Product ITEM is unavailable. See products from the same category below.
Tarauds à entrée hélicoïdale à haute performance pour le nickel et le titane
Ces tarauds à pointe hélicoïdale haute performance offrent une plus grande précision et une meilleure exactitude que les tarauds à pointe hélicoïdale à usage général lorsqu’ils sont utilisés pour fileter des trous dans le nickel ou le titane. Les tarauds à pointes hélicoïdales haute performance sont plus durs et plus résistants à l’usure que les tarauds à pointes hélicoïdales à usage général. Les tarauds ont des goujures droites avec une pointe hélicoïdale qui pousse les copeaux devant le taraud lorsqu’il se déplace dans un trou et sort de l’autre côté, forçant ainsi les copeaux en dehors du trou. Ils créent des filetages internes dans les trous débouchants et s’installent dans un porte-outils sur une machine telle qu’un tour ou une machine à commande numérique.
This straight flute tap is made of high speed steel and has a 0.141 inch diameter, 1 9/32 inch long shank. It is designed for use with aluminum, brass, bronze, copper, and meets ANSI standards. This 7301 series straight flute tap is uncoated, and has pipe measurements. It is non-coolant through, has right hand direction with a two-inch length. Plus it has two flutes and a straight shank.
This straight flute tap is made of high speed steel and has a 0.141 inch diameter, 1 9/32 inch long shank. It is designed for use with aluminum, brass, bronze, copper, and meets ANSI standards. This 7301 series straight flute tap is uncoated, and has pipe measurements. It is non-coolant through, has right hand direction with a two-inch length. Plus it has two flutes and a straight shank.
Ce taraud à cannelure droite est en acier rapide et a une tige de 0,480 po de diamètre/2 po de long. Pour l'aluminium, le laiton, le bronze, le cuivre: répond aux normes ANSI. Ce taraud à cannelure droite de la série 7301 est sans revêtement et a des mesures fractionnaires en po. Il est sans canal de refroidissement, a une direction à droite et est 3 13/16 po de long. De plus, il a 3 cannelures/tige droite.
Ce taraud à cannelure droite est en acier rapide et a une tige de 0,480 po de diamètre/2 po de long. Pour l'aluminium, le laiton, le bronze, le cuivre: répond aux normes ANSI. Ce taraud à cannelure droite de la série 7301 est sans revêtement et a des mesures fractionnaires en po. Il est sans canal de refroidissement, a une direction à droite et est 3 13/16 po de long. De plus, il a 3 cannelures/tige droite.
Ce taraud à cannelure droite est en acier rapide et a une tige de 0,323 po de diamètre/1 23/32 po de long. Pour l'aluminium, le laiton, le bronze, le cuivre: répond aux normes ANSI. Ce taraud à cannelure droite de la série 7301 est sans revêtement et a des mesures fractionnaires en po. Il est sans canal de refroidissement, a une direction à droite et une longueur de 3 5/32 po. De plus, il a 3 cannelures/tige droite.
Ce taraud à cannelure droite est en acier rapide et a une tige de 0,323 po de diamètre/1 23/32 po de long. Pour l'aluminium, le laiton, le bronze, le cuivre: répond aux normes ANSI. Ce taraud à cannelure droite de la série 7301 est sans revêtement et a des mesures fractionnaires en po. Il est sans canal de refroidissement, a une direction à droite et une longueur de 3 5/32 po. De plus, il a 3 cannelures/tige droite.
Ce taraud à pistolet est en acier rapide et a une tige de 0,323 po de diamètre/1 23/32 po de long. Pour l'aluminium, le laiton, le bronze, le cuivre: répond aux normes ANSI. Ce taraud à pistolet de la série 7301 est sans revêtement et a des mesures fractionnaires en po. Il est sans canal de refroidissement, a une direction à droite et une longueur de 3,16 po. De plus, il a 3 cannelures/tige droite.
Ce taraud à pistolet est en acier rapide et a une tige de 0,323 po de diamètre/1 23/32 po de long. Pour l'aluminium, le laiton, le bronze, le cuivre: répond aux normes ANSI. Ce taraud à pistolet de la série 7301 est sans revêtement et a des mesures fractionnaires en po. Il est sans canal de refroidissement, a une direction à droite et une longueur de 3,16 po. De plus, il a 3 cannelures/tige droite.
Maintenance gun tap. High speed steel, ground thread, plug chamfer (3-5 pitches). For use by hand or for tapping under power. They are recommended for use in through holes or blind holes which allow for chip accumulation.
Maintenance gun tap. High speed steel, ground thread, plug chamfer (3-5 pitches). For use by hand or for tapping under power. They are recommended for use in through holes or blind holes which allow for chip accumulation.
This straight flute tap is made of high speed steel and has a 0.141 inch diameter, 1 5/16 inch long shank. It is designed for use with aluminum, brass, bronze, copper, and meets ANSI standards. This 7301 series straight flute tap is uncoated, and has pipe measurements. It is non-coolant through, has right hand direction with a 1⅞ inch length. Plus it has two flutes and a straight shank.
This straight flute tap is made of high speed steel and has a 0.141 inch diameter, 1 5/16 inch long shank. It is designed for use with aluminum, brass, bronze, copper, and meets ANSI standards. This 7301 series straight flute tap is uncoated, and has pipe measurements. It is non-coolant through, has right hand direction with a 1⅞ inch length. Plus it has two flutes and a straight shank.
This straight flute tap is made of high speed steel and has a 0.367 inch diameter, 1 23/32 inch long shank. It is for use with aluminum, brass, bronze, copper, and meets ANSI standards. This 7301 series straight flute tap is uncoated, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 3⅜ inch length. Plus it has three flutes and a straight shank.
This straight flute tap is made of high speed steel and has a 0.367 inch diameter, 1 23/32 inch long shank. It is for use with aluminum, brass, bronze, copper, and meets ANSI standards. This 7301 series straight flute tap is uncoated, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 3⅜ inch length. Plus it has three flutes and a straight shank.
This gun tap is made of high speed steel and has a 0.194 inch diameter, 1½ inch long shank. It is designed for use with aluminum, brass, bronze, copper, and meets the standards for ANSI. This 7301 series gun tap is uncoated, and has pipe measurements. It is non-coolant through, has right hand direction with a 2.38 inch length. Plus it has two flutes and a straight shank.
This gun tap is made of high speed steel and has a 0.194 inch diameter, 1½ inch long shank. It is designed for use with aluminum, brass, bronze, copper, and meets the standards for ANSI. This 7301 series gun tap is uncoated, and has pipe measurements. It is non-coolant through, has right hand direction with a 2.38 inch length. Plus it has two flutes and a straight shank.
Maintenance gun tap. High speed steel, ground thread, plug chamfer (3-5 pitches). For use by hand or for tapping under power. They are recommended for use in through holes or blind holes which allow for chip accumulation.
Maintenance gun tap. High speed steel, ground thread, plug chamfer (3-5 pitches). For use by hand or for tapping under power. They are recommended for use in through holes or blind holes which allow for chip accumulation.
This straight flute tap is made of high speed steel and has a 0.318 inch diameter, 1 9/16 inch long shank. It is for use with aluminum, brass, bronze, copper, and meets ANSI standards. This 7301 series straight flute tap is uncoated, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2 23/32 inch length. Plus it has two flutes and a straight shank.
This straight flute tap is made of high speed steel and has a 0.318 inch diameter, 1 9/16 inch long shank. It is for use with aluminum, brass, bronze, copper, and meets ANSI standards. This 7301 series straight flute tap is uncoated, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2 23/32 inch length. Plus it has two flutes and a straight shank.
This tap is made of high speed steel and has a 0.381 inch diameter, 1 11/16 inch long shank. It is designed for use with aluminum, brass, bronze, copper, and meets the standards for ANSI. This 7301 series tap is uncoated, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2-15/16 inch length. Plus it has three flutes and a straight shank.
This tap is made of high speed steel and has a 0.381 inch diameter, 1 11/16 inch long shank. It is designed for use with aluminum, brass, bronze, copper, and meets the standards for ANSI. This 7301 series tap is uncoated, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2-15/16 inch length. Plus it has three flutes and a straight shank.
Maintenance gun tap. High speed steel, ground thread, plug chamfer (3-5 pitches). For use by hand or for tapping under power. They are recommended for use in through holes or blind holes which allow for chip accumulation.
Maintenance gun tap. High speed steel, ground thread, plug chamfer (3-5 pitches). For use by hand or for tapping under power. They are recommended for use in through holes or blind holes which allow for chip accumulation.
Maintenance gun tap. High speed steel, ground thread, plug chamfer (3-5 pitches). For use by hand or for tapping under power. They are recommended for use in through holes or blind holes which allow for chip accumulation.
Maintenance gun tap. High speed steel, ground thread, plug chamfer (3-5 pitches). For use by hand or for tapping under power. They are recommended for use in through holes or blind holes which allow for chip accumulation.
Maintenance gun tap. High speed steel, ground thread, plug chamfer (3-5 pitches). For use by hand or for tapping under power. They are recommended for use in through holes or blind holes which allow for chip accumulation.
Maintenance gun tap. High speed steel, ground thread, plug chamfer (3-5 pitches). For use by hand or for tapping under power. They are recommended for use in through holes or blind holes which allow for chip accumulation.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
