Product ITEM is unavailable. See products from the same category below.
Constant-Level & Drip-Feed Oilers
Constant-level and drip-feed oilers ensure moving parts have a steady feed of lubrication as oil levels deplete over time due to displacement, misting, and evaporation. They mount permanently onto industrial machinery to lubricate gears, bearings, chains, and maintain oil levels in reservoirs such as gearboxes and bearing housings. Constant-level and drip feed oilers reduce maintenance needs by limiting frequent lubricant level checks and refilling of oil in equipment.
This heavy-duty pump oiler has a one-pint capacity. It has a heavy-gauge steel body and a zinc die-cast, high-pressure pump with a precision-machined piston. The pump oiler has a 7 1/2-inch angle spout. The thumb lever generates a drop or stream of oil and stays primed for instant use. It has a large threaded screw cap on top of the chamber for refuelling. This pump oiler has a powder-coated copper bronze finish. This product includes a replaceable spout.
This heavy-duty pump oiler has a one-pint capacity. It has a heavy-gauge steel body and a zinc die-cast, high-pressure pump with a precision-machined piston. The pump oiler has a 7 1/2-inch angle spout. The thumb lever generates a drop or stream of oil and stays primed for instant use. It has a large threaded screw cap on top of the chamber for refuelling. This pump oiler has a powder-coated copper bronze finish. This product includes a replaceable spout.
This heavy-duty pump oiler has a 32-ounce or one-quart capacity. It has a heavy-gauge steel body and a zinc die-cast, high-pressure pump with a precision-machined piston. The pump oiler has an 11-inch angle spout with an angle spout tip. The thumb lever generates a drop or stream of oil and stays primed for instant use. It has a large threaded screw cap on top of the chamber for refuelling. This pump oiler has a powder-coated copper bronze finish. This product includes replaceable spouts.
This heavy-duty pump oiler has a 32-ounce or one-quart capacity. It has a heavy-gauge steel body and a zinc die-cast, high-pressure pump with a precision-machined piston. The pump oiler has an 11-inch angle spout with an angle spout tip. The thumb lever generates a drop or stream of oil and stays primed for instant use. It has a large threaded screw cap on top of the chamber for refuelling. This pump oiler has a powder-coated copper bronze finish. This product includes replaceable spouts.
This industrial pump oiler has a 16-ounce capacity and an eight-inch angle spout with an oil cup cap lifter spout tip. The base is drawn from high-quality steel and has a powder-coated copper bronze finish with a zinc-plated top cap. It has a zinc die-cast, high-pressure pump with a precision-ground piston. The thumb lever generates a drop or stream of oil and stays primed for instant use. This pump oiler has a plated handle and includes a replacement spout.
This industrial pump oiler has a 16-ounce capacity and an eight-inch angle spout with an oil cup cap lifter spout tip. The base is drawn from high-quality steel and has a powder-coated copper bronze finish with a zinc-plated top cap. It has a zinc die-cast, high-pressure pump with a precision-ground piston. The thumb lever generates a drop or stream of oil and stays primed for instant use. This pump oiler has a plated handle and includes a replacement spout.
This heavy-duty pump oiler has a one-pint capacity. It has a heavy-gauge steel body and a zinc die-cast, high-pressure pump with a precision-machined piston. The thumb lever generates a drop or stream of oil and stays primed for instant use. It has a large threaded screw cap on top of the chamber for refuelling. This pump oiler has a powder-coated copper bronze finish.
This heavy-duty pump oiler has a one-pint capacity. It has a heavy-gauge steel body and a zinc die-cast, high-pressure pump with a precision-machined piston. The thumb lever generates a drop or stream of oil and stays primed for instant use. It has a large threaded screw cap on top of the chamber for refuelling. This pump oiler has a powder-coated copper bronze finish.
This 10-inch flexible spout with straight spout tip is a standard replacement for heavy-duty pump oiler model 120-C3. Made with a flexible tubing material, the spout is an optional replacement for all other Goldenrod 120-series heavy-duty pump oil can models. This spout has a 3/8-inch fluid outlet, a 13/32"-24 thread size, and an NS thread type.
This 10-inch flexible spout with straight spout tip is a standard replacement for heavy-duty pump oiler model 120-C3. Made with a flexible tubing material, the spout is an optional replacement for all other Goldenrod 120-series heavy-duty pump oil can models. This spout has a 3/8-inch fluid outlet, a 13/32"-24 thread size, and an NS thread type.
This 11-inch angle spout with angle spout tip is a standard replacement for heavy-duty pump oiler model 120-A2. Made width a seamless tubing material, the spout is an optional replacement for all other Goldenrod 120-series heavy-duty pump oil can models. This spout has a 3/8-inch fluid outlet, a 13/32"-24 thread size, and an NS thread type.
This 11-inch angle spout with angle spout tip is a standard replacement for heavy-duty pump oiler model 120-A2. Made width a seamless tubing material, the spout is an optional replacement for all other Goldenrod 120-series heavy-duty pump oil can models. This spout has a 3/8-inch fluid outlet, a 13/32"-24 thread size, and an NS thread type.
This heavy-duty pump oiler has a 32-ounce or one-quart capacity. It has a heavy-gauge steel body and a zinc die-cast, high-pressure pump with a precision-machined piston. The pump oiler has an 11-inch straight spout with an angle spout tip. The thumb lever generates a drop or stream of oil and stays primed for instant use. It has a large threaded screw cap on top of the chamber for refuelling. This pump oiler has a powder-coated copper bronze finish. This product includes replaceable spouts.
This heavy-duty pump oiler has a 32-ounce or one-quart capacity. It has a heavy-gauge steel body and a zinc die-cast, high-pressure pump with a precision-machined piston. The pump oiler has an 11-inch straight spout with an angle spout tip. The thumb lever generates a drop or stream of oil and stays primed for instant use. It has a large threaded screw cap on top of the chamber for refuelling. This pump oiler has a powder-coated copper bronze finish. This product includes replaceable spouts.
This industrial pump oiler has a 12-ounce capacity and an eight-inch angle spout with an oil cup cap lifter spout tip. The base is drawn from high-quality steel and has a powder-coated copper bronze finish with a zinc-plated top cap. It has a zinc die-cast, high-pressure pump with a precision-ground piston. The thumb lever generates a drop or stream of oil and stays primed for instant use. This pump oiler has a plated handle and includes a replacement spout.
This industrial pump oiler has a 12-ounce capacity and an eight-inch angle spout with an oil cup cap lifter spout tip. The base is drawn from high-quality steel and has a powder-coated copper bronze finish with a zinc-plated top cap. It has a zinc die-cast, high-pressure pump with a precision-ground piston. The thumb lever generates a drop or stream of oil and stays primed for instant use. This pump oiler has a plated handle and includes a replacement spout.
This pistol-type, pump oiler has a 10-ounce capacity and a six-inch flexible spout with straight spout tip. The flexible spout holds its position indefinitely. The container is drawn from high-quality steel and has a powder-coated copper bronze finish with a zinc-plated top cap. It has a zinc die-cast, high-pressure pump with a precision-ground piston. The pump stays primed for instant use. This pump oiler features a flared bottom to prevent tipping.
This pistol-type, pump oiler has a 10-ounce capacity and a six-inch flexible spout with straight spout tip. The flexible spout holds its position indefinitely. The container is drawn from high-quality steel and has a powder-coated copper bronze finish with a zinc-plated top cap. It has a zinc die-cast, high-pressure pump with a precision-ground piston. The pump stays primed for instant use. This pump oiler features a flared bottom to prevent tipping.
This 7 1/2-inch angle spout with angle spout tip is a standard replacement for heavy-duty pump oiler model 120-C2. Made with a seamless tubing material, the spout is an optional replacement for all other Goldenrod 120-series heavy-duty pump oil can models. This spout has a 3/8-inch fluid outlet, a 13/32"-24 thread size, and an NS thread type.
This 7 1/2-inch angle spout with angle spout tip is a standard replacement for heavy-duty pump oiler model 120-C2. Made with a seamless tubing material, the spout is an optional replacement for all other Goldenrod 120-series heavy-duty pump oil can models. This spout has a 3/8-inch fluid outlet, a 13/32"-24 thread size, and an NS thread type.
This pistol-type, pump oiler has a six-ounce capacity and a six-inch flexible spout with straight spout tip. The flexible spout holds its position indefinitely. The container is drawn from high-quality steel and has a powder-coated copper bronze finish with a zinc-plated top cap. It has a zinc die-cast, high-pressure pump with a precision-ground piston. The pump stays primed for instant use. This pump oiler features a flared bottom to prevent tipping.
This pistol-type, pump oiler has a six-ounce capacity and a six-inch flexible spout with straight spout tip. The flexible spout holds its position indefinitely. The container is drawn from high-quality steel and has a powder-coated copper bronze finish with a zinc-plated top cap. It has a zinc die-cast, high-pressure pump with a precision-ground piston. The pump stays primed for instant use. This pump oiler features a flared bottom to prevent tipping.
This 11-inch straight spout with angle spout tip is a standard replacement for heavy-duty pump oiler model 120-A1. Made with a seamless tubing material, the spout is an optional replacement for all other Goldenrod 120-series heavy-duty pump oil can models. This spout has a 3/8-inch fluid outlet, a 13/32"-24 thread size, and an NS thread type.
This 11-inch straight spout with angle spout tip is a standard replacement for heavy-duty pump oiler model 120-A1. Made with a seamless tubing material, the spout is an optional replacement for all other Goldenrod 120-series heavy-duty pump oil can models. This spout has a 3/8-inch fluid outlet, a 13/32"-24 thread size, and an NS thread type.
This heavy-duty pump oiler has a one-pint capacity. It has a heavy-gauge steel body and a zinc die-cast, high-pressure pump with a precision-machined piston. The pump oiler has a 10-inch flexible spout. The thumb lever generates a drop or stream of oil and stays primed for instant use. It has a large threaded screw cap on top of the chamber for refuelling. This pump oiler has a powder-coated copper bronze finish. This product includes a replaceable spout.
This heavy-duty pump oiler has a one-pint capacity. It has a heavy-gauge steel body and a zinc die-cast, high-pressure pump with a precision-machined piston. The pump oiler has a 10-inch flexible spout. The thumb lever generates a drop or stream of oil and stays primed for instant use. It has a large threaded screw cap on top of the chamber for refuelling. This pump oiler has a powder-coated copper bronze finish. This product includes a replaceable spout.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
