Cobalt Jobber-Length Drill Bits

This high-performance jobber length drill bit is made of cobalt and has a ⅛ inch diameter shank. It is not rated for any standards. This jobber length drill bit has a straw/bronze finish, and has wire measurements. It is non-coolant through with a 2⅞ inch length. Plus it has one 1¾ inch spiral flute, a straight shank, and a 135 Degrees split point drill point.

This high-performance jobber length drill bit is made of cobalt and has a ⅛ inch diameter shank. It is not rated for any standards. This jobber length drill bit has a straw/bronze finish, and has wire measurements. It is non-coolant through with a 2⅞ inch length. Plus it has one 1¾ inch spiral flute, a straight shank, and a 135 Degrees split point drill point.

This high-performance jobber length drill bit is made of cobalt and has a 9/64 inch diameter shank. It meets the standards for ASME. This jobber length drill bit has a straw/bronze finish, and has fractional inch measurements. It is non-coolant through with a 2⅞ inch length. Plus it has two 1¾ inch spiral flutes, a straight shank, and a 135 Degrees split point.

This high-performance jobber length drill bit is made of cobalt and has a 9/64 inch diameter shank. It meets the standards for ASME. This jobber length drill bit has a straw/bronze finish, and has fractional inch measurements. It is non-coolant through with a 2⅞ inch length. Plus it has two 1¾ inch spiral flutes, a straight shank, and a 135 Degrees split point.

This high-performance jobber length drill bit is made of cobalt and has a 13/32 inch diameter, 1⅜ inch long shank. It is for use with aluminum, cast iron, hardened steel, high-temperature alloy, non-ferrous material, steel, and meets ASME standards. This jobber length drill bit has a straw/bronze finish, and has metric measurements. It is non-coolant through with a 5¼ inch length. Plus it has two 3⅞ inch spiral flutes, a straight shank, and a 135 Degrees split point.

This high-performance jobber length drill bit is made of cobalt and has a 13/32 inch diameter, 1⅜ inch long shank. It is for use with aluminum, cast iron, hardened steel, high-temperature alloy, non-ferrous material, steel, and meets ASME standards. This jobber length drill bit has a straw/bronze finish, and has metric measurements. It is non-coolant through with a 5¼ inch length. Plus it has two 3⅞ inch spiral flutes, a straight shank, and a 135 Degrees split point.

This jobber length drill bit is made of cobalt and has a 7/64 inch diameter shank. It is not rated for any standards. This jobber length drill bit has a straw/bronze finish, and has metric measurements. It is non-coolant through with a 61mm length. Plus it has one 33mm spiral flutes, a straight shank, and a 135 Degrees split point drill point.

This jobber length drill bit is made of cobalt and has a 7/64 inch diameter shank. It is not rated for any standards. This jobber length drill bit has a straw/bronze finish, and has metric measurements. It is non-coolant through with a 61mm length. Plus it has one 33mm spiral flutes, a straight shank, and a 135 Degrees split point drill point.

This high-performance jobber length drill bit is made of cobalt and has a 3/16 inch diameter shank. It meets the standards for ASME. This jobber length drill bit has a straw/bronze finish, and has fractional inch measurements. It is non-coolant through with a 3½ inch length. Plus it has two 2 5/16 inch spiral flutes, a straight shank, and a 135 Degrees split point.

This high-performance jobber length drill bit is made of cobalt and has a 3/16 inch diameter shank. It meets the standards for ASME. This jobber length drill bit has a straw/bronze finish, and has fractional inch measurements. It is non-coolant through with a 3½ inch length. Plus it has two 2 5/16 inch spiral flutes, a straight shank, and a 135 Degrees split point.

This high-performance jobber length drill bit is made of cobalt and has a 17/64 inch diameter shank. It meets the standards for ASME. This jobber length drill bit has a straw/bronze finish, and has fractional inch measurements. It is non-coolant through with a 4⅛ inch length. Plus it has two 2⅞ inch spiral flutes, a straight shank, and a 135 Degrees split point.

This high-performance jobber length drill bit is made of cobalt and has a 17/64 inch diameter shank. It meets the standards for ASME. This jobber length drill bit has a straw/bronze finish, and has fractional inch measurements. It is non-coolant through with a 4⅛ inch length. Plus it has two 2⅞ inch spiral flutes, a straight shank, and a 135 Degrees split point.

This jobber length drill bit is made of cobalt and has a 19/64 inch diameter shank. It is not rated for any standards. This jobber length drill bit has a straw/bronze finish, and has metric measurements. It is non-coolant through with a 117mm length. Plus it has one 75mm spiral flutes, a straight shank, and a 135 Degrees split point drill point.

This jobber length drill bit is made of cobalt and has a 19/64 inch diameter shank. It is not rated for any standards. This jobber length drill bit has a straw/bronze finish, and has metric measurements. It is non-coolant through with a 117mm length. Plus it has one 75mm spiral flutes, a straight shank, and a 135 Degrees split point drill point.

This jobber length drill bit is made of cobalt and has a ⅜ inch diameter shank. It is not rated for any standards. This jobber length drill bit has a straw/bronze finish, and has fractional inch measurements. It is non-coolant through and has a 143 Degrees drill bit point, with a six-inch length. Plus it has 4½ inch spiral flutes, a straight shank, and 143 Degrees split point drill point.

This jobber length drill bit is made of cobalt and has a ⅜ inch diameter shank. It is not rated for any standards. This jobber length drill bit has a straw/bronze finish, and has fractional inch measurements. It is non-coolant through and has a 143 Degrees drill bit point, with a six-inch length. Plus it has 4½ inch spiral flutes, a straight shank, and 143 Degrees split point drill point.

This jobber length drill bit is made of cobalt and has a ⅜ inch diameter shank. It is not rated for any standards. This jobber length drill bit has a straw/bronze finish, and has fractional inch measurements. It is non-coolant through and has a 143 Degrees drill bit point, with a 5½ inch length. Plus it has 4 1/16 inch spiral flutes, a straight shank, and 143 Degrees split point drill point.

This jobber length drill bit is made of cobalt and has a ⅜ inch diameter shank. It is not rated for any standards. This jobber length drill bit has a straw/bronze finish, and has fractional inch measurements. It is non-coolant through and has a 143 Degrees drill bit point, with a 5½ inch length. Plus it has 4 1/16 inch spiral flutes, a straight shank, and 143 Degrees split point drill point.

This high-performance jobber length drill bit is made of cobalt and has a ½ inch diameter shank. It meets the standards for ASME. This jobber length drill bit has a straw/bronze finish, and has fractional inch measurements. It is non-coolant through and has a six-inch length. Plus it has two 4½ inch spiral flutes, a straight shank, right hand cutting direction, and a 135 Degrees split point drill point.

This high-performance jobber length drill bit is made of cobalt and has a ½ inch diameter shank. It meets the standards for ASME. This jobber length drill bit has a straw/bronze finish, and has fractional inch measurements. It is non-coolant through and has a six-inch length. Plus it has two 4½ inch spiral flutes, a straight shank, right hand cutting direction, and a 135 Degrees split point drill point.

This high-performance jobber length drill bit is made of cobalt and has a 1/16 inch diameter, one-inch long shank. It is for use with aluminum, cast iron, hardened steel, high-temperature alloy, non-ferrous material, steel, and meets ASME standards. This jobber length drill bit has a straw/bronze finish, and has fractional inch measurements. It is non-coolant through with a 1⅞ inch length. Plus it has two ⅞ inch spiral flutes, a straight shank, and a 135 Degrees split point.

This high-performance jobber length drill bit is made of cobalt and has a 1/16 inch diameter, one-inch long shank. It is for use with aluminum, cast iron, hardened steel, high-temperature alloy, non-ferrous material, steel, and meets ASME standards. This jobber length drill bit has a straw/bronze finish, and has fractional inch measurements. It is non-coolant through with a 1⅞ inch length. Plus it has two ⅞ inch spiral flutes, a straight shank, and a 135 Degrees split point.

This jobber length drill bit is made of cobalt and has a 3/16 inch diameter shank. It is not rated for any standards. This jobber length drill bit has a straw/bronze finish, and has metric measurements. It is non-coolant through with a 86mm length. Plus it has one 52mm spiral flutes, a straight shank, and a 135 Degrees split point drill point.

This jobber length drill bit is made of cobalt and has a 3/16 inch diameter shank. It is not rated for any standards. This jobber length drill bit has a straw/bronze finish, and has metric measurements. It is non-coolant through with a 86mm length. Plus it has one 52mm spiral flutes, a straight shank, and a 135 Degrees split point drill point.

This high-performance jobber length drill bit is made of cobalt and has a 11/64 inch diameter shank. It is not rated for any standards. This jobber length drill bit has a straw/bronze finish, and has wire measurements. It is non-coolant through with a 3⅜ inch length. Plus it has one 2 3/16-inch spiral flute, a straight shank, and a 135 Degrees split point drill point.

This high-performance jobber length drill bit is made of cobalt and has a 11/64 inch diameter shank. It is not rated for any standards. This jobber length drill bit has a straw/bronze finish, and has wire measurements. It is non-coolant through with a 3⅜ inch length. Plus it has one 2 3/16-inch spiral flute, a straight shank, and a 135 Degrees split point drill point.

Ce foret court est en cobalt et possède une tige de 1/16 po de diamètre. Il ne correspond à aucune norme. Ce foret a un fini paille/bronze et il est métrique. Il est sans canal de refroidissement et mesure 43 mm de long. De plus, il possède une cannelure hélicoïdale de 20 mm, une tige droite, une direction de coupe à main droite et un angle de pointe de 135°.

Ce foret court est en cobalt et possède une tige de 1/16 po de diamètre. Il ne correspond à aucune norme. Ce foret a un fini paille/bronze et il est métrique. Il est sans canal de refroidissement et mesure 43 mm de long. De plus, il possède une cannelure hélicoïdale de 20 mm, une tige droite, une direction de coupe à main droite et un angle de pointe de 135°.

Ce foret court à haut rendement est en cobalt et possède une tige de 5/64 po de diamètre. Il ne correspond à aucune norme. Ce foret a un fini paille/bronze et des mesures de fil. Il est sans canal de refroidissement et est 2 po de long. De plus, il possède une cannelure hélicoïdale de 1 1/8 po, une tige droite et un angle de pointe de 135°.

Ce foret court à haut rendement est en cobalt et possède une tige de 5/64 po de diamètre. Il ne correspond à aucune norme. Ce foret a un fini paille/bronze et des mesures de fil. Il est sans canal de refroidissement et est 2 po de long. De plus, il possède une cannelure hélicoïdale de 1 1/8 po, une tige droite et un angle de pointe de 135°.

Ce foret court à haut rendement est en cobalt et possède une tige de 1/16 po de diamètre. Il ne correspond à aucune norme. Ce foret a un fini paille/bronze et des mesures de fil. Il est sans canal de refroidissement et est 2 po de long. De plus, il possède une cannelure hélicoïdale de 1 po, une tige droite et un angle de pointe de 135°.

Ce foret court à haut rendement est en cobalt et possède une tige de 1/16 po de diamètre. Il ne correspond à aucune norme. Ce foret a un fini paille/bronze et des mesures de fil. Il est sans canal de refroidissement et est 2 po de long. De plus, il possède une cannelure hélicoïdale de 1 po, une tige droite et un angle de pointe de 135°.