Usinage
Perçage
Forets
Forets pour le métal et le plastique
Forets courts
Forets courts en acier rapide
Forets courts en acier rapide sans canal de refroidissement conforme aux spécifications de la norme National Aerospace Standard pour l'aérospatiale
Close

Filter Results By

Applied Filters

Clear All

Brand
CHICAGO-LATROBE

Search within these results

Magasiner Par

In Stock Now (74)

Brand

CHICAGO-LATROBE CHICAGO-LATROBE (547)
CLEVELAND CLEVELAND (239)
DRILLCO DRILLCO (230)

Price

Under $10 Under $10 (333)
$10 - $15 $10 - $15 (79)
$15 - $20 $15 - $20 (34)
$20 - $25 $20 - $25 (27)
$25 - $30 $25 - $30 (29)
$30 - $35 $30 - $35 (11)
$35 - $40 (12)

$40 - $50 (17)

$50 - $60 (4)

$60 - $70 (1)
View more View less

Système de mesure

Fractional Inch Fractional Inch (131)
Imperial Imperial (1)
Letter Letter (98)
Metric Metric (68)
Wire Wire (249)

Taille de foret

#1 #1 (4)
#2 #2 (4)
#3 #3 (4)
#4 #4 (4)
#5 #5 (4)
#6 #6 (4)
#7 (4)

#8 (4)

#9 (4)

#10 (4)

#11 (4)

#12 (5)

#13 (4)

#14 (4)

#15 (4)

#16 (4)

#17 (4)

#18 (4)

#19 (4)

#20 (4)

#21 (4)

#22 (4)

#23 (4)

#24 (4)

#25 (4)

#26 (4)

#27 (4)

#28 (4)

#29 (4)

#30 (4)

#31 (4)

#32 (4)

#33 (4)

#34 (4)

#35 (4)

#36 (4)

#37 (4)

#38 (4)

#39 (4)

#40 (4)

#41 (4)

#42 (4)

#43 (4)

#44 (4)

#45 (4)

#46 (4)

#47 (4)

#48 (4)

#49 (4)

#50 (4)

#51 (4)

#52 (4)

#53 (2)

#54 (2)

#55 (2)

#56 (2)

#57 (2)

#58 (2)

#59 (2)

#60 (2)

#61 (2)

#62 (2)

#63 (2)

#64 (2)

#65 (1)

#66 (1)

#67 (1)

#68 (1)

#69 (1)

#70 (1)

#71 (1)

#72 (1)

#73 (1)

#74 (1)

#75 (1)

#76 (1)

#77 (1)

#78 (1)

#79 (1)

#80 (1)

1/64 in (1)

1/32 in (4)

3/64 in (4)

1/16 in (4)

5/64 in (4)

3/32 in (5)

7/64 in (5)

1/8 in (5)

9/64 in (5)

5/32 in (4)

11/64 in (4)

3/16 in (4)

13/64 in (4)

7/32 in (4)

15/64 in (5)

1/4 in (4)

17/64 in (4)

9/32 in (6)

19/64 in (4)

5/16 in (4)

21/64 in (4)

11/32 in (4)

23/64 in (4)

3/8 in (4)

25/64 in (4)

13/32 in (4)

27/64 in (4)

7/16 in (4)

29/64 in (4)

15/32 in (4)

31/64 in (4)

1/2 in (4)

1.00 mm (1)

1.10 mm (1)

1.20 mm (1)

1.40 mm (1)

1.5 mm (1)

1.50 mm (1)

1.60 mm (1)

1.70 mm (1)

1.90 mm (1)

2.00 mm (1)

2.10 mm (1)

2.20 mm (1)

2.40 mm (1)

2.5 mm (1)

2.50 mm (1)

2.60 mm (1)

2.70 mm (1)

2.80 mm (1)

2.90 mm (1)

3 mm (1)

3.00 mm (1)

3.10 mm (1)

3.20 mm (1)

3.30 mm (1)

3.50 mm (1)

3.60 mm (1)

3.70 mm (1)

3.80 mm (1)

3.90 mm (1)

4.00 mm (1)

4.10 mm (1)

4.20 mm (1)

4.30 mm (1)

4.50 mm (1)

4.60 mm (1)

4.90 mm (1)

5.00 mm (1)

5.10 mm (1)

5.20 mm (1)

5.40 mm (1)

5.50 mm (1)

5.60 mm (1)

5.70 mm (1)

6.00 mm (1)

6.10 mm (1)

6.20 mm (1)

6.40 mm (1)

6.50 mm (1)

6.60 mm (1)

6.70 mm (1)

6.80 mm (1)

6.90 mm (1)

7.00 mm (1)

7.5 mm (1)

7.50 mm (1)

8.00 mm (1)

8.50 mm (1)

9.00 mm (1)

9.50 mm (1)

10.00 mm (1)

10.20 mm (1)

10.50 mm (1)

11.00 mm (1)

11.5 mm (1)

11.50 mm (1)

12.00 mm (1)

12.50 mm (1)

13.00 mm (1)

A (4)

B (4)

C (4)

D (4)

F (4)

G (4)

H (4)

I (4)

J (4)

K (2)

L (4)

M (4)

N (4)

O (4)

P (4)

Q (4)

R (4)

S (4)

T (4)

U (4)

V (4)

W (4)

X (4)

Y (4)

Z (4)
View more View less

Équivalent décimal

0.0135 0.0135 (1)
0.0145 0.0145 (1)
0.0156 0.0156 (1)
0.016 0.016 (1)
0.018 0.018 (1)
0.02 0.02 (1)
0.021 (1)

0.0225 (1)

0.024 (1)

0.025 (1)

0.026 (1)

0.028 (1)

0.0292 (1)

0.031 (1)

0.0313 (4)

0.032 (1)

0.033 (1)

0.035 (1)

0.036 (2)

0.037 (2)

0.038 (2)

0.039 (2)

0.0394 (1)

0.04 (2)

0.041 (2)

0.042 (2)

0.043 (2)

0.0433 (1)

0.0465 (2)

0.0469 (4)

0.0472 (1)

0.052 (2)

0.055 (2)

0.0551 (1)

0.0591 (1)

0.0595 (2)

0.0625 (4)

0.063 (1)

0.0635 (4)

0.0669 (1)

0.067 (4)

0.07 (4)

0.073 (4)

0.0748 (1)

0.076 (4)

0.0781 (4)

0.0785 (4)

0.0787 (1)

0.081 (4)

0.082 (4)

0.0827 (1)

0.086 (4)

0.0866 (1)

0.089 (4)

0.0935 (4)

0.0938 (5)

0.0945 (1)

0.096 (4)

0.098 (4)

0.0984 (1)

0.0995 (4)

0.1015 (4)

0.1024 (1)

0.104 (4)

0.1063 (1)

0.1065 (4)

0.1094 (5)

0.11 (4)

0.1102 (1)

0.111 (4)

0.113 (4)

0.1142 (1)

0.116 (4)

0.1181 (1)

0.12 (4)

0.122 (1)

0.125 (4)

0.126 (1)

0.1285 (4)

0.1299 (1)

0.136 (4)

0.1378 (1)

0.1405 (4)

0.1406 (5)

0.1417 (1)

0.144 (4)

0.1457 (1)

0.147 (4)

0.1495 (4)

0.1496 (1)

0.152 (4)

0.1535 (1)

0.154 (4)

0.1563 (4)

0.157 (4)

0.1575 (1)

0.159 (4)

0.161 (4)

0.1614 (1)

0.1654 (1)

0.166 (4)

0.1693 (1)

0.1695 (4)

0.1719 (4)

0.173 (4)

0.177 (4)

0.1772 (1)

0.18 (4)

0.1811 (1)

0.182 (4)

0.185 (4)

0.1875 (4)

0.189 (5)

0.191 (4)

0.1929 (1)

0.1935 (4)

0.196 (4)

0.1969 (1)

0.199 (4)

0.2008 (1)

0.201 (4)

0.2031 (4)

0.204 (4)

0.2047 (1)

0.2055 (4)

0.209 (4)

0.2126 (1)

0.213 (4)

0.2165 (1)

0.2188 (4)

0.2205 (1)

0.221 (4)

0.2244 (1)

0.228 (4)

0.234 (4)

0.2344 (5)

0.2362 (1)

0.238 (4)

0.2402 (1)

0.242 (4)

0.2441 (1)

0.246 (4)

0.25 (4)

0.252 (1)

0.2559 (1)

0.257 (4)

0.2598 (1)

0.261 (4)

0.2638 (1)

0.2656 (4)

0.266 (4)

0.2677 (1)

0.2717 (1)

0.272 (4)

0.2756 (1)

0.277 (4)

0.281 (2)

0.2813 (6)

0.29 (4)

0.295 (4)

0.2953 (1)

0.2969 (4)

0.302 (4)

0.3125 (4)

0.315 (1)

0.316 (4)

0.323 (4)

0.3281 (4)

0.332 (4)

0.3346 (1)

0.339 (4)

0.3438 (4)

0.348 (4)

0.3543 (1)

0.358 (4)

0.3594 (4)

0.368 (4)

0.374 (1)

0.375 (4)

0.377 (4)

0.386 (4)

0.3906 (4)

0.3937 (1)

0.397 (4)

0.4016 (1)

0.404 (4)

0.4063 (4)

0.413 (4)

0.4134 (1)

0.4219 (4)

0.4331 (1)

0.4375 (4)

0.4528 (1)

0.4531 (4)

0.4688 (4)

0.4724 (1)

0.4844 (4)

0.4921 (1)

0.5 (4)

0.5118 (1)

0.0591 in (1)

0.0984 in (1)

0.1181 in (1)

0.1250 in (1)

0.2953 in (1)

0.4528 in (1)
View more View less

Finition - usinage

Black Oxide Black Oxide (189)
Steam Oxide Steam Oxide (6)
TiAlN TiAlN (108)
TiCN TiCN (108)
TiN TiN (136)

Normes

ANSI ANSI (226)
ANSI, NAS 907 Type B ANSI, NAS 907 Type B (4)
NAS 907 Type B NAS 907 Type B (312)
Not Rated Not Rated (1)

Type de pointe du foret

Radial Point Radial Point (1)
Split Point Split Point (546)

Longueur de goujure

1/8 in 1/8 in (2)
3/16 in 3/16 in (4)
1/4 in 1/4 in (2)
5/16 in 5/16 in (2)
3/8 in 3/8 in (2)
1/2 in 1/2 in (8)
5/8 in (7)

11/16 in (8)

0.7087 in (1)

3/4 in (8)

7/8 in (14)

1 in (24)

1 1/8 in (12)

1.1811 in (1)

1 1/4 in (13)

1.2992 in (1)

1 3/8 in (12)

1 7/16 in (12)

1 1/2 in (17)

1 5/8 in (17)

1 3/4 in (13)

1 7/8 in (12)

2 in (16)

2 1/8 in (20)

2 3/16 in (16)

2 5/16 in (16)

2 7/16 in (20)

2 1/2 in (20)

2 5/8 in (17)

2.7165 in (1)

2 3/4 in (16)

2 7/8 in (24)

2 15/16 in (12)

3 1/16 in (12)

3 3/16 in (8)

3 5/16 in (8)

3 7/16 in (12)

3 1/2 in (12)

3 5/8 in (12)

3.7008 in (1)

3 3/4 in (12)

3 7/8 in (12)

3 15/16 in (4)

4 1/16 in (4)

4 3/16 in (4)

4 5/16 in (4)

4 3/8 in (4)

4 1/2 in (4)

12.00 mm (1)

14.00 mm (1)

16.00 mm (1)

18.00 mm (2)

20.00 mm (2)

22.00 mm (1)

24.00 mm (2)

27.00 mm (1)

30.00 mm (3)

33.00 mm (4)

36.00 mm (3)

39.00 mm (3)

43.00 mm (5)

47.00 mm (3)

52.00 mm (5)

57.00 mm (5)

63.00 mm (6)

69.00 mm (4)

75.00 mm (2)

81.00 mm (2)

87.00 mm (3)

94.00 mm (2)

101.00 mm (3)
View more View less

Diamètre de tige

1/64 in 1/64 in (18)
1/32 in 1/32 in (21)
3/64 in 3/64 in (10)
0.0591 in 0.0591 in (1)
1/16 in 1/16 in (28)
5/64 in 5/64 in (24)
3/32 in (29)

0.0984 in (1)

7/64 in (25)

0.1181 in (1)

1/8 in (22)

9/64 in (24)

5/32 in (20)

11/64 in (24)

3/16 in (32)

13/64 in (16)

7/32 in (16)

15/64 in (17)

1/4 in (16)

17/64 in (20)

9/32 in (8)

0.2953 in (1)

19/64 in (8)

5/16 in (16)

21/64 in (8)

11/32 in (12)

23/64 in (8)

3/8 in (16)

25/64 in (12)

13/32 in (4)

27/64 in (4)

7/16 in (8)

0.4528 in (1)

15/32 in (4)

31/64 in (4)

1/2 in (4)

1 3/32 in (1)

1 3/16 in (1)

1 25/64 in (1)

1 1/2 in (1)

1 19/32 in (1)

1 11/16 in (1)

1 57/64 in (1)

1 mm (1)

2 mm (1)

2.1 mm (1)

2.2 mm (1)

2.4 mm (1)

2.5 mm (1)

2.6 mm (1)

2.7 mm (1)

2.8 mm (1)

2.9 mm (1)

3 mm (1)

3.1 mm (1)

3.2 mm (1)

3.3 mm (1)

3.5 mm (1)

3.6 mm (1)

3.7 mm (1)

3.8 mm (1)

3.9 mm (1)

4 mm (1)

4.1 mm (1)

4.2 mm (1)

4.3 mm (1)

4.5 mm (1)

4.6 mm (1)

4.8 mm (1)

4.9 mm (1)

5 mm (1)

5.1 mm (1)

5.2 mm (1)

5.4 mm (1)

5.5 mm (1)

5.6 mm (1)

5.7 mm (1)

6 mm (1)

6.1 mm (1)

6.2 mm (1)

6.4 mm (1)

6.5 mm (1)

6.6 mm (1)

6.7 mm (1)

6.8 mm (1)

6.9 mm (1)

7 mm (1)

7.5 mm (1)

8 mm (1)

8.5 mm (1)

9 mm (1)

9.5 mm (1)

10 mm (1)

10.2 mm (1)

10.5 mm (1)

11 mm (1)

11.5 mm (1)

12 mm (1)

12.5 mm (1)

13 mm (1)
View more View less

Longueur hors tout

3/4 in 3/4 in (3)
7/8 in 7/8 in (3)
1 in 1 in (2)
1 1/8 in 1 1/8 in (2)
1 1/4 in 1 1/4 in (2)
1 3/8 in 1 3/8 in (8)
1 1/2 in (7)

1.575 in (1)

1 5/8 in (8)

1 3/4 in (8)

1 7/8 in (14)

2 in (24)

2 1/8 in (12)

2.244 in (1)

2 1/4 in (12)

2 3/8 in (12)

2.402 in (1)

2 1/2 in (12)

2 5/8 in (16)

2 3/4 in (16)

2 7/8 in (12)

3 in (12)

3 1/8 in (16)

3 1/4 in (20)

3 3/8 in (16)

3 1/2 in (16)

3 5/8 in (20)

3 3/4 in (20)

3 7/8 in (16)

4 in (16)

4 1/8 in (24)

4 1/4 in (12)

4.291 in (1)

4 3/8 in (12)

4 1/2 in (8)

4 5/8 in (8)

4 3/4 in (12)

4 7/8 in (12)

5 in (12)

5 1/8 in (12)

5 1/4 in (12)

5 3/8 in (4)

5 1/2 in (4)

5.591 in (1)

5 5/8 in (4)

5 3/4 in (4)

5 7/8 in (4)

6 in (9)

34.00 mm (1)

36.00 mm (1)

38.00 mm (1)

40.00 mm (2)

43.00 mm (2)

46.00 mm (1)

49.00 mm (2)

53.00 mm (1)

57.00 mm (3)

61.00 mm (4)

65.00 mm (3)

70.00 mm (3)

75.00 mm (5)

80.00 mm (3)

86.00 mm (5)

93.00 mm (5)

101.00 mm (6)

109.00 mm (4)

117.00 mm (2)

125.00 mm (2)

133.00 mm (3)

142.00 mm (2)

151.00 mm (3)
View more View less

Application - matière principale

Cast Iron, Stainless Steel, Steel Cast Iron, Stainless Steel, Steel (199)
Cast Iron, Stainless Steel, Steel, Titanium, Tool and Die Steel Cast Iron, Stainless Steel, Steel, Titanium, Tool and Die Steel (165)
Cast Iron, Stainless Steel, Steel, Tool and Die Steel Cast Iron, Stainless Steel, Steel, Tool and Die Steel (173)
Cast Iron, Steel Cast Iron, Steel (5)
Stainless Steel, Tool Steel, Alloy Steel, Titanium, Cast Iron Stainless Steel, Tool Steel, Alloy Steel, Titanium, Cast Iron (5)

Série

150ASP 150ASP (190)
150ASP-TA 150ASP-TA (108)
150ASP-TC 150ASP-TC (108)
150ASP-TN 150ASP-TN (136)

Forets courts en acier rapide sans canal de refroidissement conforme aux spécifications de la norme National Aerospace Standard pour l'aérospatiale

Ces forets en acier rapide de longueur utile sont conformes aux spécifications aérospatiales nationales (NAS) pour les forets utilisés dans la production et la réparation d’aéronefs. Ces forets ne sont pas munis d’orifices de refroidissement, de sorte qu’un tuyau séparé est nécessaire pour amener le liquide de refroidissement à l’extrémité du foret en cas de besoin. Les forets sont fabriqués en acier rapide. Ils offrent plus de flexibilité et absorbent plus de chocs et de vibrations que les forets en cobalt, en métal fritté et en carbure. Ils sont ainsi adaptés à une utilisation dans les perceuses manuelles et les outils électriques portatifs. Ils peuvent laisser une finition rugueuse sur le trou. Ces forets sont dotés de goujures hélicoïdales qui évacuent les copeaux au fur et à mesure que le foret perce la pièce. Les forets courts sont les plus souvent utilisés. Ils offrent un bon équilibre entre résistance et précision lors du perçage de matériaux divers.

https://catalogue.grainger.ca/?hybris=true

547 Results Found

In stock at branch(0)

Branch #

Change

Find a Branch

Sort results by:

Grid List

Results per page : 16 | 32 | 48

FORET COURT, FORET 7/64 PO, CANNELURE 1 1/2 PO LO, ACIER RAPIDE

CHICAGO-LATROBE
FORET COURT, FORET 7/64 PO, CANNELURE 1 1/2 PO LO, ACIER RAPIDE
Item # GNF42607
Mfr. Model # 42607

EHC: EHC :

Ce foret court est en acier rapide et a 7/64 po de diamètre/une tige de 1 1/8 po de long. Il est destiné à être utilisé avec de la fonte, de l'acier, du titane, de l'acier à outils/de matrices et répond aux normes NAS 907 type B. Ce foret de la série 150ASP-TA a un fini TiAIN et des mesures fractionnaires en po. Il est sans canal de refroidissement et mesure 2 5/8 po de long. De plus, il a deux cannelures hélicoïdales de 1 1/2 po, une tige droite et un angle de pointe de 135°.

Ce foret court est en acier rapide et a 7/64 po de diamètre/une tige de 1 1/8 po de long. Il est destiné à être utilisé avec de la fonte, de l'acier, du titane, de l'acier à outils/de matrices et répond aux normes NAS 907 type B. Ce foret de la série 150ASP-TA a un fini TiAIN et des mesures fractionnaires en po. Il est sans canal de refroidissement et mesure 2 5/8 po de long. De plus, il a deux cannelures hélicoïdales de 1 1/2 po, une tige droite et un angle de pointe de 135°.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

This product must be purchased in multiples of 12 . Please update the quantity to proceed with checkout.

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Compare

Web Price : $8.32 / CHAQUE

EHC: EHC :

Qty:

FORET COURT, FORET NO 5, CANNELURE 2 1/2 PO LONG, 3 3/4 PO LONG, ACIER RAPIDE

CHICAGO-LATROBE
FORET COURT, FORET NO 5, CANNELURE 2 1/2 PO LONG, 3 3/4 PO LONG, ACIER RAPIDE
Item # GNF150ASPTA42675
Mfr. Model # 42675

EHC: EHC :

Ce foret court en acier rapide à haut rendement a un diamètre de 13/64 po et une tige de 1 1/4 po de long. Il est destiné à être utilisé avec de la fonte, de l’acier, du titane, de l’acier à outils/à filières et respecte les normes ANSI. Ce foret de la série 150ASP-TA a un fini TiAIN et des mesures de fil. Il est sans canal de refroidissement et a une longueur de 3 3/4 po. De plus, il a deux cannelures hélicoïdales de 2 1/2 po, une tige droite et un angle de pointe de 135°.

Ce foret court en acier rapide à haut rendement a un diamètre de 13/64 po et une tige de 1 1/4 po de long. Il est destiné à être utilisé avec de la fonte, de l’acier, du titane, de l’acier à outils/à filières et respecte les normes ANSI. Ce foret de la série 150ASP-TA a un fini TiAIN et des mesures de fil. Il est sans canal de refroidissement et a une longueur de 3 3/4 po. De plus, il a deux cannelures hélicoïdales de 2 1/2 po, une tige droite et un angle de pointe de 135°.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

This product must be purchased in multiples of 12 . Please update the quantity to proceed with checkout.

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Compare

Web Price : $12.30 / CHAQUE

EHC: EHC :

Qty:

FORET COURT, FORET NO 16, CANNELURE 2 3/16 PO LO, 3 3/8 PO LONG, ACIER RAPIDE

CHICAGO-LATROBE
FORET COURT, FORET NO 16, CANNELURE 2 3/16 PO LO, 3 3/8 PO LONG, ACIER RAPIDE
Item # GNF150ASPTA42686
Mfr. Model # 42686

EHC: EHC :

This high-performance jobber length drill bit is made of high speed steel and has a 11/64 inch diameter, 1 3/16 inch long shank. It is for use with cast iron, steel, titanium, tool and die steel, and meets ANSI standards. This 150ASP-TA series jobber length drill bit has a TiAlN finish, and has wire measurements. It is non-coolant through with a 3⅜ inch length. Plus it has two 2 3/16 inch spiral flutes, a straight shank, and a 135 Degrees split point.

This high-performance jobber length drill bit is made of high speed steel and has a 11/64 inch diameter, 1 3/16 inch long shank. It is for use with cast iron, steel, titanium, tool and die steel, and meets ANSI standards. This 150ASP-TA series jobber length drill bit has a TiAlN finish, and has wire measurements. It is non-coolant through with a 3⅜ inch length. Plus it has two 2 3/16 inch spiral flutes, a straight shank, and a 135 Degrees split point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

This product must be purchased in multiples of 12 . Please update the quantity to proceed with checkout.

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Compare

Web Price : $10.54 / each

EHC: EHC :

Qty:

JOBBER LENGTH DRILL BIT, #20 DRILL BIT SIZE, 2⅛ IN FLUTE L, 3¼ IN L, HIGH SPEED STEEL

CHICAGO-LATROBE
JOBBER LENGTH DRILL BIT, #20 DRILL BIT SIZE, 2⅛ IN FLUTE L, 3¼ IN L, HIGH SPEED STEEL
Item # GNF150ASPTA42690
Mfr. Model # 42690

EHC: EHC :

This high-performance jobber length drill bit is made of high speed steel and has a 5/32 inch diameter, 1⅛ inch long shank. It is for use with cast iron, steel, titanium, tool and die steel, and meets ANSI standards. This 150ASP-TA series jobber length drill bit has a TiAlN finish, and has wire measurements. It is non-coolant through with a 3¼ inch length. Plus it has two 2⅛ inch spiral flutes, a straight shank, and a 135 Degrees split point.

This high-performance jobber length drill bit is made of high speed steel and has a 5/32 inch diameter, 1⅛ inch long shank. It is for use with cast iron, steel, titanium, tool and die steel, and meets ANSI standards. This 150ASP-TA series jobber length drill bit has a TiAlN finish, and has wire measurements. It is non-coolant through with a 3¼ inch length. Plus it has two 2⅛ inch spiral flutes, a straight shank, and a 135 Degrees split point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

This product must be purchased in multiples of 12 . Please update the quantity to proceed with checkout.

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Compare

Web Price : $9.11 / each

EHC: EHC :

Qty:

JOBBER LENGTH DRILL BIT, #29 DRILL BIT SIZE, 1¾ IN FLUTE L, 2⅞ IN L, HIGH SPEED STEEL

CHICAGO-LATROBE
JOBBER LENGTH DRILL BIT, #29 DRILL BIT SIZE, 1¾ IN FLUTE L, 2⅞ IN L, HIGH SPEED STEEL
Item # GNF150ASPTA42699
Mfr. Model # 42699

EHC: EHC :

This high-performance jobber length drill bit is made of high speed steel and has a ⅛ inch diameter, 1⅛ inch long shank. It is for use with cast iron, steel, titanium, tool and die steel, and meets ANSI standards. This 150ASP-TA series jobber length drill bit has a TiAlN finish, and has wire measurements. It is non-coolant through with a 2⅞ inch length. Plus it has two 1¾ inch spiral flutes, a straight shank, and a 135 Degrees split point.

This high-performance jobber length drill bit is made of high speed steel and has a ⅛ inch diameter, 1⅛ inch long shank. It is for use with cast iron, steel, titanium, tool and die steel, and meets ANSI standards. This 150ASP-TA series jobber length drill bit has a TiAlN finish, and has wire measurements. It is non-coolant through with a 2⅞ inch length. Plus it has two 1¾ inch spiral flutes, a straight shank, and a 135 Degrees split point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

This product must be purchased in multiples of 12 . Please update the quantity to proceed with checkout.

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Compare

Web Price : $8.44 / each

EHC: EHC :

Qty:

JOBBER LENGTH DRILL BIT, #36 DRILL BIT SIZE, 1-7/16 IN FLUTE L, 2½ IN LENGTH, HSS

CHICAGO-LATROBE
JOBBER LENGTH DRILL BIT, #36 DRILL BIT SIZE, 1-7/16 IN FLUTE L, 2½ IN LENGTH, HSS
Item # GNF150ASPTA42706
Mfr. Model # 42706

EHC: EHC :

This high-performance jobber length drill bit is made of high speed steel and has a 3/32 inch diameter, 1 1/16 inch long shank. It is for use with cast iron, steel, titanium, tool and die steel, and meets ANSI standards. This 150ASP-TA series jobber length drill bit has a TiAlN finish, and has wire measurements. It is non-coolant through with a 2½ inch length. Plus it has two 1 7/16 inch spiral flutes, a straight shank, and a 135 Degrees split point.

This high-performance jobber length drill bit is made of high speed steel and has a 3/32 inch diameter, 1 1/16 inch long shank. It is for use with cast iron, steel, titanium, tool and die steel, and meets ANSI standards. This 150ASP-TA series jobber length drill bit has a TiAlN finish, and has wire measurements. It is non-coolant through with a 2½ inch length. Plus it has two 1 7/16 inch spiral flutes, a straight shank, and a 135 Degrees split point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

This product must be purchased in multiples of 12 . Please update the quantity to proceed with checkout.

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Compare

Web Price : $7.93 / each

EHC: EHC :

Qty:

JOBBER LENGTH DRILL BIT, #48 DRILL BIT SIZE, 1 IN FLUTE L, 2 IN LENGTH, 4XD, HSS

CHICAGO-LATROBE
JOBBER LENGTH DRILL BIT, #48 DRILL BIT SIZE, 1 IN FLUTE L, 2 IN LENGTH, 4XD, HSS
Item # GNF150ASPTA42718
Mfr. Model # 42718

EHC: EHC :

This high-performance jobber length drill bit is made of high speed steel and has a 1/16 inch diameter, one-inch long shank. It is for use with cast iron, steel, titanium, tool and die steel, and meets ANSI standards. This 150ASP-TA series jobber length drill bit has a TiAlN finish, and has wire measurements. It is non-coolant through with a two-inch length. Plus it has two one-inch spiral flutes, a straight shank, and a 135 Degrees split point.

This high-performance jobber length drill bit is made of high speed steel and has a 1/16 inch diameter, one-inch long shank. It is for use with cast iron, steel, titanium, tool and die steel, and meets ANSI standards. This 150ASP-TA series jobber length drill bit has a TiAlN finish, and has wire measurements. It is non-coolant through with a two-inch length. Plus it has two one-inch spiral flutes, a straight shank, and a 135 Degrees split point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

This product must be purchased in multiples of 12 . Please update the quantity to proceed with checkout.

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Compare

Web Price : $6.75 / each

EHC: EHC :

Qty:

JOBBER LENGTH DRILL BIT, #50 DRILL BIT SIZE, 1 IN FLUTE L, 2 IN LENGTH, 4XD, HSS

CHICAGO-LATROBE
JOBBER LENGTH DRILL BIT, #50 DRILL BIT SIZE, 1 IN FLUTE L, 2 IN LENGTH, 4XD, HSS
Item # GNF150ASPTA42720
Mfr. Model # 42720

EHC: EHC :

This high-performance jobber length drill bit is made of high speed steel and has a 1/16 inch diameter, one-inch long shank. It is for use with cast iron, steel, titanium, tool and die steel, and meets ANSI standards. This 150ASP-TA series jobber length drill bit has a TiAlN finish, and has wire measurements. It is non-coolant through with a two-inch length. Plus it has two one-inch spiral flutes, a straight shank, and a 135 Degrees split point.

This high-performance jobber length drill bit is made of high speed steel and has a 1/16 inch diameter, one-inch long shank. It is for use with cast iron, steel, titanium, tool and die steel, and meets ANSI standards. This 150ASP-TA series jobber length drill bit has a TiAlN finish, and has wire measurements. It is non-coolant through with a two-inch length. Plus it has two one-inch spiral flutes, a straight shank, and a 135 Degrees split point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

This product must be purchased in multiples of 12 . Please update the quantity to proceed with checkout.

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Compare

Web Price : $6.51 / each

EHC: EHC :

Qty:

JOBBER LENGTH DRILL BIT, F DRILL BIT SIZE, 2⅞ IN FLUTE L, 4⅛ IN L, HIGH SPEED STEEL

CHICAGO-LATROBE
JOBBER LENGTH DRILL BIT, F DRILL BIT SIZE, 2⅞ IN FLUTE L, 4⅛ IN L, HIGH SPEED STEEL
Item # GNF150ASPTA42776
Mfr. Model # 42776

EHC: EHC :

This heavy-duty jobber length drill bit is made of high speed steel and has a ¼ inch diameter, 1¼ inch long shank. It is for use with cast iron, steel, titanium, tool and die steel, and meets ANSI standards. This 150ASP-TA series jobber length drill bit has a TiAlN finish, and has letter measurements. It is non-coolant through with a 4⅛ inch length. Plus it has two 2⅞ inch spiral flutes, a straight shank, and a 135 Degrees split point.

This heavy-duty jobber length drill bit is made of high speed steel and has a ¼ inch diameter, 1¼ inch long shank. It is for use with cast iron, steel, titanium, tool and die steel, and meets ANSI standards. This 150ASP-TA series jobber length drill bit has a TiAlN finish, and has letter measurements. It is non-coolant through with a 4⅛ inch length. Plus it has two 2⅞ inch spiral flutes, a straight shank, and a 135 Degrees split point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

This product must be purchased in multiples of 12 . Please update the quantity to proceed with checkout.

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Compare

Web Price : $15.12 / each

EHC: EHC :

Qty:

JOBBER LENGTH DRILL BIT, I DRILL BIT SIZE, 2⅞ IN FLUTE L, 4⅛ IN L, HIGH SPEED STEEL

CHICAGO-LATROBE
JOBBER LENGTH DRILL BIT, I DRILL BIT SIZE, 2⅞ IN FLUTE L, 4⅛ IN L, HIGH SPEED STEEL
Item # GNF150ASPTA42779
Mfr. Model # 42779

EHC: EHC :

This heavy-duty jobber length drill bit is made of high speed steel and has a 17/64 inch diameter, 1¼ inch long shank. It is for use with cast iron, steel, titanium, tool and die steel, and meets ANSI standards. This 150ASP-TA series jobber length drill bit has a TiAlN finish, and has letter measurements. It is non-coolant through with a 4⅛ inch length. Plus it has two 2⅞ inch spiral flutes, a straight shank, and a 135 Degrees split point.

This heavy-duty jobber length drill bit is made of high speed steel and has a 17/64 inch diameter, 1¼ inch long shank. It is for use with cast iron, steel, titanium, tool and die steel, and meets ANSI standards. This 150ASP-TA series jobber length drill bit has a TiAlN finish, and has letter measurements. It is non-coolant through with a 4⅛ inch length. Plus it has two 2⅞ inch spiral flutes, a straight shank, and a 135 Degrees split point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

This product must be purchased in multiples of 12 . Please update the quantity to proceed with checkout.

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Compare

Web Price : $20.46 / each

EHC: EHC :

Qty:

JOBBER LENGTH DRILL BIT, 2.2MM DRILL BIT SIZE, 27MM FLUTE L, HIGH SPEED STEEL

CHICAGO-LATROBE
JOBBER LENGTH DRILL BIT, 2.2MM DRILL BIT SIZE, 27MM FLUTE L, HIGH SPEED STEEL
Item # GNF150ASP45813
Mfr. Model # 45813

EHC: EHC :

This heavy-duty jobber length drill bit is made of high speed steel and has a 2.2 mm diameter, 26 mm long shank. It is for use with cast iron, steel, tool and die steel, and meets ANSI standards. This 150ASP series jobber length drill bit has a black oxide finish, and has metric measurements. It is non-coolant through with a 53mm length. Plus it has two 27mm spiral flutes, a straight shank, and a 135 Degrees split point.

This heavy-duty jobber length drill bit is made of high speed steel and has a 2.2 mm diameter, 26 mm long shank. It is for use with cast iron, steel, tool and die steel, and meets ANSI standards. This 150ASP series jobber length drill bit has a black oxide finish, and has metric measurements. It is non-coolant through with a 53mm length. Plus it has two 27mm spiral flutes, a straight shank, and a 135 Degrees split point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

This product must be purchased in multiples of 12 . Please update the quantity to proceed with checkout.

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Compare

Web Price : $3.25 / each

EHC: EHC :

Qty:

150ASP JOBBER LENGTH DRILL BIT, RH, BLACK OXIDE, 3 MM, 135 ° , HSS, 2.4 IN L, 28 MM SHANK, HD

CHICAGO-LATROBE
150ASP JOBBER LENGTH DRILL BIT, RH, BLACK OXIDE, 3 MM, 135 ° , HSS, 2.4 IN L, 28 MM SHANK, HD
Item # GNF150ASP45822
Mfr. Model # 45822

EHC: EHC :

This heavy-duty jobber length drill bit is made of high speed steel and has a 0.1181 inch diameter, 28 mm long shank. It is for use with alloy steel, cast iron, stainless steel, titanium, tool steel, and meets the standards for NAS 907 Type B. This 150ASP series jobber drill bit has a black oxide finish, and has metric measurements. It is non-coolant through with a 2.4016 inch length. Plus it has two 33mm spiral flutes, a straight shank, and a 135 Degrees split point.

This heavy-duty jobber length drill bit is made of high speed steel and has a 0.1181 inch diameter, 28 mm long shank. It is for use with alloy steel, cast iron, stainless steel, titanium, tool steel, and meets the standards for NAS 907 Type B. This 150ASP series jobber drill bit has a black oxide finish, and has metric measurements. It is non-coolant through with a 2.4016 inch length. Plus it has two 33mm spiral flutes, a straight shank, and a 135 Degrees split point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

This product must be purchased in multiples of 12 . Please update the quantity to proceed with checkout.

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Compare

Web Price : $3.34 / each

EHC: EHC :

Qty:

JOBBER LENGTH DRILL BIT, 4.2MM DRILL BIT SIZE, 43MM FLUTE L, HIGH SPEED STEEL

CHICAGO-LATROBE
JOBBER LENGTH DRILL BIT, 4.2MM DRILL BIT SIZE, 43MM FLUTE L, HIGH SPEED STEEL
Item # GNF150ASP45835
Mfr. Model # 45835

EHC: EHC :

This heavy-duty jobber length drill bit is made of high speed steel and has a 4.2 mm diameter, 32 mm long shank. It is for use with cast iron, steel, tool and die steel, and meets the standards for NAS 907 Type B. This 150ASP series jobber length drill bit has a black oxide finish, and has metric measurements. It is non-coolant through with a 75mm length. Plus it has two 43mm spiral flutes, a straight shank, and a 135 Degrees split point.

This heavy-duty jobber length drill bit is made of high speed steel and has a 4.2 mm diameter, 32 mm long shank. It is for use with cast iron, steel, tool and die steel, and meets the standards for NAS 907 Type B. This 150ASP series jobber length drill bit has a black oxide finish, and has metric measurements. It is non-coolant through with a 75mm length. Plus it has two 43mm spiral flutes, a straight shank, and a 135 Degrees split point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

This product must be purchased in multiples of 12 . Please update the quantity to proceed with checkout.

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Compare

Web Price : $4.47 / each

EHC: EHC :

Qty:

JOBBER LENGTH DRILL BIT, 29/64 IN DRILL BIT SIZE, 4-3/16 IN FLUTE L, TICN FINISH, HSS

CHICAGO-LATROBE
JOBBER LENGTH DRILL BIT, 29/64 IN DRILL BIT SIZE, 4-3/16 IN FLUTE L, TICN FINISH, HSS
Item # GNF150ASPTC43629
Mfr. Model # 43629

EHC: EHC :

This heavy-duty jobber length drill bit is made of high speed steel and has a 7/16 inch diameter, 1 7/16 inch long shank. It is for use with cast iron, steel, tool and die steel, and meets ANSI standards. This 150ASP-TC series jobber length drill bit has a TiCN finish, and has fractional inch measurements. It is non-coolant through with a 5⅝ inch length. Plus it has two 4 3/16 inch spiral flutes, a straight shank, and a 135 Degrees split point.

This heavy-duty jobber length drill bit is made of high speed steel and has a 7/16 inch diameter, 1 7/16 inch long shank. It is for use with cast iron, steel, tool and die steel, and meets ANSI standards. This 150ASP-TC series jobber length drill bit has a TiCN finish, and has fractional inch measurements. It is non-coolant through with a 5⅝ inch length. Plus it has two 4 3/16 inch spiral flutes, a straight shank, and a 135 Degrees split point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

This product must be purchased in multiples of 6 . Please update the quantity to proceed with checkout.

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Compare

Web Price : $46.24 / each

EHC: EHC :

Qty:

JOBBER LENGTH DRILL BIT, 21/64 IN DRILL BIT SIZE, 3-5/16 IN FLUTE L, TICN FINISH, HSS

CHICAGO-LATROBE
JOBBER LENGTH DRILL BIT, 21/64 IN DRILL BIT SIZE, 3-5/16 IN FLUTE L, TICN FINISH, HSS
Item # GNF150ASPTC43621
Mfr. Model # 43621

EHC: EHC :

This heavy-duty jobber length drill bit is made of high speed steel and has a 5/16 inch diameter, 1 5/16 inch long shank. It is for use with cast iron, steel, tool and die steel, and meets ANSI standards. This 150ASP-TC series jobber length drill bit has a TiCN finish, and has fractional inch measurements. It is non-coolant through with a 4⅝ inch length. Plus it has two 3 5/16 inch spiral flutes, a straight shank, and a 135 Degrees split point.

This heavy-duty jobber length drill bit is made of high speed steel and has a 5/16 inch diameter, 1 5/16 inch long shank. It is for use with cast iron, steel, tool and die steel, and meets ANSI standards. This 150ASP-TC series jobber length drill bit has a TiCN finish, and has fractional inch measurements. It is non-coolant through with a 4⅝ inch length. Plus it has two 3 5/16 inch spiral flutes, a straight shank, and a 135 Degrees split point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

This product must be purchased in multiples of 6 . Please update the quantity to proceed with checkout.

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Compare

Web Price : $26.14 / each

EHC: EHC :

Qty:

JOBBER LENGTH DRILL BIT, #38 DRILL BIT SIZE, 1-7/16 IN FLUTE L, 2½ IN LENGTH, HSS

CHICAGO-LATROBE
JOBBER LENGTH DRILL BIT, #38 DRILL BIT SIZE, 1-7/16 IN FLUTE L, 2½ IN LENGTH, HSS
Item # GNF150ASP-TN41708
Mfr. Model # 41708

EHC: EHC :

This jobber length drill bit is made of high speed steel and has a 3/32 inch diameter, 1 1/16 inch long shank. It is for use with cast iron, steel, and meets the standards for NAS 907 Type B. This 150ASP-TN series jobber length drill bit has a TiN finish, and has wire measurements. It is non-coolant through with a 2½ inch length. Plus it has two 1 7/16 inch spiral flutes, a straight shank, and a 135 Degrees split point.

This jobber length drill bit is made of high speed steel and has a 3/32 inch diameter, 1 1/16 inch long shank. It is for use with cast iron, steel, and meets the standards for NAS 907 Type B. This 150ASP-TN series jobber length drill bit has a TiN finish, and has wire measurements. It is non-coolant through with a 2½ inch length. Plus it has two 1 7/16 inch spiral flutes, a straight shank, and a 135 Degrees split point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

This product must be purchased in multiples of 12 . Please update the quantity to proceed with checkout.

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Compare

Web Price : $5.22 / each

EHC: EHC :

Qty:

Grid List

Results per page : 16 | 32 | 48

Availability

Pick Up

Shipping

To view Availability, please select a Branch

To view Availability for another location, please enter postal code below Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.

Select a Branch

Selected Branch

(View on Map)

Apply

Enter the city, province, postal code or branch number.

Cancel

Please select pick up location

No Result Found.

Selected Branch

,
,

Phone :
Fax :
Hours :

No Result Found.

New Postal Code

Postal Code should be in LNLNLN format e.g. L3T7W8

Add to Order List

Your items were added

Your items were added to some lists

Max quantity exceeded. The item could not be added to the following List(s)

No Existing List Found. Please Create New List below.

Your list has been created

Please select a list

Add to an existing list

My List

No Existing 'My List' Found. Please Create New 'My List' first.

No Results Found

Select one or multiple lists

Create a new list

List Name

My List

You have #compareProducts out of 5 products to compare selected.

Clear All

Add Item

Hide

Show

Filter Results By

Applied Filters

Clear All

Search within these results

Forets courts en acier rapide sans canal de refroidissement conforme aux spécifications de la norme National Aerospace Standard pour l'aérospatiale

547 Results Found

Add to Order List

Company Information

Resources

Services

Ordering

Customer Support

Item #	Qty

Filter Results By

Applied Filters Clear All

Search within these results

Forets courts en acier rapide sans canal de refroidissement conforme aux spécifications de la norme National Aerospace Standard pour l'aérospatiale

547 Results Found

Add to Order List

Company Information

Resources

Services

Ordering

Customer Support

Applied Filters

Clear All