Product ITEM is unavailable. See products from the same category below.
Drill & Die Grinder Radial Bristle Discs
Drill and die grinder bristle discs are made of grain-embedded flexible nylon and conform to contoured and irregular worksurfaces. They are used on metal and plastic to remove surface contaminants without excessive abrasion, clean around tight corners, and brush narrow passages. Bristle discs don't have sharp wires that break off and penetrate skin.
An ATB end brush with bridle, 3/4 inch in diameter with a 1/4-inch shank. Filaments are made of tungsten carbide, and are 0.04 inches. The maximum operating speed is 9000 RPM, and has a grit of 120.
An ATB end brush with bridle, 3/4 inch in diameter with a 1/4-inch shank. Filaments are made of tungsten carbide, and are 0.04 inches. The maximum operating speed is 9000 RPM, and has a grit of 120.
Brush tools have a wide-face construction which is highly effective on both metallic and non-metallic materials. The brush may be used singly or mounted in multiple for a wider face. Applications: deburring, edge breaking, finishing.
Brush tools have a wide-face construction which is highly effective on both metallic and non-metallic materials. The brush may be used singly or mounted in multiple for a wider face. Applications: deburring, edge breaking, finishing.
This ATB Monarch crimped wire wheel brush features a narrow face and is made for use with bench and pedestal grinders. It can be arbor mounted and measures eight inches in diameter. This nylon brush has a maximum RPM of 5,500, a face width of 1/2 inches, and a wire diameter of 0.035 inches.
This ATB Monarch crimped wire wheel brush features a narrow face and is made for use with bench and pedestal grinders. It can be arbor mounted and measures eight inches in diameter. This nylon brush has a maximum RPM of 5,500, a face width of 1/2 inches, and a wire diameter of 0.035 inches.
This 80-grit, ATB Monarch, crimped wire wheel brush features a narrow face and is made for use with bench and pedestal grinders. It can be arbor mounted and measures six inches in diameter. It has a maximum RPM of 5,500, a face width of 1/2 inches, and a wire diameter of 0.04 inches.
This 80-grit, ATB Monarch, crimped wire wheel brush features a narrow face and is made for use with bench and pedestal grinders. It can be arbor mounted and measures six inches in diameter. It has a maximum RPM of 5,500, a face width of 1/2 inches, and a wire diameter of 0.04 inches.
Keep the finishing fresh on your surfaces with this nylon round trim cup brush that has a threaded arbor and has a maximum RPM of 6,000. Each brush head measures four inches while the wire measures 0.022 inches in diameter.
Keep the finishing fresh on your surfaces with this nylon round trim cup brush that has a threaded arbor and has a maximum RPM of 6,000. Each brush head measures four inches while the wire measures 0.022 inches in diameter.
ATB end brush with high-performance abrasive nylon filament Novofil NN-S, at 0.024 inches diameter. Small, ideal for cleaning and finishing inside diameter, spot facing, and recessed areas with a 1/4 inch stem and a one-inch trim length. Ideally operated at 9,000 RPM, has a 120 grit size, and measures at 2 3/4 x 1/2 inches.
ATB end brush with high-performance abrasive nylon filament Novofil NN-S, at 0.024 inches diameter. Small, ideal for cleaning and finishing inside diameter, spot facing, and recessed areas with a 1/4 inch stem and a one-inch trim length. Ideally operated at 9,000 RPM, has a 120 grit size, and measures at 2 3/4 x 1/2 inches.
This ATB Monarch crimped wire wheel brush features a narrow face and is made for use with bench and pedestal grinders. It can be arbor mounted and measures six inches in diameter. It has a maximum RPM of 5,500, a face width of 1/2 inches, and a wire diameter of 0.035 inches.
This ATB Monarch crimped wire wheel brush features a narrow face and is made for use with bench and pedestal grinders. It can be arbor mounted and measures six inches in diameter. It has a maximum RPM of 5,500, a face width of 1/2 inches, and a wire diameter of 0.035 inches.
An ATB end brush with bridle, one inch in diameter with a 1/4-inch shank. Filaments are made of tungsten carbide, and are 0.04 inches. The maximum operating speed is 9000 RPM, and has a grit of 80.
An ATB end brush with bridle, one inch in diameter with a 1/4-inch shank. Filaments are made of tungsten carbide, and are 0.04 inches. The maximum operating speed is 9000 RPM, and has a grit of 80.
Brush tools have a wide-face construction which is highly effective on both metallic and non-metallic materials. The brush may be used singly or mounted in multiple for a wider face. Applications: deburring, edge breaking, finishing.
Brush tools have a wide-face construction which is highly effective on both metallic and non-metallic materials. The brush may be used singly or mounted in multiple for a wider face. Applications: deburring, edge breaking, finishing.
Brush tools have a wide-face construction which is highly effective on both metallic and non-metallic materials. The brush may be used singly or mounted in multiple for a wider face. Applications: deburring, edge breaking, finishing.
Brush tools have a wide-face construction which is highly effective on both metallic and non-metallic materials. The brush may be used singly or mounted in multiple for a wider face. Applications: deburring, edge breaking, finishing.
An ATB end brush with bridle, 1/2 inch in diameter with a 1/4-inch shank. Filaments are made of tungsten carbide, and are 0.04 inches. The maximum operating speed is 9000 RPM, and has a grit of 120.
An ATB end brush with bridle, 1/2 inch in diameter with a 1/4-inch shank. Filaments are made of tungsten carbide, and are 0.04 inches. The maximum operating speed is 9000 RPM, and has a grit of 120.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
