Brass Compression Tube Fittings for Air, Liquids & Chemicals

This compression series male connector meets the standards for SAE J512, UL, has a length of 1 3/32 inch, a maximum operating pressure of 1,400 psi and is designed for the following applications: air, inert gases, non-combustible gases, potable water. It has an operating temperature of 65 Degrees F to 200 Degrees F, and is made of brass. In addition, it is a straight adapter, with an imperial system of measurement. Plus, it has a 7/16 inch hex size.

This compression series male connector meets the standards for SAE J512, UL, has a length of 1 3/32 inch, a maximum operating pressure of 1,400 psi and is designed for the following applications: air, inert gases, non-combustible gases, potable water. It has an operating temperature of 65 Degrees F to 200 Degrees F, and is made of brass. In addition, it is a straight adapter, with an imperial system of measurement. Plus, it has a 7/16 inch hex size.

This compression series brass sleeve meets the standards for SAE J512, has a length of 7/32 inch, a maximum operating pressure of 400 psi, has an operating temperature of 65 Degrees F to 250 Degrees F, and is made of brass. In addition, it is a sleeve, with an imperial system of measurement.

This compression series brass sleeve meets the standards for SAE J512, has a length of 7/32 inch, a maximum operating pressure of 400 psi, has an operating temperature of 65 Degrees F to 250 Degrees F, and is made of brass. In addition, it is a sleeve, with an imperial system of measurement.

This Poly-Tite series sleeve meets the standards for SAE J512, has a length of 3/16 inch, a maximum operating pressure of 200 psi, has an operating temperature of 65 Degrees F to 250 Degrees F, and is made of acetal. In addition, it is a sleeve, with an imperial system of measurement.

This Poly-Tite series sleeve meets the standards for SAE J512, has a length of 3/16 inch, a maximum operating pressure of 200 psi, has an operating temperature of 65 Degrees F to 250 Degrees F, and is made of acetal. In addition, it is a sleeve, with an imperial system of measurement.

This compression series male connector meets the standards for SAE J512, UL, has a length of 1 5/16 inch, a maximum operating pressure of 1,400 psi and is designed for the following applications: air, inert gases, non-combustible gases, non-potable water. It has an operating temperature of 65 Degrees F to 200 Degrees F, and is made of brass. In addition, it is a straight adapter, with an imperial system of measurement. Plus, it has a 9/16 inch hex size.

This compression series male connector meets the standards for SAE J512, UL, has a length of 1 5/16 inch, a maximum operating pressure of 1,400 psi and is designed for the following applications: air, inert gases, non-combustible gases, non-potable water. It has an operating temperature of 65 Degrees F to 200 Degrees F, and is made of brass. In addition, it is a straight adapter, with an imperial system of measurement. Plus, it has a 9/16 inch hex size.

This insert meets the standards for NSF 61 Annex G, has a length of 5/16 inch, a maximum operating pressure of 300 psi and is designed for the following applications: air and non-potable water. It has an operating temperature of 65 Degrees F to 250 Degrees F, and is made of brass. In addition, it is a tube insert, with an imperial system of measurement.

This insert meets the standards for NSF 61 Annex G, has a length of 5/16 inch, a maximum operating pressure of 300 psi and is designed for the following applications: air and non-potable water. It has an operating temperature of 65 Degrees F to 250 Degrees F, and is made of brass. In addition, it is a tube insert, with an imperial system of measurement.

This compression series nut meets the standards for SAE 060110, has a length of 7/16 inch, a maximum operating pressure of 300 psi and is designed for the following applications: air, inert gases, non-combustible gases. It has an operating temperature of 65 Degrees F to 250 Degrees F, and is made of brass. In addition, it is a nut, with an imperial system of measurement, and 7/16"-24 thread. Plus, it has a compression connection type and ½ inch hex size.

This compression series nut meets the standards for SAE 060110, has a length of 7/16 inch, a maximum operating pressure of 300 psi and is designed for the following applications: air, inert gases, non-combustible gases. It has an operating temperature of 65 Degrees F to 250 Degrees F, and is made of brass. In addition, it is a nut, with an imperial system of measurement, and 7/16"-24 thread. Plus, it has a compression connection type and ½ inch hex size.

This sleeve meets the standards for NSF 61 Annex G, has a length of ¼ inch, a maximum operating pressure of 300 psi, has an operating temperature of 40 Degrees F to 250 Degrees F, and is made of brass. In addition, it is a sleeve, with an imperial system of measurement.

This sleeve meets the standards for NSF 61 Annex G, has a length of ¼ inch, a maximum operating pressure of 300 psi, has an operating temperature of 40 Degrees F to 250 Degrees F, and is made of brass. In addition, it is a sleeve, with an imperial system of measurement.

This tube support meets the standards for NSF Lead Content Program, has a length of 15/32 inch, a maximum operating pressure of 400 psi and is designed for the following applications: air lines, chemical dispensing, compressors, cooling lines, fluid transfer, industry, lubrication lines, machinery. It has an operating temperature of 65 Degrees F to 200 Degrees F, and is made of brass. In addition, it is a tube insert, with an imperial system of measurement.

This tube support meets the standards for NSF Lead Content Program, has a length of 15/32 inch, a maximum operating pressure of 400 psi and is designed for the following applications: air lines, chemical dispensing, compressors, cooling lines, fluid transfer, industry, lubrication lines, machinery. It has an operating temperature of 65 Degrees F to 200 Degrees F, and is made of brass. In addition, it is a tube insert, with an imperial system of measurement.

This compression series male elbow meets the standards for SAE J512, UL, has a length of ⅞ inch, a maximum operating pressure of 1,400 psi and is designed for the following applications: air, inert gases, non-combustible gases, potable water. It has an operating temperature of 65 Degrees F to 200 Degrees F, and is made of brass. In addition, it is a 90 Degrees elbow adapter, with an imperial system of measurement.

This compression series male elbow meets the standards for SAE J512, UL, has a length of ⅞ inch, a maximum operating pressure of 1,400 psi and is designed for the following applications: air, inert gases, non-combustible gases, potable water. It has an operating temperature of 65 Degrees F to 200 Degrees F, and is made of brass. In addition, it is a 90 Degrees elbow adapter, with an imperial system of measurement.

This compression series sleeve meets the standards for SAE J512, has a length of ¼ inch, a maximum operating pressure of 200 psi, has an operating temperature of 65 Degrees F to 250 Degrees F, and is made of brass. In addition, it is a sleeve, with an imperial system of measurement.

This compression series sleeve meets the standards for SAE J512, has a length of ¼ inch, a maximum operating pressure of 200 psi, has an operating temperature of 65 Degrees F to 250 Degrees F, and is made of brass. In addition, it is a sleeve, with an imperial system of measurement.

This male connector meets the standards for NSF/ANSI 61 Annex G, has a maximum operating pressure of 200 psi and is designed for the following applications: gasoline, oils, potable water. It has an operating temperature of 40 Degrees F to 250 Degrees F, and is made of brass. In addition, it is a straight adapter, with an imperial system of measurement. Plus, it has a 11/16 inch hex size.

This male connector meets the standards for NSF/ANSI 61 Annex G, has a maximum operating pressure of 200 psi and is designed for the following applications: gasoline, oils, potable water. It has an operating temperature of 40 Degrees F to 250 Degrees F, and is made of brass. In addition, it is a straight adapter, with an imperial system of measurement. Plus, it has a 11/16 inch hex size.

This compression series union meets the standards for SAE J512, UL, has a length of 1 17/32 inch, a maximum operating pressure of 1,000 psi and is designed for the following applications: air, inert gases, non-combustible gases, non-potable water. It has an operating temperature of 65 Degrees F to 200 Degrees F, and is made of brass. In addition, it is a straight connector, with an imperial system of measurement. Plus, it has a 9/16 inch hex size.

This compression series union meets the standards for SAE J512, UL, has a length of 1 17/32 inch, a maximum operating pressure of 1,000 psi and is designed for the following applications: air, inert gases, non-combustible gases, non-potable water. It has an operating temperature of 65 Degrees F to 200 Degrees F, and is made of brass. In addition, it is a straight connector, with an imperial system of measurement. Plus, it has a 9/16 inch hex size.

This compression series male connector meets the standards for SAE J512, UL, has a length of 1 7/16 inch, a maximum operating pressure of 1,000 psi and is designed for the following applications: air, inert gases, non-combustible gases, potable water. It has an operating temperature of 65 Degrees F to 200 Degrees F, and is made of brass. In addition, it is a straight adapter, with an imperial system of measurement. Plus, it has a 11/16 inch hex size.

This compression series male connector meets the standards for SAE J512, UL, has a length of 1 7/16 inch, a maximum operating pressure of 1,000 psi and is designed for the following applications: air, inert gases, non-combustible gases, potable water. It has an operating temperature of 65 Degrees F to 200 Degrees F, and is made of brass. In addition, it is a straight adapter, with an imperial system of measurement. Plus, it has a 11/16 inch hex size.