Product ITEM is unavailable. See products from the same category below.
Ball Valve Lockout Devices
Ball valve lockout devices install over the handle to prevent it from being turned and equipment energized while it's locked out for maintenance. A padlock is installed through the lockout to ensure it isn't removed by unauthorized personnel. These devices are an integral part of a facility lockout/tagout (LOTO) procedure designed to meet the OSHA standard for the Control of Hazardous Energy (Lockout/Tagout).
Lockout Ball Valve, Length (In.) 5.2, Height (In.) 3.4, Width (In.) 3.2, Material Polypropylene, Color Green, Max. Shackle Dia. (In.) 3/8, Use With Valves and Pipes, Includes 2 Ball Valve Lockout Halves (Part X And Y)
Lockout Ball Valve, Length (In.) 5.2, Height (In.) 3.4, Width (In.) 3.2, Material Polypropylene, Color Green, Max. Shackle Dia. (In.) 3/8, Use With Valves and Pipes, Includes 2 Ball Valve Lockout Halves (Part X And Y)
This ball valve lockout is made of nylon and it is red. It is chemical resistant, impact resistant and measures 0.9 inch D x 5 3/5 inch H x 6 1/5 inch W. This ball valve lockout is for use with 1/3 inch diameter padlocks.
This ball valve lockout is made of nylon and it is red. It is chemical resistant, impact resistant and measures 0.9 inch D x 5 3/5 inch H x 6 1/5 inch W. This ball valve lockout is for use with 1/3 inch diameter padlocks.
This ball valve lockout is made of nylon and it is red. It is chemical resistant, impact resistant and measures 1.55 inch D x 6 3/8 inch H x 9 23/25 inch W. This ball valve lockout is for use with 1/3 inch diameter padlocks.
This ball valve lockout is made of nylon and it is red. It is chemical resistant, impact resistant and measures 1.55 inch D x 6 3/8 inch H x 9 23/25 inch W. This ball valve lockout is for use with 1/3 inch diameter padlocks.
Lockout, Large Ball Valve, Polypropylene Material, Color Blue, Legend -, Locking Holes -, Temp. Range -, OSHA 1910.147 Standards, Use With Pipes 2 In. to 8 In. dia., Includes
Lockout, Large Ball Valve, Polypropylene Material, Color Blue, Legend -, Locking Holes -, Temp. Range -, OSHA 1910.147 Standards, Use With Pipes 2 In. to 8 In. dia., Includes
This ball valve lockout is made of polypropylene and it is red. It is chemical resistant, meets the standards for ANSI Z24, OSHA 29 CFR 1910.147. In addition, it features: large ball valve lockout device locks out pipes, equipping your employees with the proper lockout tools and warning devices can save lives, measures 12 inch D x 8 2/3 inch H x 4 11/25 inch W. This ball valve lockout is for use with quarter turn handles, 9/16 inch diameter padlocks.
This ball valve lockout is made of polypropylene and it is red. It is chemical resistant, meets the standards for ANSI Z24, OSHA 29 CFR 1910.147. In addition, it features: large ball valve lockout device locks out pipes, equipping your employees with the proper lockout tools and warning devices can save lives, measures 12 inch D x 8 2/3 inch H x 4 11/25 inch W. This ball valve lockout is for use with quarter turn handles, 9/16 inch diameter padlocks.
This ball valve lockout is made of steel and it is red. It is chemical resistant, meets the standards for ANSI Z24, OSHA 29 CFR 1910.147. In addition, it features: one-time installation is easy to complete in just a few minutes, permanently mounts to valve body or pipe, equipping your employees with the proper lockout tools, measures 2.23 inch D x 3 17/27 inch H x 6 16/39 inch W. This ball valve lockout is for use with quarter turn handles, 5/16 inch diameter padlocks.
This ball valve lockout is made of steel and it is red. It is chemical resistant, meets the standards for ANSI Z24, OSHA 29 CFR 1910.147. In addition, it features: one-time installation is easy to complete in just a few minutes, permanently mounts to valve body or pipe, equipping your employees with the proper lockout tools, measures 2.23 inch D x 3 17/27 inch H x 6 16/39 inch W. This ball valve lockout is for use with quarter turn handles, 5/16 inch diameter padlocks.
This ball valve lockout is made of steel and it is red. It is chemical resistant, meets the standards for ANSI Z24, OSHA 29 CFR 1910.147. In addition, it features: one-time installation is easy to complete in just a few minutes, permanently mounts to valve body or pipe, equipping your employees with the proper lockout tools, measures 1.95 inch D x 2 1/5 inch H x 4 13/50 inch W. This ball valve lockout is for use with quarter turn handles, 5/16 inch diameter padlocks.
This ball valve lockout is made of steel and it is red. It is chemical resistant, meets the standards for ANSI Z24, OSHA 29 CFR 1910.147. In addition, it features: one-time installation is easy to complete in just a few minutes, permanently mounts to valve body or pipe, equipping your employees with the proper lockout tools, measures 1.95 inch D x 2 1/5 inch H x 4 13/50 inch W. This ball valve lockout is for use with quarter turn handles, 5/16 inch diameter padlocks.
Lockout Ball Valve, Length (In.) 5.2, Height (In.) 3.4, Width (In.) 3.2, Material Polypropylene, Color Blue, Max. Shackle Dia. (In.) 3/8, Use With Valves and Pipes, Includes 2 Ball Valve Lockout Halves (Part X And Y)
Lockout Ball Valve, Length (In.) 5.2, Height (In.) 3.4, Width (In.) 3.2, Material Polypropylene, Color Blue, Max. Shackle Dia. (In.) 3/8, Use With Valves and Pipes, Includes 2 Ball Valve Lockout Halves (Part X And Y)
This ball valve lockout is made of ABS plastic and it is red. It meets the standards for OSHA 1910.147. In addition, it features: adjustable slides to ensure proper fit, fits most t-handle valves, measures 1.75 inch D x 1¾ inch H x 4¼ inch W, and includes label. This ball valve lockout is for use with t-handles, 7/25 inch diameter padlocks. The legend message is: Danger Locked Out Do Not Remove.
This ball valve lockout is made of ABS plastic and it is red. It meets the standards for OSHA 1910.147. In addition, it features: adjustable slides to ensure proper fit, fits most t-handle valves, measures 1.75 inch D x 1¾ inch H x 4¼ inch W, and includes label. This ball valve lockout is for use with t-handles, 7/25 inch diameter padlocks. The legend message is: Danger Locked Out Do Not Remove.
This ball valve lockout is made of ABS plastic and it is red. It meets the standards for OSHA 1910.147. In addition, it features: adjustable slides to ensure proper fit, fits most t-handle valves, measures 2 inch D x 2 inch H x 6¼ inch W, and includes label. This ball valve lockout is for use with t-handles, 7/25 inch diameter padlocks. The legend message is: Danger Locked Out Do Not Remove.
This ball valve lockout is made of ABS plastic and it is red. It meets the standards for OSHA 1910.147. In addition, it features: adjustable slides to ensure proper fit, fits most t-handle valves, measures 2 inch D x 2 inch H x 6¼ inch W, and includes label. This ball valve lockout is for use with t-handles, 7/25 inch diameter padlocks. The legend message is: Danger Locked Out Do Not Remove.
This ball valve lockout is made of polypropylene and it is red. It is chemical resistant, meets the standards for ANSI Z24, OSHA 29 CFR 1910.147. In addition, it features: four-legged ball valve lockout devices lock out pipes, measures 3.05 inch D x 4 4/57 inch H x 5 9/31 inch W, and includes 2 ball valve lockout halves (part x and y). This ball valve lockout is for use with quarter turn handles, 3/8 inch diameter padlocks.
This ball valve lockout is made of polypropylene and it is red. It is chemical resistant, meets the standards for ANSI Z24, OSHA 29 CFR 1910.147. In addition, it features: four-legged ball valve lockout devices lock out pipes, measures 3.05 inch D x 4 4/57 inch H x 5 9/31 inch W, and includes 2 ball valve lockout halves (part x and y). This ball valve lockout is for use with quarter turn handles, 3/8 inch diameter padlocks.
This ball valve lockout is made of polypropylene and it is yellow. It is chemical resistant, meets the standards for ANSI and OSHA. In addition, it features: small ball valve lockout device locks out pipes, equipping your employees with the proper lockout tools, world leader in lockout/tagout products and services offering industry expertise, measures 4.65 inch D x 8 33/50 inch H x 12 inch W. This ball valve lockout is for use with quarter turn handles, 9/16 inch diameter padlocks.
This ball valve lockout is made of polypropylene and it is yellow. It is chemical resistant, meets the standards for ANSI and OSHA. In addition, it features: small ball valve lockout device locks out pipes, equipping your employees with the proper lockout tools, world leader in lockout/tagout products and services offering industry expertise, measures 4.65 inch D x 8 33/50 inch H x 12 inch W. This ball valve lockout is for use with quarter turn handles, 9/16 inch diameter padlocks.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
