Product ITEM is unavailable. See products from the same category below.
End Brushes
End brushes are used for fine-tuned deburring and cleaning, removing slag and rust from narrow passages, tubes, and tight corners. Brush type, bristle type, and bristle material combine to determine the best-suited application and workpiece material.
Miniature wire end brush with steel filament measuring 0.005 inches. Brush diameter is 1/4 of an inch with a 1/4-inch shank, and the maximum operating speed is 25,000 RPM.
Miniature wire end brush with steel filament measuring 0.005 inches. Brush diameter is 1/4 of an inch with a 1/4-inch shank, and the maximum operating speed is 25,000 RPM.
Miniature wire end brush with steel filament measuring 0.003 inches. Brush diameter is 3/16 of an-inch with a 1/4-inch shank, and the maximum operating speed is 25,000 RPM.
Miniature wire end brush with steel filament measuring 0.003 inches. Brush diameter is 3/16 of an-inch with a 1/4-inch shank, and the maximum operating speed is 25,000 RPM.
Miniature wire end brush with brass filament measuring 0.003 inches. Brush diameter is 3/16 of an inch with a 1/4-inch shank, and the maximum operating speed is 25,000 RPM.
Miniature wire end brush with brass filament measuring 0.003 inches. Brush diameter is 3/16 of an inch with a 1/4-inch shank, and the maximum operating speed is 25,000 RPM.
Crimped wire end brush, circular, made of stainless steel, has a 1 1/2-inch diameter and a 1/4-inch shank. The filaments measure 0.005 inches and the brush has a 15,000 maximum RPM.
Crimped wire end brush, circular, made of stainless steel, has a 1 1/2-inch diameter and a 1/4-inch shank. The filaments measure 0.005 inches and the brush has a 15,000 maximum RPM.
A circular, steel end brush made of crimped wire, flared to cover wide areas and irregular surfaces, with a 1/4 inch shank for mounting on power tools. Operating at maximum 15,000 RPM, the brush measures 1 x 1 1/4 inches, and has a 0.006 inch filament diameter.
A circular, steel end brush made of crimped wire, flared to cover wide areas and irregular surfaces, with a 1/4 inch shank for mounting on power tools. Operating at maximum 15,000 RPM, the brush measures 1 x 1 1/4 inches, and has a 0.006 inch filament diameter.
Crimped wire end brush, circular, made of stainless steel, has a two-inch diameter and a 1/4-inch shank. The filaments measure 0.01 inches and the brush has a 15,000 maximum RPM.
Crimped wire end brush, circular, made of stainless steel, has a two-inch diameter and a 1/4-inch shank. The filaments measure 0.01 inches and the brush has a 15,000 maximum RPM.
The crimped wire end brush, with a steel wire filament diameter of 0.006 inches, comes with a 1/4 inch shank for mounting on power tools. Featuring an elastomer layer on the cup to prevent scratching and marring of surfaces, the Scuf-Gard brush operates at 25,000 max RPM, and measures 2 3/4 x 1/2 inches.
The crimped wire end brush, with a steel wire filament diameter of 0.006 inches, comes with a 1/4 inch shank for mounting on power tools. Featuring an elastomer layer on the cup to prevent scratching and marring of surfaces, the Scuf-Gard brush operates at 25,000 max RPM, and measures 2 3/4 x 1/2 inches.
Crimped wire stainless coated cup end brush provides protection against scratching and marring adjacent work surfaces. Brush diameter 1/2 inch, wire size 0.005 inches, trim length 1 inch and 20,000 MSFS RPM.
Crimped wire stainless coated cup end brush provides protection against scratching and marring adjacent work surfaces. Brush diameter 1/2 inch, wire size 0.005 inches, trim length 1 inch and 20,000 MSFS RPM.
Carbon crimped wire end brush with 1/4 inch shank is specially suited for use on portable air and electric tools, CNC machines, and robotic equipment. Designed to work where space limitations is a factor.
Carbon crimped wire end brush with 1/4 inch shank is specially suited for use on portable air and electric tools, CNC machines, and robotic equipment. Designed to work where space limitations is a factor.
Stainless crimped wire end brush with 1/4 inch shank is specially suited for use on portable air and electric tools, CNC machines, and robotic equipment. Designed to work where space limitations is a factor.
Stainless crimped wire end brush with 1/4 inch shank is specially suited for use on portable air and electric tools, CNC machines, and robotic equipment. Designed to work where space limitations is a factor.
Knotted wire end brush, steel, with twisted wire strands for the filament, one-inch diameter, and 1/4-inch shank. The twisted filament wires are 0.014 inches, and the brush has a 20,000 maximum RPM.
Knotted wire end brush, steel, with twisted wire strands for the filament, one-inch diameter, and 1/4-inch shank. The twisted filament wires are 0.014 inches, and the brush has a 20,000 maximum RPM.
Stainless crimped wire end brush with 1/4 inch shank is specially suited for use on portable air and electric tools, CNC machines, and robotic equipment. Designed to work where space limitations is a factor.
Stainless crimped wire end brush with 1/4 inch shank is specially suited for use on portable air and electric tools, CNC machines, and robotic equipment. Designed to work where space limitations is a factor.
Carbon crimped wire end brush with 1/4 inch shank is specially suited for use on portable air and electric tools, CNC machines, and robotic equipment. Designed to work where space limitations is a factor.
Carbon crimped wire end brush with 1/4 inch shank is specially suited for use on portable air and electric tools, CNC machines, and robotic equipment. Designed to work where space limitations is a factor.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
