Product ITEM is unavailable. See products from the same category below.
Fibre Discs
Fibre discs attach to a backup pad or faceplate on an angle grinder to remove stock and rust, blend welds, debur, and prepare surfaces for finishing. The fibre backing is stronger and more tear resistant than paper and cloth. The backup pad and faceplate provide stiffness to allow even pressure to be applied to the work surface for a smoother finish.
This series 982C quick-change abrasive-coated fibre sanding disc is brown and measures seven inches x TN mount hole. With 3M Precision Cubitron ceramic grain and a maximum RPM of 8,600, this fibre disc has a non-vacuum design. It is a complete carbon steel solution.
This series 982C quick-change abrasive-coated fibre sanding disc is brown and measures seven inches x TN mount hole. With 3M Precision Cubitron ceramic grain and a maximum RPM of 8,600, this fibre disc has a non-vacuum design. It is a complete carbon steel solution.
This series 982C extra-coarse abrasive-coated fibre sanding disc is brown and measures 5 x 7/8 inches. With 3M Precision Cubitron ceramic grain and a maximum RPM of 12,000, this fibre disc has a non-vacuum design and is a complete carbon steel solution.
This series 982C extra-coarse abrasive-coated fibre sanding disc is brown and measures 5 x 7/8 inches. With 3M Precision Cubitron ceramic grain and a maximum RPM of 12,000, this fibre disc has a non-vacuum design and is a complete carbon steel solution.
This quick-change fibre disc is five inches in diameter and 7/8-inch thick. It has 36 grit abrasive and is ideal to use with heat-sensitive materials, including stainless steel.
This quick-change fibre disc is five inches in diameter and 7/8-inch thick. It has 36 grit abrasive and is ideal to use with heat-sensitive materials, including stainless steel.
Engineered to wear evenly and maximize disc life, this quick-change fibre disc can withstand grinding speeds up to 12,000 RPM. It has 80 grit ceramic grain abrasive and was designed to optimize mineral breakdown. This sanding disc is ideal for most metalworking applications including work with carbon steel. It runs cool and has ultra-sharp, fast cutting points.
Engineered to wear evenly and maximize disc life, this quick-change fibre disc can withstand grinding speeds up to 12,000 RPM. It has 80 grit ceramic grain abrasive and was designed to optimize mineral breakdown. This sanding disc is ideal for most metalworking applications including work with carbon steel. It runs cool and has ultra-sharp, fast cutting points.
This seven-inch diameter, quick-change fibre disc is designed for use with heat-sensitive materials such as stainless steel. It has a 60 grit ceramic grain abrasive. This orange-coloured disc is 7/8-inch thick and can withstand a maximum rotation speed of 8,600 RPM.
This seven-inch diameter, quick-change fibre disc is designed for use with heat-sensitive materials such as stainless steel. It has a 60 grit ceramic grain abrasive. This orange-coloured disc is 7/8-inch thick and can withstand a maximum rotation speed of 8,600 RPM.
This series 982C quick-change abrasive-coated fibre sanding disc is brown and measures 4 1/2 inches x TN mount hole. With 3M Precision Cubitron ceramic grain and a maximum RPM of 12,000, this fibre disc has a non-vacuum design. It is a complete carbon steel solution.
This series 982C quick-change abrasive-coated fibre sanding disc is brown and measures 4 1/2 inches x TN mount hole. With 3M Precision Cubitron ceramic grain and a maximum RPM of 12,000, this fibre disc has a non-vacuum design. It is a complete carbon steel solution.
This series 982C extra-coarse abrasive-coated fibre sanding disc is brown and measures 9 x 7/8 inches. With 3M Precision Cubitron ceramic grain and a maximum RPM of 8,600, this fibre disc has a non-vacuum design and is a complete carbon steel solution.
This series 982C extra-coarse abrasive-coated fibre sanding disc is brown and measures 9 x 7/8 inches. With 3M Precision Cubitron ceramic grain and a maximum RPM of 8,600, this fibre disc has a non-vacuum design and is a complete carbon steel solution.
This series 982C quick-change abrasive-coated fibre sanding disc is brown and measures five inches x TN mount hole. With 3M Precision Cubitron ceramic grain and a maximum RPM of 12,000, this fibre disc has a non-vacuum design. It is a complete carbon steel solution.
This series 982C quick-change abrasive-coated fibre sanding disc is brown and measures five inches x TN mount hole. With 3M Precision Cubitron ceramic grain and a maximum RPM of 12,000, this fibre disc has a non-vacuum design. It is a complete carbon steel solution.
This quick-change fibre disc has 36 grit ceramic grain abrasive and is perfect for use with heat-sensitive materials like stainless steel. It is seven inches in diameter and 7/8-inch thick and is able to withstand grinding speeds of up to 8,600 RPM.
This quick-change fibre disc has 36 grit ceramic grain abrasive and is perfect for use with heat-sensitive materials like stainless steel. It is seven inches in diameter and 7/8-inch thick and is able to withstand grinding speeds of up to 8,600 RPM.
This 9 1/8-inch diameter, quick-change fibre disc has 36 grit ceramic grain abrasive and is perfect for use with heat-sensitive materials like stainless steel. It is 7/8-inch thick.
This 9 1/8-inch diameter, quick-change fibre disc has 36 grit ceramic grain abrasive and is perfect for use with heat-sensitive materials like stainless steel. It is 7/8-inch thick.
This quick-change fibre disc is engineered to wear evenly and maximize disc life. It has 60 grit ceramic grain abrasive designed to optimize mineral breakdown and can withstand grinding speeds up to 12,000 RPM. This sanding disc runs cool and has ultra-sharp, fast cutting points. It is ideal for most metalworking applications including work with carbon steel.
This quick-change fibre disc is engineered to wear evenly and maximize disc life. It has 60 grit ceramic grain abrasive designed to optimize mineral breakdown and can withstand grinding speeds up to 12,000 RPM. This sanding disc runs cool and has ultra-sharp, fast cutting points. It is ideal for most metalworking applications including work with carbon steel.
Designed for use with heat-sensitive materials such as stainless steel, this seven-inch diameter, quick-change fibre disc can withstand a maximum rotation speed of 8,600 RPM. This orange-coloured disc is 7/8-inch thick and has 80 grit ceramic grain abrasive.
Designed for use with heat-sensitive materials such as stainless steel, this seven-inch diameter, quick-change fibre disc can withstand a maximum rotation speed of 8,600 RPM. This orange-coloured disc is 7/8-inch thick and has 80 grit ceramic grain abrasive.
This brown-coloured, quick-change fibre disc has 60 grit ceramic grain abrasive designed to optimize mineral breakdown and can withstand grinding speeds up to 8,600 RPM. It is engineered to wear evenly and maximize disc life. This sanding disc runs cool and has ultra-sharp, fast cutting points. It is ideal for most metalworking applications including work with carbon steel.
This brown-coloured, quick-change fibre disc has 60 grit ceramic grain abrasive designed to optimize mineral breakdown and can withstand grinding speeds up to 8,600 RPM. It is engineered to wear evenly and maximize disc life. This sanding disc runs cool and has ultra-sharp, fast cutting points. It is ideal for most metalworking applications including work with carbon steel.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
