Product ITEM is unavailable. See products from the same category below.
Ball-Peen & Cross-Peen Hammers
Ball- and cross-peen hammers provide a dual-purpose head with a flat, striking face at one end and a peened, shaping face at the other end. The flat face flattens sheet metal, sets rivets, and drives punches and chisels. The peened face bends, shapes, and stretches metal surfaces. Peening hammers are commonly used in metalworking.
This blacksmith hammer has a width of 127.5 mm, and a length of 15 inch with a four-pound head weight and a wood handle. In addition, it is made of carbon steel, plus it is not non-sparking, with a plain grip.
This blacksmith hammer has a width of 127.5 mm, and a length of 15 inch with a four-pound head weight and a wood handle. In addition, it is made of carbon steel, plus it is not non-sparking, with a plain grip.
This blacksmith hammer has a width of 1⅞ inch, and a length of 15 inch with a four-pound head weight with a fibreglass handle. In addition, it is made of medium carbon steel, plus it is not non-sparking, with a textured grip.
This blacksmith hammer has a width of 1⅞ inch, and a length of 15 inch with a four-pound head weight with a fibreglass handle. In addition, it is made of medium carbon steel, plus it is not non-sparking, with a textured grip.
This ball peen hammer has a length of 13 inch with a 16 ounce head weight and a steel handle. In addition, it is made of steel, plus it is non-sparking, with a textured grip.
This ball peen hammer has a length of 13 inch with a 16 ounce head weight and a steel handle. In addition, it is made of steel, plus it is non-sparking, with a textured grip.
This ball peen hammer has a length of 14 inch with a 32 ounce head weight and a steel handle. In addition, it is made of steel, plus it is non-sparking, with a textured grip.
This ball peen hammer has a length of 14 inch with a 32 ounce head weight and a steel handle. In addition, it is made of steel, plus it is non-sparking, with a textured grip.
This cross peen hammer has a width of 1 9/16 inch, and a length of 15 inch with a two-pound head weight. The fibreglass handle is yellow. It meets the standards for ANSI. In addition, it is made of steel, plus it is not non-sparking, with a textured grip.
This cross peen hammer has a width of 1 9/16 inch, and a length of 15 inch with a two-pound head weight. The fibreglass handle is yellow. It meets the standards for ANSI. In addition, it is made of steel, plus it is not non-sparking, with a textured grip.
This blacksmith hammer has a width of 1 9/16 inch, and a length of 15 inch with a 2½-pound head weight with a fibreglass handle. In addition, it is made of carbon steel, plus it is not non-sparking, with a textured grip.
This blacksmith hammer has a width of 1 9/16 inch, and a length of 15 inch with a 2½-pound head weight with a fibreglass handle. In addition, it is made of carbon steel, plus it is not non-sparking, with a textured grip.
This ball peen hammer set has a length of 12½ inch, 14½ inch with a 340 g, 680 g head weight and a wood handle. In addition, it is not non-sparking, with a plain grip. This ball peen hammer set is designed for: 12 ounce ball peen, 24 ounce ball peen.
This ball peen hammer set has a length of 12½ inch, 14½ inch with a 340 g, 680 g head weight and a wood handle. In addition, it is not non-sparking, with a plain grip. This ball peen hammer set is designed for: 12 ounce ball peen, 24 ounce ball peen.
This cross peen hammer has a width of 1⅞ inch, and a length of 15 inch with a four-pound head weight. The fibreglass handle is yellow. It meets the standards for ANSI. In addition, it is made of steel, plus it is not non-sparking, with a textured grip.
This cross peen hammer has a width of 1⅞ inch, and a length of 15 inch with a four-pound head weight. The fibreglass handle is yellow. It meets the standards for ANSI. In addition, it is made of steel, plus it is not non-sparking, with a textured grip.
This ball peen hammer has a length of 12 inch with a 8 ounce head weight and a wood handle. In addition, it is made of steel, plus it is non-sparking, with a plain grip.
This ball peen hammer has a length of 12 inch with a 8 ounce head weight and a wood handle. In addition, it is made of steel, plus it is non-sparking, with a plain grip.
This ball peen hammer has a length of 16 inch with a 24 ounce head weight and a wood handle. In addition, it is made of steel, plus it is non-sparking, with a plain grip.
This ball peen hammer has a length of 16 inch with a 24 ounce head weight and a wood handle. In addition, it is made of steel, plus it is non-sparking, with a plain grip.
This cross peen hammer has a width of 1 11/16 inch, and a length of 15 inch with a three-pound head weight. The fibreglass handle is yellow. It meets the standards for ANSI. In addition, it is made of steel, plus it is not non-sparking, with a textured grip.
This cross peen hammer has a width of 1 11/16 inch, and a length of 15 inch with a three-pound head weight. The fibreglass handle is yellow. It meets the standards for ANSI. In addition, it is made of steel, plus it is not non-sparking, with a textured grip.
This ball peen hammer has a length of 11 inch with a 12 ounce head weight and a steel handle. In addition, it is made of steel, plus it is non-sparking, with a textured grip.
This ball peen hammer has a length of 11 inch with a 12 ounce head weight and a steel handle. In addition, it is made of steel, plus it is non-sparking, with a textured grip.
This blacksmith hammer has a width of 122.5 mm, and a length of 14 inch with a 2½-pound head weight and a wood handle. In addition, it is made of medium carbon steel, plus it is not non-sparking, with a plain grip.
This blacksmith hammer has a width of 122.5 mm, and a length of 14 inch with a 2½-pound head weight and a wood handle. In addition, it is made of medium carbon steel, plus it is not non-sparking, with a plain grip.
This ball peen hammer has a length of 13 inch with a 4 ounce head weight and a wood handle. It features induction hardened. In addition, it is made of steel, plus it is non-sparking, with a plain grip.
This ball peen hammer has a length of 13 inch with a 4 ounce head weight and a wood handle. It features induction hardened. In addition, it is made of steel, plus it is non-sparking, with a plain grip.
This hammer has a length of 16 inch with a 40 ounce head weight with a fibreglass handle. It features ergonomic handle. In addition, it is made of steel, plus it is non-sparking, with a textured grip.
This hammer has a length of 16 inch with a 40 ounce head weight with a fibreglass handle. It features ergonomic handle. In addition, it is made of steel, plus it is non-sparking, with a textured grip.
This hammer has a length of 15 inch with a 32 ounce head weight with a fibreglass handle. It features ergonomic handle. In addition, it is made of steel, plus it is non-sparking, with a textured grip.
This hammer has a length of 15 inch with a 32 ounce head weight with a fibreglass handle. It features ergonomic handle. In addition, it is made of steel, plus it is non-sparking, with a textured grip.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
