Product ITEM is unavailable. See products from the same category below.
Hex Keys
Hex keys have hexagonal (six-sided) tips that fit into the hexagonal-shaped (six-sided) indentation in the bolt or screwhead. The hex key is then turned to rotate the faster to tighten or loosen it. The hex key can be L-shaped with two arms of unequal length, one long and one short. The short end can reach fasteners in tight spaces while the long end extends the reach of the tool. Rotating a fastener using the long end as a handle provides more torque on the fastener compared to using the short end. T-shaped hex keys have one long arm with the drive tip at the end and a handle that can provide more torque when rotating fasteners compared to L-shaped keys.
This hex key is not insulated. The steel handle is 5¼ inch long, is black and has a straight style/type. It meets the standards for ASME B18.3. In addition, it is made of alloy steel, has a SAE measurement type, is corrosion-resistant, has a black oxide finish, plus it is not non-sparking, is not non-magnetic, and is not tether ready.
This hex key is not insulated. The steel handle is 5¼ inch long, is black and has a straight style/type. It meets the standards for ASME B18.3. In addition, it is made of alloy steel, has a SAE measurement type, is corrosion-resistant, has a black oxide finish, plus it is not non-sparking, is not non-magnetic, and is not tether ready.
This hex key is not insulated. The plastic handle is three inches long, is blue and has a plain style/type. It meets the standards for ASME B18.3. In addition, it is made of alloy steel, has a metric measurement type, is corrosion-resistant, has a black oxide finish, plus it is not non-sparking, is not non-magnetic, and is not tether ready with a plastic-coated grip.
This hex key is not insulated. The plastic handle is three inches long, is blue and has a plain style/type. It meets the standards for ASME B18.3. In addition, it is made of alloy steel, has a metric measurement type, is corrosion-resistant, has a black oxide finish, plus it is not non-sparking, is not non-magnetic, and is not tether ready with a plastic-coated grip.
This hex key is not insulated. The plastic handle is four inches long, is red and has a plain style/type. It meets the standards for ASME B18.3. In addition, it is made of alloy steel, has a SAE measurement type, is corrosion-resistant, has a black oxide finish, plus it is not non-sparking, is not non-magnetic, and is not tether ready with a plastic-coated grip.
This hex key is not insulated. The plastic handle is four inches long, is red and has a plain style/type. It meets the standards for ASME B18.3. In addition, it is made of alloy steel, has a SAE measurement type, is corrosion-resistant, has a black oxide finish, plus it is not non-sparking, is not non-magnetic, and is not tether ready with a plastic-coated grip.
This hex key is not insulated. The plastic handle is three inches long, is red and has a plain style/type. It meets the standards for ASME B18.3. In addition, it is made of alloy steel, has a SAE measurement type, is corrosion-resistant, has a black oxide finish, plus it is not non-sparking, is not non-magnetic, and is not tether ready with a plastic-coated grip.
This hex key is not insulated. The plastic handle is three inches long, is red and has a plain style/type. It meets the standards for ASME B18.3. In addition, it is made of alloy steel, has a SAE measurement type, is corrosion-resistant, has a black oxide finish, plus it is not non-sparking, is not non-magnetic, and is not tether ready with a plastic-coated grip.
This hex key is not insulated. The steel handle is 3¾ inch long, is black and has a straight style/type. It meets the standards for ASME B18.3. In addition, it is made of alloy steel, has a SAE measurement type, is corrosion-resistant, has a black oxide finish, plus it is not non-sparking, is not non-magnetic, and is not tether ready.
This hex key is not insulated. The steel handle is 3¾ inch long, is black and has a straight style/type. It meets the standards for ASME B18.3. In addition, it is made of alloy steel, has a SAE measurement type, is corrosion-resistant, has a black oxide finish, plus it is not non-sparking, is not non-magnetic, and is not tether ready.
This hex key is not insulated. The steel handle is 2 13/32 inch long, is black and has a plain style/type. It meets the standards for ANSI B18.3.2M. In addition, it is made of alloy steel, has a metric measurement type, is corrosion-resistant, has a black oxide finish, plus it is not non-sparking, is not non-magnetic, and is not tether ready.
This hex key is not insulated. The steel handle is 2 13/32 inch long, is black and has a plain style/type. It meets the standards for ANSI B18.3.2M. In addition, it is made of alloy steel, has a metric measurement type, is corrosion-resistant, has a black oxide finish, plus it is not non-sparking, is not non-magnetic, and is not tether ready.
This hex key is not insulated. The steel handle is 1⅝ inch long, is black and has a straight style/type. It meets the standards for ANSI B18.3.2M. In addition, it is made of alloy steel, has a metric measurement type, is corrosion-resistant, has a black oxide finish, plus it is not non-sparking, is not non-magnetic, and is not tether ready.
This hex key is not insulated. The steel handle is 1⅝ inch long, is black and has a straight style/type. It meets the standards for ANSI B18.3.2M. In addition, it is made of alloy steel, has a metric measurement type, is corrosion-resistant, has a black oxide finish, plus it is not non-sparking, is not non-magnetic, and is not tether ready.
This hex key is not insulated. The steel handle is 2 11/64 inch long, is black and has a straight style/type. It meets the standards for ANSI B18.3.2M. In addition, it is made of alloy steel, has a metric measurement type, is corrosion-resistant, has a black oxide finish, plus it is not non-sparking, is not non-magnetic, and is not tether ready.
This hex key is not insulated. The steel handle is 2 11/64 inch long, is black and has a straight style/type. It meets the standards for ANSI B18.3.2M. In addition, it is made of alloy steel, has a metric measurement type, is corrosion-resistant, has a black oxide finish, plus it is not non-sparking, is not non-magnetic, and is not tether ready.
This hex key is not insulated. The plastic handle is three inches long, is blue and has a plain style/type. It meets the standards for ASME B18.3. In addition, it is made of alloy steel, has a metric measurement type, is corrosion-resistant, has a black oxide finish, plus it is not non-sparking, is not non-magnetic, and is not tether ready with a plastic-coated grip.
This hex key is not insulated. The plastic handle is three inches long, is blue and has a plain style/type. It meets the standards for ASME B18.3. In addition, it is made of alloy steel, has a metric measurement type, is corrosion-resistant, has a black oxide finish, plus it is not non-sparking, is not non-magnetic, and is not tether ready with a plastic-coated grip.
This hex key is not insulated. The steel handle is 1¼ inch long, is black and has a straight style/type. It meets the standards for ASME B18.3. In addition, it is made of alloy steel, has a SAE measurement type, is corrosion-resistant, has a black oxide finish, plus it is not non-sparking, is not non-magnetic, and is not tether ready.
This hex key is not insulated. The steel handle is 1¼ inch long, is black and has a straight style/type. It meets the standards for ASME B18.3. In addition, it is made of alloy steel, has a SAE measurement type, is corrosion-resistant, has a black oxide finish, plus it is not non-sparking, is not non-magnetic, and is not tether ready.
This hex key is not insulated. The steel handle is 9/16 inch long, is black and has a plain style/type. It meets the standards for ASME B18.3. In addition, it is made of alloy steel, has a SAE measurement type, is corrosion-resistant, has a black oxide finish, plus it is not non-sparking, is not non-magnetic, and is not tether ready.
This hex key is not insulated. The steel handle is 9/16 inch long, is black and has a plain style/type. It meets the standards for ASME B18.3. In addition, it is made of alloy steel, has a SAE measurement type, is corrosion-resistant, has a black oxide finish, plus it is not non-sparking, is not non-magnetic, and is not tether ready.
This hex key is not insulated. The steel handle is 1⅜ inch long, is black and has a straight style/type. It meets the standards for ANSI B18.3.2M. In addition, it is made of alloy steel, has a metric measurement type, is corrosion-resistant, has a black oxide finish, plus it is not non-sparking, is not non-magnetic, and is not tether ready.
This hex key is not insulated. The steel handle is 1⅜ inch long, is black and has a straight style/type. It meets the standards for ANSI B18.3.2M. In addition, it is made of alloy steel, has a metric measurement type, is corrosion-resistant, has a black oxide finish, plus it is not non-sparking, is not non-magnetic, and is not tether ready.
This hex key is not insulated. The plastic handle is four inches long, is blue and has a plain style/type. It meets the standards for ASME B18.3. In addition, it is made of alloy steel, has a metric measurement type, is corrosion-resistant, has a black oxide finish, plus it is not non-sparking, is not non-magnetic, and is not tether ready with a plastic-coated grip.
This hex key is not insulated. The plastic handle is four inches long, is blue and has a plain style/type. It meets the standards for ASME B18.3. In addition, it is made of alloy steel, has a metric measurement type, is corrosion-resistant, has a black oxide finish, plus it is not non-sparking, is not non-magnetic, and is not tether ready with a plastic-coated grip.
This hex key is not insulated. The plastic handle is three inches long, is red and has a plain style/type. It meets the standards for ASME B18.3. In addition, it is made of alloy steel, has a SAE measurement type, is corrosion-resistant, has a black oxide finish, plus it is not non-sparking, is not non-magnetic, and is not tether ready with a plastic-coated grip.
This hex key is not insulated. The plastic handle is three inches long, is red and has a plain style/type. It meets the standards for ASME B18.3. In addition, it is made of alloy steel, has a SAE measurement type, is corrosion-resistant, has a black oxide finish, plus it is not non-sparking, is not non-magnetic, and is not tether ready with a plastic-coated grip.
This hex key is not insulated. The steel handle is 4 1/10 inch long, is black and has a plain style/type. It meets the standards for ASME B18.3. In addition, it is made of alloy steel, has a SAE measurement type, is corrosion-resistant, has a black oxide finish, plus it is not non-sparking, is not non-magnetic, and is not tether ready.
This hex key is not insulated. The steel handle is 4 1/10 inch long, is black and has a plain style/type. It meets the standards for ASME B18.3. In addition, it is made of alloy steel, has a SAE measurement type, is corrosion-resistant, has a black oxide finish, plus it is not non-sparking, is not non-magnetic, and is not tether ready.
This hex key is not insulated. The steel handle is 1⅝ inch long, is black and has a straight style/type. It meets the standards for ANSI B18.3.2M. In addition, it is made of alloy steel, has a metric measurement type, is corrosion-resistant, has a black oxide finish, plus it is not non-sparking, is not non-magnetic, and is not tether ready.
This hex key is not insulated. The steel handle is 1⅝ inch long, is black and has a straight style/type. It meets the standards for ANSI B18.3.2M. In addition, it is made of alloy steel, has a metric measurement type, is corrosion-resistant, has a black oxide finish, plus it is not non-sparking, is not non-magnetic, and is not tether ready.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
