Machining
Threading
Taps & Internal Threading Tools
Straight-Flute Taps
High-Speed Steel Straight-Flute Hand Taps
Close

Filter Results By

Applied Filters

Clear All

Brand
WIDIA GTD

Search within these results

Shop By

Country of Origin: Canada (4)

In Stock Now (311)

Brand

BRADY BRADY (1)
CLARKSON-OSBORN CLARKSON-OSBORN (331)
CLE-LINE CLE-LINE (117)
CLEVELAND CLEVELAND (380)
DRILLCO DRILLCO (39)
GREENFIELD INDUSTRIES GREENFIELD INDUSTRIES (2)
GREENFIELD THREADING (521)

IRWIN (3)

NORTH AMERICAN (10)

OSG (436)

SOWA TAPS (29)

SPEEDTAPS (5)

WALTER SURFACE TECHNOLOGIES (75)

WESTWARD (51)

WIDIA GTD (480)

WIDIA-GTD (16)

WIDIA METAL REMOVAL (8)

WIDIA PRODUCTS GROUP (1)
View more View less

Price

$10 - $15 $10 - $15 (111)
$15 - $20 $15 - $20 (85)
$20 - $25 $20 - $25 (37)
$25 - $30 $25 - $30 (31)
$30 - $35 $30 - $35 (16)
$35 - $40 $35 - $40 (13)
$40 - $50 (14)

$50 - $60 (21)

$60 - $70 (11)

$70 - $80 (15)

$80 - $90 (10)

$90 - $100 (19)

$100 - $200 (41)

$200 - $300 (23)

$300 - $400 (11)

$400 - $500 (11)

$500 - $600 (9)

$1000 - $1500 (1)

$1500 - $2000 (1)
View more View less

Thread Size

1/8"-27 1/8"-27 (1)
3/16"-24 3/16"-24 (2)
1/4"-20 1/4"-20 (17)
1/4"-28 1/4"-28 (12)
5/16"-18 5/16"-18 (16)
5/16"-24 5/16"-24 (12)
3/8"-16 (20)

3/8"-24 (13)

7/16"-14 (10)

7/16"-20 (11)

1/2"-13 (13)

1/2"-20 (13)

9/16"-12 (6)

9/16"-18 (7)

5/8"-11 (11)

5/8"-18 (9)

11/16"-11 (1)

3/4"-10 (11)

3/4"-16 (12)

7/8"-14 (6)

7/8"-9 (8)

1"-12 (5)

1"-14 (6)

1"-64 (3)

1"-72 (2)

1"-8 (8)

1 1/8"-12 (6)

1 1/8"-7 (6)

1 1/8"-8 (2)

1 1/4"-12 (6)

1 1/4"-7 (6)

1 1/4"-8 (3)

1 3/8"-12 (3)

1 3/8"-6 (3)

1 1/2"-12 (5)

1 1/2"-6 (6)

1 1/2"-8 (2)

M2x0.40 (2)

M3x0.50 (3)

M4x0.70 (2)

M5x0.80 (5)

M6x1.00 (4)

M7x1.00 (1)

M8x1.25 (5)

M10x1.50 (6)

M12x1.75 (6)

M14x1.25 (2)

M14x2.00 (4)

M16x2.00 (4)

M18x1.50 (2)

M18x2.50 (4)

M20x2.50 (4)

M22x2.50 (1)

M24x3.00 (4)

M30x3.50 (3)

M36x4.00 (5)

M2.5x0.45 (1)

M3.5x0.60 (1)

M4.5x0.75 (1)

#0-80 (3)

#2-56 (3)

#2-64 (2)

#3-48 (4)

#3-56 (3)

#4-40 (11)

#4-48 (3)

#5-40 (7)

#5-44 (3)

#6-32 (18)

#6-40 (4)

#8-32 (17)

#8-36 (4)

#10-24 (15)

#10-32 (20)

#12-24 (7)

#12-28 (3)
View more View less

Thread Standard

Metric Metric (2)
Metric Coarse Metric Coarse (66)
Metric Fine Metric Fine (2)
NPT NPT (2)
UNC UNC (92)
UNC, UNF UNC, UNF (13)
UNC, UNJC (131)

UNF (60)

UNF, UNJF (109)

UNS (3)
View more View less

Tap Chamfer

Bottoming Bottoming (167)
Plug Plug (192)
Taper Taper (121)

Tap Material

High Speed Steel High Speed Steel (403)
Vanadium High Speed Steel Vanadium High Speed Steel (77)

Tap Finish

Black Oxide Black Oxide (38)
Bright (Uncoated) Bright (Uncoated) (398)
TiCN TiCN (4)
TiN TiN (40)

Thread Length

5/16 in 5/16 in (3)
3/8 in 3/8 in (5)
7/16 in 7/16 in (5)
0.5 in 0.5 in (7)
1/2 in 1/2 in (2)
9/16 in 9/16 in (13)
5/8 in (10)

43/64 in (1)

11/16 in (22)

3/4 in (22)

7/8 in (37)

15/16 in (10)

1 in (29)

1 1/16 in (1)

1 1/8 in (27)

1 1/4 in (36)

1 7/16 in (21)

1 21/32 in (39)

1 13/16 in (17)

2 in (23)

2 7/32 in (14)

2 1/2 in (3)

2.5 in (16)

2 9/16 in (29)

3 in (19)

11.00 mm (2)

15.00 mm (3)

17.00 mm (1)

19.05 mm (2)

22.00 mm (2)

22.22 mm (4)

25.00 mm (2)

25.40 mm (2)

27.00 mm (2)

29.00 mm (5)

32.00 mm (6)

34.00 mm (1)

42.00 mm (10)

42.07 mm (2)

46.00 mm (7)

46.04 mm (1)

51.00 mm (4)

56.00 mm (4)

56.35 mm (1)

65.00 mm (2)

65.09 mm (2)

76.00 mm (3)

76.20 mm (1)
View more View less

Overall Length

1 5/8 in 1 5/8 in (3)
1 11/16 in 1 11/16 in (2)
1.69 in 1.69 in (3)
1 3/4 in 1 3/4 in (5)
1.75 in 1.75 in (1)
1.81 in 1.81 in (4)
1 13/16 in (4)

1 7/8 in (8)

1.88 in (3)

1 15/16 in (6)

1.94 in (6)

2 in (40)

2 1/8 in (13)

2.13 in (7)

2 3/8 in (24)

2.38 in (13)

2 1/2 in (19)

2.5 in (5)

2 28/39 in (1)

2 23/32 in (20)

2.72 in (3)

2 15/16 in (25)

2.94 in (4)

3 in (33)

3 5/32 in (15)

3 3/8 in (20)

3.38 in (3)

3.59 in (5)

3 19/32 in (7)

3.81 in (4)

3 13/16 in (14)

4 in (15)

4.03 in (2)

4 2/64 in (1)

4 1/4 in (17)

4.47 in (3)

4 11/16 in (9)

4.91 in (3)

5 in (19)

5 1/8 in (11)

5 7/16 in (8)

5.44 in (3)

5 3/4 in (6)

6 in (20)

6.06 in (9)

6 3/8 in (9)

44.00 mm (1)

60.00 mm (2)

60.32 mm (1)

63.50 mm (1)

64.00 mm (1)

69.00 mm (1)

69.05 mm (2)

74 mm (1)

74.00 mm (1)

74.61 mm (1)

85.72 mm (1)

86 mm (1)

91.28 mm (1)

102 mm (1)

102.00 mm (2)

102.39 mm (1)

110.00 mm (1)

115.00 mm (1)

119.00 mm (1)

124.62 mm (1)

138.11 mm (1)

152.00 mm (1)
View more View less

75% Thread Drill Size

#7 #7 (17)
#21 #21 (20)
#25 #25 (16)
#29 #29 (4)
#33 #33 (4)
#36 #36 (18)
#39 (7)

#46 (4)

#53 (2)

5/16 in (20)

27/64 in (13)

53/64 in (4)

0.9858 in (6)

1.0032 in (2)

1.0438 in (6)

1.1108 in (6)

1.1282 in (3)

1.1688 in (6)

1.2126 in (3)

1.2938 in (3)

1.3376 in (6)

1.3782 in (2)

1.4188 in (5)

1.20 mm (3)

1.45 mm (3)

1.60 mm (2)

1.73 mm (3)

1.80 mm (2)

2.00 mm (4)

2.20 mm (11)

2.32 mm (3)

2.50 mm (3)

2.60 mm (3)

2.90 mm (1)

3.24 mm (2)

3.30 mm (2)

3.40 mm (17)

4.20 mm (5)

4.45 mm (7)

4.60 mm (3)

5.00 mm (4)

5.45 mm (12)

6.00 mm (1)

8.50 mm (19)

9.95 mm (11)

10.30 mm (6)

11.40 mm (13)

12.00 mm (4)

12.20 mm (6)

12.90 mm (7)

13.60 mm (11)

14.00 mm (4)

14.50 mm (9)

15.50 mm (4)

16.50 mm (13)

17.50 mm (16)

19.50 mm (9)

20.40 mm (6)

22.25 mm (8)

23.30 mm (5)

26.59 mm (2)

31.67 mm (2)

32.10 mm (2)

F (16)

H (5)

I (12)

Q (1)

U (10)
View more View less

Thread Limit

H1 H1 (17)
H2 H2 (58)
D3 D3 (6)
H3 H3 (179)
D4 D4 (9)
H4 H4 (47)
D5 (6)

H5 (5)

D6 (7)

H6 (15)

D7 (11)

H7 (1)

D8 (3)

D9 (6)

2B (110)
View more View less

Class of Fit

2B 2B (110)
3B 3B (4)
2B, 3B 2B, 3B (69)
6H 6H (30)

Thread Direction

Left Hand Left Hand (38)
Right Hand Right Hand (442)

Number of Flutes

2 2 (14)
3 3 (62)
4 4 (388)
6 6 (16)

High-Speed Steel Straight-Flute Hand Taps

High-speed steel taps provide good wear resistance in general purpose tapping applications in a range of materials. Also called hand taps, high-speed steel straight-flute taps are turned with a tap wrench to create or repair internal threads in blind holes and through holes. As the taps are rotated into a hole to create threads, the chips move into the flutes but are not evacuated.

https://catalogue.grainger.ca/?hybris=true

480 Results Found

In stock at branch(0)

Branch #

Change

Find a Branch

Sort results by:

Grid List

Results per page : 16 | 32 | 48

WIDIA GTD
STRAIGHT FLUTE TAP, 5/16"-24 THREAD, 1⅛ IN THREAD L, 2 23/32 IN LENGTH, PLUG
Item # WID5303-14127
Mfr. Model # 5303-14127

EHC: EHC :

This hand tap is made of high speed steel and has a 0.318 inch diameter, 1.5900 inch long shank. It is for use with steel, and meets the standards for USCTI Table 302, ANSI. This 5305L/5303L series hand tap has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through, has left hand direction with a 2-23/32 inch length. Plus it has four flutes and a straight shank.

This hand tap is made of high speed steel and has a 0.318 inch diameter, 1.5900 inch long shank. It is for use with steel, and meets the standards for USCTI Table 302, ANSI. This 5305L/5303L series hand tap has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through, has left hand direction with a 2-23/32 inch length. Plus it has four flutes and a straight shank.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $17.61 / EACH

EHC: EHC :

Qty:

Compare

WIDIA GTD
STRAIGHT FLUTE TAP, ½"-20 THREAD, 1 21/32 IN THREAD L, 3⅜ IN LENGTH, PLUG
Item # WID5303-14313
Mfr. Model # 5303-14313

EHC: EHC :

This hand tap is made of high speed steel and has a 0.367 inch diameter, 1.7200 inch long shank. It is for use with steel, and meets the standards for USCTI Table 302, ANSI. This 5305L/5303L series hand tap has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through, has left hand direction with a 3⅜ inch length. Plus it has four flutes and a straight shank.

This hand tap is made of high speed steel and has a 0.367 inch diameter, 1.7200 inch long shank. It is for use with steel, and meets the standards for USCTI Table 302, ANSI. This 5305L/5303L series hand tap has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through, has left hand direction with a 3⅜ inch length. Plus it has four flutes and a straight shank.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $39.28 / EACH

EHC: EHC :

Qty:

Compare

WIDIA GTD
STRAIGHT FLUTE TAP, ⅝"-18 THREAD, 1 13/16 IN THREAD L, 3 13/16 IN LENGTH, 2 IN
Item # WID5303-14408
Mfr. Model # 5303-14408

EHC: EHC :

This hand tap is made of high speed steel and has a 0.480 inch diameter, 2 inch long shank. It is for use with steel, and meets the standards for USCTI Table 302, ANSI. This 5305L/5303L series hand tap has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through, has left hand direction with a 3-13/16 inch length. Plus it has four flutes and a straight shank.

This hand tap is made of high speed steel and has a 0.480 inch diameter, 2 inch long shank. It is for use with steel, and meets the standards for USCTI Table 302, ANSI. This 5305L/5303L series hand tap has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through, has left hand direction with a 3-13/16 inch length. Plus it has four flutes and a straight shank.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $73.47 / EACH

EHC: EHC :

Qty:

Compare

WIDIA GTD
STRAIGHT FLUTE TAP, ⅝"-11 THREAD, 1 13/16 IN THREAD L, 3 13/16 IN LENGTH, 2 IN
Item # WID5305S2746562
Mfr. Model # 5305S2746562

EHC: EHC :

This straight flute tap is made of high speed steel and has a 0.480 inch diameter, 2 inch long shank. It is for use with steel, and meets ANSI standards 302. This 5303/2303 series straight flute tap has a black oxide finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 3 13/16 inch length. Plus it has four flutes and a straight shank.

This straight flute tap is made of high speed steel and has a 0.480 inch diameter, 2 inch long shank. It is for use with steel, and meets ANSI standards 302. This 5303/2303 series straight flute tap has a black oxide finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 3 13/16 inch length. Plus it has four flutes and a straight shank.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # 1296

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $65.07 / EACH

EHC: EHC :

Qty:

Compare

WIDIA GTD
STRAIGHT FLUTE TAP, ¼"-28 THREAD, 1 IN THREAD L, 2½ IN LENGTH, BOTTOMING
Item # WID5305S2746691
Mfr. Model # 5305S2746691

EHC: EHC :

This straight flute tap is made of high speed steel and has a 0.255 inch diameter, 1½ inch long shank. It is for use with steel, and meets ANSI standards 302. This 5303/2303 series straight flute tap has a black oxide finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2½ inch length. Plus it has four flutes and a straight shank.

This straight flute tap is made of high speed steel and has a 0.255 inch diameter, 1½ inch long shank. It is for use with steel, and meets ANSI standards 302. This 5303/2303 series straight flute tap has a black oxide finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2½ inch length. Plus it has four flutes and a straight shank.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $13.07 / EACH

EHC: EHC :

Qty:

Compare

WIDIA GTD
STRAIGHT FLUTE TAP, ¼"-20 THREAD, 1 IN THREAD L, 2½ IN LENGTH, BOTTOMING
Item # WID2303-19251
Mfr. Model # 2303-19251

EHC: EHC :

This hand tap is made of vanadium high speed steel and has a 0.255 inch diameter, 1½ inch long shank. It is designed for use with steel, and meets the standards for ANSI 302. This 5303/2303 series hand tap has a TiN finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2½ inch length. Plus it has four flutes and a straight shank.

This hand tap is made of vanadium high speed steel and has a 0.255 inch diameter, 1½ inch long shank. It is designed for use with steel, and meets the standards for ANSI 302. This 5303/2303 series hand tap has a TiN finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2½ inch length. Plus it has four flutes and a straight shank.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $16.65 / EACH

EHC: EHC :

Qty:

Compare

STRAIGHT FLUTE TAP, #4-40 THREAD, 9/16 IN THREAD L, 1⅞ IN LENGTH, PLUG, PIPE

WIDIA GTD
STRAIGHT FLUTE TAP, #4-40 THREAD, 9/16 IN THREAD L, 1⅞ IN LENGTH, PLUG, PIPE
Item # WID2305-19211
Mfr. Model # 2305-19211

EHC: EHC :

This hand tap is made of vanadium high speed steel and has a 0.141 inch diameter, 1-5/16 inch long shank. It is designed for use with steel, and meets the standards for ANSI. This 5305/2305 series hand tap has a TiN finish, and has pipe measurements. It is non-coolant through, has right hand direction with a 1⅞ inch length. Plus it has three flutes and a straight shank.

This hand tap is made of vanadium high speed steel and has a 0.141 inch diameter, 1-5/16 inch long shank. It is designed for use with steel, and meets the standards for ANSI. This 5305/2305 series hand tap has a TiN finish, and has pipe measurements. It is non-coolant through, has right hand direction with a 1⅞ inch length. Plus it has three flutes and a straight shank.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $23.45 / EACH

EHC: EHC :

Qty:

Compare

STRAIGHT FLUTE TAP, #5-40 THREAD, ⅝ IN THREAD L, 1 15/16 IN LENGTH, PLUG, PIPE

WIDIA GTD
STRAIGHT FLUTE TAP, #5-40 THREAD, ⅝ IN THREAD L, 1 15/16 IN LENGTH, PLUG, PIPE
Item # WID2305-19216
Mfr. Model # 2305-19216

EHC: EHC :

This hand tap is made of vanadium high speed steel and has a 0.141 inch diameter, 1-5/16 inch long shank. It is designed for use with steel, and meets the standards for ANSI. This 5305/2305 series hand tap has a TiN finish, and has pipe measurements. It is non-coolant through, has right hand direction with a 1-15/16 inch length. Plus it has three flutes and a straight shank.

This hand tap is made of vanadium high speed steel and has a 0.141 inch diameter, 1-5/16 inch long shank. It is designed for use with steel, and meets the standards for ANSI. This 5305/2305 series hand tap has a TiN finish, and has pipe measurements. It is non-coolant through, has right hand direction with a 1-15/16 inch length. Plus it has three flutes and a straight shank.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $23.45 / EACH

EHC: EHC :

Qty:

Compare

WIDIA GTD
STRAIGHT FLUTE TAP, ¾"-10 THREAD, 2 IN THREAD L, 4¼ IN LENGTH, PLUG, STEEL
Item # WID5305S2746560
Mfr. Model # 5305S2746560

EHC: EHC :

This straight flute tap is made of high speed steel and has a 0.590 inch diameter, 2 inch long shank. It is for use with steel, and meets ANSI standards 302. This 5303/2303 series straight flute tap has a black oxide finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 4¼ inch length. Plus it has four flutes and a straight shank.

This straight flute tap is made of high speed steel and has a 0.590 inch diameter, 2 inch long shank. It is for use with steel, and meets ANSI standards 302. This 5303/2303 series straight flute tap has a black oxide finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 4¼ inch length. Plus it has four flutes and a straight shank.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $92.14 / EACH

EHC: EHC :

Qty:

Compare

WIDIA GTD
STRAIGHT FLUTE TAP, ⅜"-16 THREAD, 1¼ IN THREAD L, 2 15/16 IN LENGTH, STEEL
Item # WID5305S2746609
Mfr. Model # 5305S2746609

EHC: EHC :

This straight flute tap is made of high speed steel and has a 0.381 inch diameter, 1.6900 inch long shank. It is for use with steel, and meets ANSI standards 302. This 5303/2303 series straight flute tap has a black oxide finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2 15/16 inch length. Plus it has four flutes and a straight shank.

This straight flute tap is made of high speed steel and has a 0.381 inch diameter, 1.6900 inch long shank. It is for use with steel, and meets ANSI standards 302. This 5303/2303 series straight flute tap has a black oxide finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2 15/16 inch length. Plus it has four flutes and a straight shank.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # 1296

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $17.75 / EACH

EHC: EHC :

Qty:

Compare

STRAIGHT FLUTE TAP, #8-32 THREAD, ¾ IN THREAD L, 2⅛ IN LENGTH, BOTTOMING

WIDIA GTD
STRAIGHT FLUTE TAP, #8-32 THREAD, ¾ IN THREAD L, 2⅛ IN LENGTH, BOTTOMING
Item # WID5305S2863495
Mfr. Model # 5305S2863495

EHC: EHC :

This straight flute tap is made of high speed steel and has a 0.168 inch diameter, 1.3800 inch long shank. It is designed for use with steel, and meets ANSI standards 302. This 5305/2305 series straight flute tap has a black oxide finish, and has pipe measurements. It is non-coolant through, has right hand direction with a 2⅛ inch length. Plus it has four flutes and a straight shank.

This straight flute tap is made of high speed steel and has a 0.168 inch diameter, 1.3800 inch long shank. It is designed for use with steel, and meets ANSI standards 302. This 5305/2305 series straight flute tap has a black oxide finish, and has pipe measurements. It is non-coolant through, has right hand direction with a 2⅛ inch length. Plus it has four flutes and a straight shank.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $11.83 / EACH

EHC: EHC :

Qty:

Compare

STRAIGHT FLUTE TAP, M5X0.8 THREAD, 22.23MM THREAD L, 60.33MM OVERALL L, PLUG

WIDIA GTD
STRAIGHT FLUTE TAP, M5X0.8 THREAD, 22.23MM THREAD L, 60.33MM OVERALL L, PLUG
Item # WID2353-19906
Mfr. Model # 2353-19906

EHC: EHC :

This hand tap is made of high speed steel and has a 4.93mm diameter, 1½ inch long shank. It is designed for use with steel, and meets the standards for USCTI, ANSI. This 5353 series hand tap has a TiN finish, and has metric measurements. It is non-coolant through, has right hand direction with a 60.32mm length. Plus it has four flutes and a straight shank.

This hand tap is made of high speed steel and has a 4.93mm diameter, 1½ inch long shank. It is designed for use with steel, and meets the standards for USCTI, ANSI. This 5353 series hand tap has a TiN finish, and has metric measurements. It is non-coolant through, has right hand direction with a 60.32mm length. Plus it has four flutes and a straight shank.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $21.10 / EACH

EHC: EHC :

Qty:

Compare

WIDIA GTD
STRAIGHT FLUTE TAP, 5/16"-18 THREAD, 1⅛ IN THREAD L, 2 23/32 IN LENGTH, ANSI
Item # WID7303-11606
Mfr. Model # 7303-11606

EHC: EHC :

Maintenance taps are ground thread taps made from high speed steel. For use by hand or for tapping under power. Chamfer-bottoming. (1-2 pitches)

Maintenance taps are ground thread taps made from high speed steel. For use by hand or for tapping under power. Chamfer-bottoming. (1-2 pitches)

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # 1297

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $13.88 / EACH

EHC: EHC :

Qty:

Compare

WIDIA GTD
STRAIGHT FLUTE TAP, 5/16"-24 THREAD, 1⅛ IN THREAD L, 2 23/32 IN LENGTH, TAPER
Item # WID7303-11608
Mfr. Model # 7303-11608

EHC: EHC :

Maintenance taps are ground thread taps made from high speed steel. For use by hand or for tapping under power. Chamfer-taper. (7-10 pitches)

Maintenance taps are ground thread taps made from high speed steel. For use by hand or for tapping under power. Chamfer-taper. (7-10 pitches)

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # 1297

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $13.88 / EACH

EHC: EHC :

Qty:

Compare

WIDIA GTD
STRAIGHT FLUTE TAP, ¾"-16 THREAD, 2 IN THREAD L, 4¼ IN LENGTH, PLUG, 2 IN
Item # WID7303-11657
Mfr. Model # 7303-11657

EHC: EHC :

Maintenance taps are ground thread taps made from high speed steel. For use by hand or for tapping under power. Chamfer-plug. (3-5 pitches)

Maintenance taps are ground thread taps made from high speed steel. For use by hand or for tapping under power. Chamfer-plug. (3-5 pitches)

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # 1297

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $75.90 / EACH

EHC: EHC :

Qty:

Compare

WIDIA GTD
STRAIGHT FLUTE TAP, ⅞"-14 THREAD, 2 7/32 IN THREAD L, 4 11/16 IN LENGTH, ANSI
Item # WID7303-11666
Mfr. Model # 7303-11666

EHC: EHC :

Maintenance taps are ground thread taps made from high speed steel. For use by hand or for tapping under power. Chamfer-bottoming. (1-2 pitches)

Maintenance taps are ground thread taps made from high speed steel. For use by hand or for tapping under power. Chamfer-bottoming. (1-2 pitches)

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # 1297

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $101.96 / EACH

EHC: EHC :

Qty:

Compare

Grid List

Results per page : 16 | 32 | 48

Availability

Pick Up

Shipping

To view Availability, please select a Branch

To view Availability for another location, please enter postal code below Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.

Select a Branch

Selected Branch

(View on Map)

Apply

Enter the city, province, postal code or branch number.

Cancel

Please select pick up location

No Result Found.

Selected Branch

,
,

Phone :
Fax :
Hours :

No Result Found.

New Postal Code

Postal Code should be in LNLNLN format e.g. L3T7W8

Add to Order List

Your items were added

Your items were added to some lists

Max quantity exceeded. The item could not be added to the following List(s)

No Existing List Found. Please Create New List below.

Your list has been created

Please select a list

Add to an existing list

My List

No Existing 'My List' Found. Please Create New 'My List' first.

No Results Found

Select one or multiple lists

Create a new list

List Name

My List

You have #compareProducts out of 5 products to compare selected.

Clear All

Add Item

Hide

Show

Filter Results By

Applied Filters

Clear All

Search within these results

High-Speed Steel Straight-Flute Hand Taps

480 Results Found

Add to Order List

Company Information

Resources

Services

Ordering

Customer Support

Item #	Qty

Filter Results By

Applied Filters Clear All

Search within these results

High-Speed Steel Straight-Flute Hand Taps

480 Results Found

Add to Order List

Company Information

Resources

Services

Ordering

Customer Support

Applied Filters

Clear All