Product ITEM is unavailable. See products from the same category below.
General Purpose Spiral-Point Taps
General purpose spiral-point taps are intended for threading a wide range of materials. The taps have straight flutes with a spiral point that pushes chips in front of the tap as it moves into a hole and out the other side, eventually forcing the chips out of the hole. They create internal threads in through holes and are installed into a toolholder on a machine such as a lathe or CNC machine to operate.
This tap is made of high speed steel and has a 0.381 inch diameter, 1.6880 inch long shank. It is designed for use with all materials, and meets the standards for USCTI 302. This SPGP series tap has a bright finish, and has fractional inch measurements. It has right hand direction with a 2-15/16 inch length. Plus it has three flutes and a straight shank.
This tap is made of high speed steel and has a 0.381 inch diameter, 1.6880 inch long shank. It is designed for use with all materials, and meets the standards for USCTI 302. This SPGP series tap has a bright finish, and has fractional inch measurements. It has right hand direction with a 2-15/16 inch length. Plus it has three flutes and a straight shank.
This tap is made of cobalt and has a 0.255 inch diameter, 1.8900 inch long shank. It is designed for use with cast iron, stainless steel, steel, and meets the standards for DIN/ASME. This PER-960SP series tap has a hard lube finish, and has fractional inch measurements. It has right hand direction with a 3.1496 inch length. Plus it has three flutes and a straight shank.
This tap is made of cobalt and has a 0.255 inch diameter, 1.8900 inch long shank. It is designed for use with cast iron, stainless steel, steel, and meets the standards for DIN/ASME. This PER-960SP series tap has a hard lube finish, and has fractional inch measurements. It has right hand direction with a 3.1496 inch length. Plus it has three flutes and a straight shank.
This spiral point hand tap is 4 1/4 inches long, with a 3/4"-10 UNC thread and a 0.59-inch shank diameter. This bright, right hand tap is made from high speed steel.
This spiral point hand tap is 4 1/4 inches long, with a 3/4"-10 UNC thread and a 0.59-inch shank diameter. This bright, right hand tap is made from high speed steel.
This hand tap is made of high speed steel and has a 0.255 inch diameter, 1½ inch long shank. It is designed for use with all materials, and meets the standards for USCTI. This 1011 series hand tap has a bright finish, and has fractional inch measurements. It has right hand direction with a 2½ inch length. Plus it has two flutes and a straight shank.
This hand tap is made of high speed steel and has a 0.255 inch diameter, 1½ inch long shank. It is designed for use with all materials, and meets the standards for USCTI. This 1011 series hand tap has a bright finish, and has fractional inch measurements. It has right hand direction with a 2½ inch length. Plus it has two flutes and a straight shank.
This spiral point hand tap is 2 1/2 inches long, with a 1/4"-28 UNF thread and a 0.255-inch shank diameter. This bright, right hand tap is made from high speed steel.
This spiral point hand tap is 2 1/2 inches long, with a 1/4"-28 UNF thread and a 0.255-inch shank diameter. This bright, right hand tap is made from high speed steel.
This spiral point hand tap is 2 23/32 inches long, with a 5/16"-18 UNC thread and a 0.318-inch shank diameter. This bright, right hand tap has an H3 thread limit and is made from high speed steel.
This spiral point hand tap is 2 23/32 inches long, with a 5/16"-18 UNC thread and a 0.318-inch shank diameter. This bright, right hand tap has an H3 thread limit and is made from high speed steel.
This spiral point hand tap is 2 23/32 inches long, with a 5/16"-18 UNC thread and a 0.318-inch shank diameter. This bright, right hand tap has three flutes, an H5 thread limit, and is made from high speed steel.
This spiral point hand tap is 2 23/32 inches long, with a 5/16"-18 UNC thread and a 0.318-inch shank diameter. This bright, right hand tap has three flutes, an H5 thread limit, and is made from high speed steel.
This spiral point hand tap is 69.06 millimetres long, with a M8.0 x 1.00 thread and an 8.08-millimetre shank diameter. This bright, right hand tap is made from high speed steel.
This spiral point hand tap is 69.06 millimetres long, with a M8.0 x 1.00 thread and an 8.08-millimetre shank diameter. This bright, right hand tap is made from high speed steel.
This spiral point hand tap is two inches long, with a #6-32 UNC thread and a 0.141-inch shank diameter. This bright, right hand tap has an H1 thread limit and is made from high speed steel.
This spiral point hand tap is two inches long, with a #6-32 UNC thread and a 0.141-inch shank diameter. This bright, right hand tap has an H1 thread limit and is made from high speed steel.
This hand tap is made of high speed steel and has a 0.318 inch diameter, 1.6880 inch long shank. It is designed for use with all materials, and meets the standards for USCTI. This 1011 series hand tap has a bright finish, and has fractional inch measurements. It has right hand direction with a 2-15/16 inch length. Plus it has three flutes and a straight shank.
This hand tap is made of high speed steel and has a 0.318 inch diameter, 1.6880 inch long shank. It is designed for use with all materials, and meets the standards for USCTI. This 1011 series hand tap has a bright finish, and has fractional inch measurements. It has right hand direction with a 2-15/16 inch length. Plus it has three flutes and a straight shank.
This hand tap is made of high speed steel and has a 0.367 inch diameter, 1.7190 inch long shank. It is designed for use with all materials, and meets the standards for USCTI. This 1011 series hand tap has a bright finish, and has fractional inch measurements. It has right hand direction with a 3⅜ inch length. Plus it has three flutes and a straight shank.
This hand tap is made of high speed steel and has a 0.367 inch diameter, 1.7190 inch long shank. It is designed for use with all materials, and meets the standards for USCTI. This 1011 series hand tap has a bright finish, and has fractional inch measurements. It has right hand direction with a 3⅜ inch length. Plus it has three flutes and a straight shank.
This spiral point hand tap is 3 3/8 inches long, with a 1/2"-20 UNF thread and a 0.367-inch shank diameter. This bright, right hand tap is made from high speed steel.
This spiral point hand tap is 3 3/8 inches long, with a 1/2"-20 UNF thread and a 0.367-inch shank diameter. This bright, right hand tap is made from high speed steel.
This spiral point hand tap is 91.28 millimetres long, with a M14 x 1.50 thread and a 0.429-inch shank diameter. This bright, right hand tap is made from high speed steel.
This spiral point hand tap is 91.28 millimetres long, with a M14 x 1.50 thread and a 0.429-inch shank diameter. This bright, right hand tap is made from high speed steel.
This hand tap is made of high speed steel and has a 0.48 inch diameter, 50.80mm long shank. It is designed for use with all materials, and meets the standards for USCTI. This 1011 series hand tap has a bright finish, and has metric measurements. It has right hand direction with a 96.84mm length. Plus it has three flutes and a straight shank.
This hand tap is made of high speed steel and has a 0.48 inch diameter, 50.80mm long shank. It is designed for use with all materials, and meets the standards for USCTI. This 1011 series hand tap has a bright finish, and has metric measurements. It has right hand direction with a 96.84mm length. Plus it has three flutes and a straight shank.
This spiral point hand tap is 2 15/16 inches long, with a 3/8"-24 UNF thread and a 0.318-inch shank diameter. This bright, right hand tap has an H1 thread limit and is made from high speed steel.
This spiral point hand tap is 2 15/16 inches long, with a 3/8"-24 UNF thread and a 0.318-inch shank diameter. This bright, right hand tap has an H1 thread limit and is made from high speed steel.
This spiral point hand tap is 1 11/16 inches long, with a #1-72 UNF thread and a 0.141-inch shank diameter. This bright, right hand is made from high speed steel.
This spiral point hand tap is 1 11/16 inches long, with a #1-72 UNF thread and a 0.141-inch shank diameter. This bright, right hand is made from high speed steel.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
