Product ITEM is unavailable. See products from the same category below.
Contact Tips for Bernard, Miller & Hobart MIG Guns
These contact tips each transfer current to the electrode wire as the wire passes through a compatible Bernard, Miller, and Hobart MIG (metal inert gas) gun. Each tip installs into a MIG gun's nozzle and establishes a point of contact between the gun and the electrode wire. Contact tips must be replaced when they become worn. A complete MIG gun setup includes a nozzle, contact tip, gas diffuser, conductor tube, and gun liner.
T Series contact tip. Use with large or small nozzles and diffusers. Size: 0.045 inch. CENTERFIRE consumables bring superior performance and reduced down time to all Q-Guns. Have them attached to your MIG gun.
T Series contact tip. Use with large or small nozzles and diffusers. Size: 0.045 inch. CENTERFIRE consumables bring superior performance and reduced down time to all Q-Guns. Have them attached to your MIG gun.
Tapered TT series contact tip. Use with large or small tapered nozzles, large or small diffusers. Size: 0.035 inch. CENTERFIRE consumables bring superior performance and reduced down time to all Q-Guns. Have them attached to your MIG gun.
Tapered TT series contact tip. Use with large or small tapered nozzles, large or small diffusers. Size: 0.035 inch. CENTERFIRE consumables bring superior performance and reduced down time to all Q-Guns. Have them attached to your MIG gun.
T Series contact tip. Use with large or small nozzles and diffusers. Size: 0.062 inch. CENTERFIRE consumables bring superior performance and reduced down time to all Q-Guns. Have them attached to your MIG gun.
T Series contact tip. Use with large or small nozzles and diffusers. Size: 0.062 inch. CENTERFIRE consumables bring superior performance and reduced down time to all Q-Guns. Have them attached to your MIG gun.
T Series contact tip. Use with large or small nozzles and diffusers. Size: 0.035 inch. CENTERFIRE consumables bring superior performance and reduced down time to all Q-Guns. Have them attached to your MIG gun.
T Series contact tip. Use with large or small nozzles and diffusers. Size: 0.035 inch. CENTERFIRE consumables bring superior performance and reduced down time to all Q-Guns. Have them attached to your MIG gun.
Contact tip, screw type. Key: 2. Miller Electric M-Gun model: M100/15/25/40. Size: 0.035 inch. Wire size: 0.045 inch. Perfect fit, function and durability every time. Miller Genuine parts are the same parts and consumables and used in the original product.
Contact tip, screw type. Key: 2. Miller Electric M-Gun model: M100/15/25/40. Size: 0.035 inch. Wire size: 0.045 inch. Perfect fit, function and durability every time. Miller Genuine parts are the same parts and consumables and used in the original product.
This Tough Lock contact tip is made of copper. Plus, it is compatible with BTB, Clean Air, TGX, Tough Gun, G1, G2, TA3, ThruArm G2, Tregaskiss robotic CA3, and Tregaskiss brand. It can be used for MIG welding.
This Tough Lock contact tip is made of copper. Plus, it is compatible with BTB, Clean Air, TGX, Tough Gun, G1, G2, TA3, ThruArm G2, Tregaskiss robotic CA3, and Tregaskiss brand. It can be used for MIG welding.
This 7400 Series, copper contact tip is made for Bernard-style MIG guns and for use with 4335 and 4435 gas diffusers. It is size 1/16 inch with a slip-on connection, and a wire size of 1/16 inch, and has a tip inside diameter of 0.076 inch.
This 7400 Series, copper contact tip is made for Bernard-style MIG guns and for use with 4335 and 4435 gas diffusers. It is size 1/16 inch with a slip-on connection, and a wire size of 1/16 inch, and has a tip inside diameter of 0.076 inch.
Direct hook-up to Millermatic(R) 250X, 251, 252, 350 and 350P power sources. Use WC-24 Weld Control with Miller power sources supplying 24 VAC and 14 pin receptacles. Use WC-115A with other Miller and competitive CC and CV power sources.
Direct hook-up to Millermatic(R) 250X, 251, 252, 350 and 350P power sources. Use WC-24 Weld Control with Miller power sources supplying 24 VAC and 14 pin receptacles. Use WC-115A with other Miller and competitive CC and CV power sources.
This 7400 Series, copper contact tip is made for Bernard-style MIG guns and for use with 4335 and 4435 gas diffusers. It is size 0.045 inch with a wire size of 0.045 inch, and has a tip inside diameter of 0.056 inch.
This 7400 Series, copper contact tip is made for Bernard-style MIG guns and for use with 4335 and 4435 gas diffusers. It is size 0.045 inch with a wire size of 0.045 inch, and has a tip inside diameter of 0.056 inch.
This Tough Lock contact tip is made of copper. Plus, it is compatible with BTB, Clean Air, Tough Gun, CA3, MA1, MW1, TA3, TT4A, TT4E, and Tregaskiss brand. It can be used for MIG welding.
This Tough Lock contact tip is made of copper. Plus, it is compatible with BTB, Clean Air, Tough Gun, CA3, MA1, MW1, TA3, TT4A, TT4E, and Tregaskiss brand. It can be used for MIG welding.
This Tough Lock contact tip is made of copper. Plus, it is compatible with BTB, Clean Air, TGX, Tough Gun, G1, G2, TA3, ThruArm G2, Tregaskiss robotic CA3, and Tregaskiss brand. It can be used for MIG welding.
This Tough Lock contact tip is made of copper. Plus, it is compatible with BTB, Clean Air, TGX, Tough Gun, G1, G2, TA3, ThruArm G2, Tregaskiss robotic CA3, and Tregaskiss brand. It can be used for MIG welding.
Direct hook-up to Millermatic(R) 250X, 251, 252, 350 and 350P power sources. Use WC-24 Weld Control with Miller power sources supplying 24 VAC and 14 pin receptacles. Use WC-115A with other Miller and competitive CC and CV power sources.
Direct hook-up to Millermatic(R) 250X, 251, 252, 350 and 350P power sources. Use WC-24 Weld Control with Miller power sources supplying 24 VAC and 14 pin receptacles. Use WC-115A with other Miller and competitive CC and CV power sources.
Direct hook up to Millermatic(R) 210. SGA100 control required for connection to other Miller and competitive power sources. Typical light industrial applications include auto and marine repair, aluminum fabrication.
Direct hook up to Millermatic(R) 210. SGA100 control required for connection to other Miller and competitive power sources. Typical light industrial applications include auto and marine repair, aluminum fabrication.
Contact tip, screw type. Key: 2. Miller Electric M-Gun model: M100/15/25/40. Size: 0.045 inch. Wire size: 0.045 inch. Perfect fit, function and durability every time. Miller Genuine parts are the same parts and consumables and used in the original product.
Contact tip, screw type. Key: 2. Miller Electric M-Gun model: M100/15/25/40. Size: 0.045 inch. Wire size: 0.045 inch. Perfect fit, function and durability every time. Miller Genuine parts are the same parts and consumables and used in the original product.
T Series contact tip. Use with large or small nozzles and diffusers. Size: 0.052 inch. CENTERFIRE consumables bring superior performance and reduced down time to all Q-Guns. Have them attached to your MIG gun.
T Series contact tip. Use with large or small nozzles and diffusers. Size: 0.052 inch. CENTERFIRE consumables bring superior performance and reduced down time to all Q-Guns. Have them attached to your MIG gun.
T Series contact tip. Use with large or small nozzles and diffusers. Size: 0.045 inch. CENTERFIRE consumables bring superior performance and reduced down time to all Q-Guns. Have them attached to your MIG gun.
T Series contact tip. Use with large or small nozzles and diffusers. Size: 0.045 inch. CENTERFIRE consumables bring superior performance and reduced down time to all Q-Guns. Have them attached to your MIG gun.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
