Flap disc type describes the shape of disc, which affects how the disc contacts the workpiece.
Suggested results for "SUGGEST-ITEM"
Product ITEM is unavailable. See products from the same category below.
Flap Discs
Flap discs attach to angle grinders to smooth welds, clean surfaces, deburr, blend, and finish metal. Overlapping abrasive flaps are attached to a backing plate to provide a stable base. As the abrasive and backing material wear away, new abrasive is exposed to prolong the usable lifespan. Flap discs are more flexible than grinding discs, so they're less aggressive and produce a smoother finish.
Quick-step flap disc is for removing and blending in light welds, deburring, breaking edges, rounding corners in steel, stainless steel, aluminium and other non-ferrous metals.
Quick-step flap disc is for removing and blending in light welds, deburring, breaking edges, rounding corners in steel, stainless steel, aluminium and other non-ferrous metals.
Enduro-Flex for stainless steel with 5/8 inch-11 threaded hub has a superior performance on all heat sensitive metals. Consistent finish without any discoloration and may also be used on carbon steel and non-ferrous metals.
Enduro-Flex for stainless steel with 5/8 inch-11 threaded hub has a superior performance on all heat sensitive metals. Consistent finish without any discoloration and may also be used on carbon steel and non-ferrous metals.
Enduro-Flex for stainless steel with 5/8 inch.-11 threaded hub has a superior performance on all heat sensitive metals. Consistent finish without any discoloration and may also be used on carbon steel and non-ferrous metals.
Enduro-Flex for stainless steel with 5/8 inch.-11 threaded hub has a superior performance on all heat sensitive metals. Consistent finish without any discoloration and may also be used on carbon steel and non-ferrous metals.
Endur-Flex for steel with 5/8 inch-11 threaded hub has an ultra-resistant built-in threaded arbour for quick and easy disc changes. Removes welds and finishes surfaces in just one step, cutting your grinding/ finishing cost and reducing downtime.
Endur-Flex for steel with 5/8 inch-11 threaded hub has an ultra-resistant built-in threaded arbour for quick and easy disc changes. Removes welds and finishes surfaces in just one step, cutting your grinding/ finishing cost and reducing downtime.
Endur-Flex for steel with 5/8 inch-11 threaded hub has an ultra-resistant built-in threaded arbour for quick and easy disc changes. Removes welds and finishes surfaces in just one step, cutting your grinding/ finishing cost and reducing downtime.
Endur-Flex for steel with 5/8 inch-11 threaded hub has an ultra-resistant built-in threaded arbour for quick and easy disc changes. Removes welds and finishes surfaces in just one step, cutting your grinding/ finishing cost and reducing downtime.
Endur-Flex for steel with 5/8 inch-11 threaded hub has an ultra-resistant built-in threaded arbour for quick and easy disc changes. Removes welds and finishes surfaces in just one step, cutting your grinding/ finishing cost and reducing downtime.
Endur-Flex for steel with 5/8 inch-11 threaded hub has an ultra-resistant built-in threaded arbour for quick and easy disc changes. Removes welds and finishes surfaces in just one step, cutting your grinding/ finishing cost and reducing downtime.
Enduro-Flex stainless flap disc. Remove welds and finish surfaces in one step. For use on steel and stainless steel. 4-1/2in diameter, 7/8 arbor, 40 grit, 13,300 RPM.
Enduro-Flex stainless flap disc. Remove welds and finish surfaces in one step. For use on steel and stainless steel. 4-1/2in diameter, 7/8 arbor, 40 grit, 13,300 RPM.
Enduro-Flex stainless flap disc. Remove welds and finish surfaces in one step. For use on steel and stainless steel. 5in diameter, 7/8 arbor, 80 grit, 12,200 RPM.
Enduro-Flex stainless flap disc. Remove welds and finish surfaces in one step. For use on steel and stainless steel. 5in diameter, 7/8 arbor, 80 grit, 12,200 RPM.
This Type 27 flap disc provides a high removal rate on steel. This 40-grit disc is five inches in diameter, with a 5/8"-11 arbor size and a maximum 12200 RPM. Made with zirconia alumina, this disc is suitable for blending sharp corners, heavy deburring, or blending in fillet welds. Available in a pack of 10.
This Type 27 flap disc provides a high removal rate on steel. This 40-grit disc is five inches in diameter, with a 5/8"-11 arbor size and a maximum 12200 RPM. Made with zirconia alumina, this disc is suitable for blending sharp corners, heavy deburring, or blending in fillet welds. Available in a pack of 10.
This Type 27 flap disc provides a high removal rate on steel. This 60-grit disc is five inches in diameter, with a 5/8"-11 arbor size and a maximum 12200 RPM. Made with zirconia alumina, this disc is suitable for blending sharp corners, heavy deburring, or blending in fillet welds. Available in a pack of 10.
This Type 27 flap disc provides a high removal rate on steel. This 60-grit disc is five inches in diameter, with a 5/8"-11 arbor size and a maximum 12200 RPM. Made with zirconia alumina, this disc is suitable for blending sharp corners, heavy deburring, or blending in fillet welds. Available in a pack of 10.
This Enduro-Flex Turbo flap disc is for use on steel and stainless steel. This Type 27S disc is 4 1/2 inches in diameter with a 5/8"-11 arbor size. This 80-grit ceramic disc has a maximum 13300 RPM. Available in a pack of 10.
This Enduro-Flex Turbo flap disc is for use on steel and stainless steel. This Type 27S disc is 4 1/2 inches in diameter with a 5/8"-11 arbor size. This 80-grit ceramic disc has a maximum 13300 RPM. Available in a pack of 10.
Enduro-Flex stainless flap disc with the eco-trim backing. Iron, sulphur and chlorine free. Remove welds and finish surfaces in one step. Eco-trim backing is made from natural plant fibers and can be trimmed as necessary. 7in diameter, 7/8 arbor, 60 grit, 8,600 RPM.
Enduro-Flex stainless flap disc with the eco-trim backing. Iron, sulphur and chlorine free. Remove welds and finish surfaces in one step. Eco-trim backing is made from natural plant fibers and can be trimmed as necessary. 7in diameter, 7/8 arbor, 60 grit, 8,600 RPM.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
