straight shank.
This hand tap is made of high speed steel and has a 3.58mm diameter, 1.3130 inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI. This HTGP series hand tap has a bright finish, and has metric measurements. It has right hand direction with a 1 5/16 inch length. Plus it has three flutes and a straight shank.
This hand tap is made of high speed steel and has a 4.27mm diameter, 1⅜ inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI. This HTGP series hand tap has a bright finish, and has metric measurements. It has right hand direction with a 2⅛ inch length. Plus it has four flutes and a straight shank.
This hand tap is made of high speed steel and has a 4.27mm diameter, 1⅜ inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI. This HTGP series hand tap has a bright finish, and has metric measurements. It has right hand direction with a 2⅛ inch length. Plus it has four flutes and a straight shank.
This hand tap is made of high speed steel and has a 8.08mm diameter, 1.5940 inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI. This HTGP series hand tap has a bright finish, and has metric measurements. It has right hand direction with a 3 19/32 inch length. Plus it has four flutes and a straight shank.
This hand tap is made of high speed steel and has a 8.08mm diameter, 1.5940 inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI. This HTGP series hand tap has a bright finish, and has metric measurements. It has right hand direction with a 3 19/32 inch length. Plus it has four flutes and a straight shank.
This hand tap is made of high speed steel and has a 0.141 inch diameter, 1.3120 inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI. This HTGP series hand tap has a bright finish, and has pipe measurements. It has right hand direction with a 1¾ inch length. Plus it has three flutes and a straight shank.
This hand tap is made of high speed steel and has a 0.141 inch diameter, 1.3120 inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI. This HTGP series hand tap has a bright finish, and has pipe measurements. It has right hand direction with a 1¾ inch length. Plus it has three flutes and a straight shank.
This hand tap is made of high speed steel and has a 0.141 inch diameter, 1.3130 inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI. This HTGP series hand tap has a bright finish, and has pipe measurements. It has right hand direction with a 1 13/16 inch length. Plus it has three flutes and a straight shank.
This hand tap is made of high speed steel and has a 0.141 inch diameter, 1.3130 inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI. This HTGP series hand tap has a bright finish, and has pipe measurements. It has right hand direction with a 1 13/16 inch length. Plus it has three flutes and a straight shank.
This hand tap is made of high speed steel and has a 0.323 inch diameter, 1.7180 inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI. This HTGP series hand tap has a bright finish, and has fractional inch measurements. It has right hand direction with a 3 5/32 inch length. Plus it has four flutes and a straight shank.
This hand tap is made of high speed steel and has a 0.323 inch diameter, 1.7180 inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI. This HTGP series hand tap has a bright finish, and has fractional inch measurements. It has right hand direction with a 3 5/32 inch length. Plus it has four flutes and a straight shank.
This taper is made of high speed steel and has a 3.58mm diameter, 1.3130 inch long shank. It is designed for use with cast iron, stainless steel, steel, and meets the standards for USCTI. This HTGP-TN series taper has a TiN finish, and has metric measurements. It has right hand direction with a 46.04mm length. Plus it has three flutes and a straight shank.
This taper is made of high speed steel and has a 3.58mm diameter, 1.3130 inch long shank. It is designed for use with cast iron, stainless steel, steel, and meets the standards for USCTI. This HTGP-TN series taper has a TiN finish, and has metric measurements. It has right hand direction with a 46.04mm length. Plus it has three flutes and a straight shank.
This hand tap is made of high speed steel and has a 0.542 inch diameter, 2.2180 inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI. This HTGP series hand tap has a bright finish, and has fractional inch measurements. It has right hand direction with a 4 1/32 inch length. Plus it has four flutes and a straight shank.
This hand tap is made of high speed steel and has a 0.542 inch diameter, 2.2180 inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI. This HTGP series hand tap has a bright finish, and has fractional inch measurements. It has right hand direction with a 4 1/32 inch length. Plus it has four flutes and a straight shank.
This hand tap is made of high speed steel and has a 0.59 inch diameter, 2¼ inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI. This HTGP series hand tap has a bright finish, and has fractional inch measurements. It has right hand direction with a 4¼ inch length. Plus it has four flutes and a straight shank.
This hand tap is made of high speed steel and has a 0.59 inch diameter, 2¼ inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI. This HTGP series hand tap has a bright finish, and has fractional inch measurements. It has right hand direction with a 4¼ inch length. Plus it has four flutes and a straight shank.
This hand tap is made of high speed steel and has a 0.59 inch diameter, 2¼ inch long shank. It is designed for use with cast iron, stainless steel, steel, and meets the standards for USCTI. This HTGP-TN series hand tap has a TiN finish, and has fractional inch measurements. It has right hand direction with a 4¼ inch length. Plus it has four flutes and a straight shank.
This hand tap is made of high speed steel and has a 0.59 inch diameter, 2¼ inch long shank. It is designed for use with cast iron, stainless steel, steel, and meets the standards for USCTI. This HTGP-TN series hand tap has a TiN finish, and has fractional inch measurements. It has right hand direction with a 4¼ inch length. Plus it has four flutes and a straight shank.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
