Product ITEM is unavailable. See products from the same category below.
Hex Key Sets
Hex key sets have hexagonal (six-sided) tips that fit into the hexagonal (six-sided) indentation in the bolt or screwhead. The hex key is then turned to rotate the fastener to tighten or loosen it. Folding hex key sets contain multiple keys attached to one handle. Hex keys having tips with a hex ball end allow fasteners to be accessed from multiple angles in hard-to-reach areas. The hex keys can be L-shaped with two arms of unequal length, one long and one short. The short end can reach fasteners in tight spaces while the long end extends the reach of the tool. Rotating a fastener using the long end as a handle provides more torque on the fastener compared to using the short end. T-shaped hex key sets have one long arm with the drive tip at the end and a handle that can provide more torque when rotating fasteners compared to L-shaped keys. Sets come with an assortment of hex keys for a range of fastener head sizes.
This hex key set has a width of 3¾ inch, a height of 9⅜ inch, and a length of 9⅜ inches and is not insulated with an alloy steel handle. It meets the standards for ANSI B18.3.2M R-2008, ASME B18.3 R-2008, ISO2936:2001 C-2007. In addition, it is made of steel, has a metric measurement type, is not corrosion-resistant, has a satin finish, plus it is not non-sparking, is not non-magnetic, and is not tether ready with a plain grip. This hex key set includes nine pieces.
This hex key set has a width of 3¾ inch, a height of 9⅜ inch, and a length of 9⅜ inches and is not insulated with an alloy steel handle. It meets the standards for ANSI B18.3.2M R-2008, ASME B18.3 R-2008, ISO2936:2001 C-2007. In addition, it is made of steel, has a metric measurement type, is not corrosion-resistant, has a satin finish, plus it is not non-sparking, is not non-magnetic, and is not tether ready with a plain grip. This hex key set includes nine pieces.
This hex key set is not insulated with an alloy steel handle. It meets the standards for ANSI B18.3.2M R-2008, ASME B18.3 R-2008, ISO2936:2001 C-2007. In addition, it is made of steel, has a metric measurement type, is not corrosion-resistant, has a satin finish, plus it is not non-sparking, is not non-magnetic, and is not tether ready with a plain grip. This hex key set includes 12 pieces.
This hex key set is not insulated with an alloy steel handle. It meets the standards for ANSI B18.3.2M R-2008, ASME B18.3 R-2008, ISO2936:2001 C-2007. In addition, it is made of steel, has a metric measurement type, is not corrosion-resistant, has a satin finish, plus it is not non-sparking, is not non-magnetic, and is not tether ready with a plain grip. This hex key set includes 12 pieces.
This hex key set is not insulated with an alloy steel handle. It meets the standards for ANSI B18.3.2M R-2008, ASME B18.3 R-2008, ISO2936:2001 C-2007. In addition, it is made of steel, has a metric measurement type, is not corrosion-resistant, has a satin finish, plus it is not non-sparking, is not non-magnetic, and is not tether ready with a plain grip. This hex key set includes nine pieces.
This hex key set is not insulated with an alloy steel handle. It meets the standards for ANSI B18.3.2M R-2008, ASME B18.3 R-2008, ISO2936:2001 C-2007. In addition, it is made of steel, has a metric measurement type, is not corrosion-resistant, has a satin finish, plus it is not non-sparking, is not non-magnetic, and is not tether ready with a plain grip. This hex key set includes nine pieces.
This hex key set has a width of 3¾ inch, a height of 9⅜ inch, and a length of 9⅜ inches and is not insulated with an alloy steel handle. It meets the standards for ANSI B18.3.2M R-2008, ASME B18.3 R-2008, ISO2936:2001 C-2007. In addition, it is made of steel, has a metric measurement type, is not corrosion-resistant, has a satin finish, plus it is not non-sparking, is not non-magnetic, and is not tether ready with a plain grip. This hex key set includes nine pieces.
This hex key set has a width of 3¾ inch, a height of 9⅜ inch, and a length of 9⅜ inches and is not insulated with an alloy steel handle. It meets the standards for ANSI B18.3.2M R-2008, ASME B18.3 R-2008, ISO2936:2001 C-2007. In addition, it is made of steel, has a metric measurement type, is not corrosion-resistant, has a satin finish, plus it is not non-sparking, is not non-magnetic, and is not tether ready with a plain grip. This hex key set includes nine pieces.
This hex key set has a width of 5¼ inch, a height of 12¾ inch, and a length of 12¾ inches and is not insulated with an alloy steel handle. It meets the standards for ANSI B18.3.2M R-2008, ASME B18.3 R-2008, ISO2936:2001 C-2007. In addition, it is made of steel, has a metric measurement type, is not corrosion-resistant, has a satin finish, plus it is not non-sparking, is not non-magnetic, and is not tether ready with a plain grip. This hex key set includes 15 pieces.
This hex key set has a width of 5¼ inch, a height of 12¾ inch, and a length of 12¾ inches and is not insulated with an alloy steel handle. It meets the standards for ANSI B18.3.2M R-2008, ASME B18.3 R-2008, ISO2936:2001 C-2007. In addition, it is made of steel, has a metric measurement type, is not corrosion-resistant, has a satin finish, plus it is not non-sparking, is not non-magnetic, and is not tether ready with a plain grip. This hex key set includes 15 pieces.
This hex key set is not insulated with an alloy steel handle. It meets the standards for ANSI B18.3.2M R-2008, ASME B18.3 R-2008, ISO2936:2001 C-2007. In addition, it is made of steel, has a metric measurement type, is not corrosion-resistant, has a satin finish, plus it is not non-sparking, is not non-magnetic, and is not tether ready with a plain grip. This hex key set includes 15 pieces.
This hex key set is not insulated with an alloy steel handle. It meets the standards for ANSI B18.3.2M R-2008, ASME B18.3 R-2008, ISO2936:2001 C-2007. In addition, it is made of steel, has a metric measurement type, is not corrosion-resistant, has a satin finish, plus it is not non-sparking, is not non-magnetic, and is not tether ready with a plain grip. This hex key set includes 15 pieces.
This hex key set has a width of 4⅞ inch, a height of 12¼ inch, and a length of 12¼ inches and is not insulated with an alloy steel handle. It meets the standards for ANSI B18.3.2M R-2008, ASME B18.3 R-2008, ISO2936:2001 C-2007. In addition, it is made of steel, has a metric measurement type, is not corrosion-resistant, has a satin finish, plus it is not non-sparking, is not non-magnetic, and is not tether ready with a plain grip. This hex key set includes 12 pieces.
This hex key set has a width of 4⅞ inch, a height of 12¼ inch, and a length of 12¼ inches and is not insulated with an alloy steel handle. It meets the standards for ANSI B18.3.2M R-2008, ASME B18.3 R-2008, ISO2936:2001 C-2007. In addition, it is made of steel, has a metric measurement type, is not corrosion-resistant, has a satin finish, plus it is not non-sparking, is not non-magnetic, and is not tether ready with a plain grip. This hex key set includes 12 pieces.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
